Prev: Strange behavior of NetworkManager and keyring [Hardy andGutsy]
Next: Strange routing / NAT issue
From: Eric B. on 3 Apr 2008 22:40
Hi,

I've got a computer running RHEL with a single NIC that is multi-homed with
a single default gateway for everything.
eth0: 192.168.101.54/24
eth0:0 192.168.104.54/24

So far, everything is running fine. The machine is able to respond to
requests coming in to 101.54 and 104.54 without any problems.

However, I have now reached a situation where I need to route my response
packets to 2 different gateways, based on where the packets came in from.
All packets that came in to eth0 have to be routed out via gateway1 and all
packets that came in on eth0:0 have to be routed via gateway2.

How can I accomplish this? I've tried reading the lartc howto for routing
for multiple uplinks/providers, but it doesn't seem to address my issue.
The howto for split access seems to require 2 independent NICs. When I try
to follow the instructions, the ip route add command complains that it
doesn't recognize eth0:0 as a valid interface.

Is there any thing I can do? Can anyone point me to the right place to look
for this? I'm assuming that it shouldn't be too difficult to configure the
system to respond differently based on the incoming address, but not quite
sure how to approach the situation.

Any help, advice and/or suggestions would be greatly appreciated.

Thanks!

Eric




From: Jurgen Haan on 4 Apr 2008 08:50
Eric B. wrote:
> Hi,
>
> I've got a computer running RHEL with a single NIC that is multi-homed with
> a single default gateway for everything.
> eth0: 192.168.101.54/24
> eth0:0 192.168.104.54/24

Using the tool 'ip' you can create priority tables for where to route
which traffic to. I've used this for IP failover, but it should also do
the trick of routing multiple ways.

And instead of trying to route between devices, try routing between subnets.

-R-
From: Eric B. on 4 Apr 2008 10:49
"Jurgen Haan" <jurgen(a)fake.tld> wrote in message
news:47f62414$0$14344$e4fe514c(a)news.xs4all.nl...
> Eric B. wrote:
>> Hi,
>>
>> I've got a computer running RHEL with a single NIC that is multi-homed
>> with
>> a single default gateway for everything.
>> eth0: 192.168.101.54/24
>> eth0:0 192.168.104.54/24
>
> Using the tool 'ip' you can create priority tables for where to route
> which traffic to. I've used this for IP failover, but it should also do
> the trick of routing multiple ways.
>
> And instead of trying to route between devices, try routing between
> subnets.

I've looked into the 'ip' tool, but to be honest with you, I have had
trouble figuring out how to get it to do what I need. I'm still used to the
2.0 kernel route tools, and not quite comfortable yet with iproute2 tools.

Any suggestions / pointers where I might be able to find examples to help
guide me for this?

Thanks,

Eric



--
Posted via a free Usenet account from http://www.teranews.com

From: Jurgen Haan on 4 Apr 2008 11:00
Eric B. wrote:

>
> I've looked into the 'ip' tool, but to be honest with you, I have had
> trouble figuring out how to get it to do what I need. I'm still used to the
> 2.0 kernel route tools, and not quite comfortable yet with iproute2 tools.
>
> Any suggestions / pointers where I might be able to find examples to help
> guide me for this?
>
> Thanks,
>
> Eric
>
>
>

Try LARTC
http://tldp.org/HOWTO/Adv-Routing-HOWTO/
From: Eric B. on 4 Apr 2008 12:04
"Jurgen Haan" <jurgen(a)fake.tld> wrote in message
news:47f64292$0$14356$e4fe514c(a)news.xs4all.nl...
> Eric B. wrote:
>
>>
>> I've looked into the 'ip' tool, but to be honest with you, I have had
>> trouble figuring out how to get it to do what I need. I'm still used to
>> the
>> 2.0 kernel route tools, and not quite comfortable yet with iproute2
>> tools.
>>
>> Any suggestions / pointers where I might be able to find examples to help
>> guide me for this?
>>
>> Thanks,
>>
>> Eric
>>
>>
>>
>
> Try LARTC
> http://tldp.org/HOWTO/Adv-Routing-HOWTO/

I have already read through what seemed to be the relevant sections, but
unfortunately, am no further ahead. Specifically, sections 3, 4 and 11, but
from everything I read, they all seem to be pointing to configuration on a
per device basis. Given that eth0:0 is only a virtual device, the ip tool
doesn't seem to like it very much. From what I can tell, it seems as though
I have to mark the packets on the way in from gw1 differently than those
coming in from gw2, and then use the ip route to add different gateways
based on the routing table, but again, I am having trouble understanding how
to do this with a single device only.

Any ideas?

Thanks,

Eric



--
Posted via a free Usenet account from http://www.teranews.com

 |  Next  |  Last
Pages: 1 2
Prev: Strange behavior of NetworkManager and keyring [Hardy andGutsy]
Next: Strange routing / NAT issue