[RFC][PATCH 14/26] MIPS: JZ4740: Add Kbuild files
in [Kernel]
|
Prev: [RFC][PATCH 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver
Next: [RFC][PATCH 19/26] USB: Add JZ4740 ohci support
From: Lars-Peter Clausen on 2 Jun 2010 15:20 This patch adds the Kbuild files for the JZ4740 architecture and adds JZ4740 support to the MIPS Kbuild files. Signed-off-by: Lars-Peter Clausen <lars(a)metafoo.de> --- arch/mips/Kconfig | 13 +++++++++++++ arch/mips/Makefile | 6 ++++++ arch/mips/jz4740/Kconfig | 8 ++++++++ arch/mips/jz4740/Makefile | 18 ++++++++++++++++++ 4 files changed, 45 insertions(+), 0 deletions(-) create mode 100644 arch/mips/jz4740/Kconfig create mode 100644 arch/mips/jz4740/Makefile diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cdaae94..4d44bad 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -162,6 +162,18 @@ config MACH_JAZZ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and Olivetti M700-10 workstations. +config MACH_JZ4740 + bool "Ingenic JZ4740 based machines" + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select DMA_NONCOHERENT + select IRQ_CPU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_EARLY_PRINTK + select HAVE_PWM + config LASAT bool "LASAT Networks platforms" select CEVT_R4K @@ -686,6 +698,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" +source "arch/mips/jz4740/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/powertv/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 0b9c01a..a5cb578 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -659,6 +659,12 @@ else load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000 endif +# Ingenic JZ4740 +# +core-$(CONFIG_MACH_JZ4740) += arch/mips/jz4740/ +cflags-$(CONFIG_MACH_JZ4740) += -I$(srctree)/arch/mips/include/asm/mach-jz4740 +load-$(CONFIG_MACH_JZ4740) += 0xffffffff80010000 + cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig new file mode 100644 index 0000000..8a5e850 --- /dev/null +++ b/arch/mips/jz4740/Kconfig @@ -0,0 +1,8 @@ +choice + prompt "Machine type" + depends on MACH_JZ4740 + +endchoice + +config HAVE_PWM + bool diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile new file mode 100644 index 0000000..a803ccb --- /dev/null +++ b/arch/mips/jz4740/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Ingenic JZ4740. +# + +# Object file lists. + +obj-y += prom.o irq.o time.o reset.o setup.o dma.o \ + gpio.o clock.o platform.o timer.o pwm.o serial.o + +obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o + +# board specific support + +# PM support + +obj-$(CONFIG_PM) += pm.o + +EXTRA_CFLAGS += -Werror -Wall -- 1.5.6.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |