Prev: Graphics card recommendations?
Next: Buffered and Registered Memory: Is it worth the expense?
From: Gypsy Baron on 7 Jan 2008 21:27
Patrick Vervoorn wrote:
>
> In article <47828216.4B23(a)aol.com>, Gypsy Baron <no-one(a)aol.com> wrote:
>
> > The Q6600 G0 stepping is easily overclocked to 3.0 GHZ.
> > I run mine at 3.2 Ghz on air cooling and my temps when
> > under extreme load ( Prime95 ) never approach the max within
> > 10C. Under my normal load the temps are 20-25C below the max.
>
> Out of curiosity, since you give relative values:
>
> What temperature do you see for the Q6600 as a whole?
>
> And what are each of the core's temperatures?
>
> Regards,
>
> Patrick.

Right now just running in 2D mode with browser I'm seeing
Tcase at 38C, core 0 45C, 1= 42C, 2 = 39C and 4 = 45C

My room ambient is 16C and hard drives are at 33C.
My 8800GTS GPU is at 56C.

Running Prime95 now I see Tcase = 50C, 0=58C, 1 = 48C, 2= 47C 3 = 59C.
Tcase MAX for the 6600 G0 is 71C.

I'm using Speedfan with the -15C temperarure adjustment applied.
Measurement readouts using Everest are the same.

CPU: Intel Core 2 Quad Q6600 Kentsfield 2.4GHz LGA 775 Processor
Model BX80562Q6600
M-Board: GIGABYTE GA-P35C-DS3R LGA 775 Intel P35 ATX Intel Motherboard
Memory: 2 X CORSAIR Dominator 2GB DDR2 SDRAM DDR2 1066 (PC2 8500) Dual
Channel Kit ( $GB total )
Video: EVGA 640-P2-N821-AR GeForce 8800GTS 640MB 320-bit GDDR3
HD's: 2 x Seagate Barracuda ES ST3250620NS 250GB 7200 RPM SATA
3.0Gb/s
Power: Thermaltake Purepower RX W0143RU ATX12V 550W Cable Management
Case: COOLER MASTER Centurion 534 RC-534-KKN2-GP ATX Mid Tower Case
Cooling: Rosewill RCX-Z775-EX 92mm 2 Ball PWM CPU Cooler

Paul
 | 
Pages: 1
Prev: Graphics card recommendations?
Next: Buffered and Registered Memory: Is it worth the expense?