Prev: Ricoh Caplio R30 resolutions
Next: Canon SD600 terrible for "point and shoot", help me find an alternative!!!
From: Mardon on 6 Feb 2007 09:57
I tried asking this question earlier using a different subject line but got
no responses, so I thought I'd ask again with a simpler subject line.

I'm not satisfied with the % or in-focus shots that I get when shooting
fast-moving sports like basketball with my Canon 20D. I've tried setting
the Canon Custom Function C.Fn-04 to "3" but even after experimenting with
it for awhile, I'm not 100% certain how it works. If I hold in the "*"
button, I think that the autofocus is supposed to track the object under
the in-focus selection point, even if the object moves. Is this correct?
How does it work with multi-focus point selected? Even after experimenting
with it, I can't tell exactly how this feature is best used. Can someone
with experience offer comments?
From: Malcolm Stewart on 6 Feb 2007 10:37
"Mardon" <mgb72mgb(a)hotmail.com> wrote in message
news:Xns98CF747A4C4Bmgb72mgbhotmailcom(a)140.99.99.130...
>I tried asking this question earlier using a different subject line but got
> no responses, so I thought I'd ask again with a simpler subject line.
>
> I'm not satisfied with the % or in-focus shots that I get when shooting
> fast-moving sports like basketball with my Canon 20D. I've tried setting
> the Canon Custom Function C.Fn-04 to "3" but even after experimenting with
> it for awhile, I'm not 100% certain how it works.

I've used this occasionally but nearly always revert to the default setting
after a few shots.
Are you confident that your camera and lenses are focusing correctly with
well defined static objects? (i.e. no front or rear focus issues.)

--
M Stewart
Milton Keynes, UK



--
Posted via a free Usenet account from http://www.teranews.com

From: Mardon on 6 Feb 2007 14:33
Jim Townsend <not(a)real.address> wrote:

> Are you sure this is a focus issue?
>
> I ask because basketball is usually played indoors under artificial
> light. If your shutter speeds are too slow, you'll get motion blur
> which could be mistaken for out-of-focus blur.
>
> What lens are you using and what f numbers and shutter speeds are
> you seeing in the EXIF of your action shots?

Thanks for your feedback.

I agree that there are multiple issues when trying to shoot action sports
in marginal lighting conditions. Motion blur is a problem for sure. I did
a game this weekend and had to shoot at 1/320 or lower to get enough light
at ISO1600. I've tried ISO3200 but my experience is that a slight under-
exposure at ISO1600 is better than a correct exposure at ISO3200 with the
20D. 1/320 is not really fast enough to get clean shots, that are
consistently without motion blur, but it is as fast as I could go given the
available light. They do not allow strobes in this arena. I did lose a lot
of shots to motion blur but I know what that is. What I am hoping someone
will know about is Canon's custom function C.Fn-04 and how to use it to
maximum advantage to achieve focus on a moving subject.

Incidentally, my shots from Sunday are on my website. If you look, you
will see evidence of some images with motion blur, some with poor focus and
some with poor detail from the noise reduction software that I had to use
to get rid of the grain caused by ISO1600 being underexposed. Hopefully,
some are OK too! :)

Here's the URL:
http://www.JustPhotos.ca/galleries/sports/seahawks/20070204/men/

BTW, most shots were with a Canon 70-200mm F/2.8L and a few with a 16-35mm
f/2.8L. Obviously, focus is not such a critical issue with the wide lens.
From: Mardon on 6 Feb 2007 14:38
"Malcolm Stewart" <malcolm_stewart(a)megalith.freeserve.co.uk> wrote:

> I've used this occasionally but nearly always revert to the default
> setting after a few shots.
> Are you confident that your camera and lenses are focusing correctly
> with well defined static objects? (i.e. no front or rear focus
> issues.)

Thanks Malcolm. Yes, my lenses focus fine. I generally use a Canon 70-
200mm f/2.8L for most basketball shots and supplement it with a Canon EF
16-35mm f/2.8L for a few wide shots. You can see my reply to Jim for more
details of what I'm doing.

I have a feeling that putting the focus on the "*" button is a good idea
but I'd really like to have some comments from someone who has a lot of
experience with this. It sounds like perhaps you and I are both in the
'experimental' stage with this setting.
From: Mardon on 6 Feb 2007 15:59
With much embarrassment I have to admit that my problem was really MY
problem. I had C.Fn-04 enabled alright but I'd left the AF on One-Shot
instead of AI Servo. No wonder the "*" button wasn't tracking well! Sorry
for causing a 'wild goose chase'.
 | 
Pages: 1
Prev: Ricoh Caplio R30 resolutions
Next: Canon SD600 terrible for "point and shoot", help me find an alternative!!!