|
Solaris 10 zone from flar Hey all, Recently, I had the idea to build a development machine that could provide a separate development possibilities for each of our developers, so they wouldn't get in each others way by screwing up the libraries or so. The problem was that we use Solaris 9 and Solaris 10 systems, and that there is a differ... 7 May 2008 09:20
IPMP - Preventing Outbound Packet Loadbalancin Does anyone know if you can prevent the load sharing for outbound network traffic when using IPMP? I have some application people who say this is causing some problems Inbound is easy by just using the IP, but outbound can use two interfaces/IPs. Thank you! Michelle ... 7 May 2008 12:36
bad PBR sig error Dear All when I installed solaris in new hdd, its completed the installation and gives the error Bad PBR sig error but if I install the RHEL-5 and then Install the solaris its working . so pls help for the same. ... 7 May 2008 05:53
NNTP server causing large jumps in time David Woolley wrote: Dave wrote: Looking at the logs on my Sun Blade 2000 running Solaris 10, I see numerous occasions on which the time has been stepped. Looking at the few only (today, 1/5/2008), I see it was stepped around +0.3 sec at 3 AM, then -0.4 at 4:30 am, then half an hour later at 5am i... 7 May 2008 03:31
OpenSolaris 2008.05 issues A colleague returned from CommunityOne today and brought an OpenSolaris 2008.05 Live CD back with him. So naturally, I immediately took the opportunity to load it up. The machine is a Dell Optiplex 170L, which I had previously loaded a recent release of S10 on. The S10 load was unusable; the network device was ... 7 May 2008 10:08
how to mount second hard drive on Solaris 10? I have computer #1 and computer #2, both running Solaris 10 x86. Computer #2 crashed. I took out the hard drive on computer #2 and installed it as a second hard drive on computer #1 using a second SATA cable. I boot up computer #1. What do I need to do to mount the hard drive from computer #2 so that I can acc... 7 May 2008 02:43
How to handle this LiveUpgrade situation? We have a situation where we need to migrate some Solaris 2.6 servers to Solaris 8 "brandz" zones. The idea was to LiveUpgrade 2.6 to 8, then create a flash archive of the 8 environment for moving to a zone. The problem we have is that the 2.6 servers are completely out of physical disk space and, due to various ... 6 May 2008 23:27
Corrupt "df -o i" output for Solaris ramdisk Folks, Running Solaris 10U3 on sparc: SunOS carnyc04 5.10 Generic_118833-33 sun4v sparc SUNW,Netra-T2000 We're seeing what appears to be a bug when running "df -o i" on a ramdisk, but the ramdisk part may not be relevant: carnyc04:~>df -o i /aqr_pool Filesystem iused ifree %iused Mounted ... 6 May 2008 23:27
Solaris 10 - zoneadm clone command missing On May 6, 10:26 am, Ian Collins <ian-n...(a)hotmail.com> wrote: awl9w0hv5fue...(a)mail.htl22.at wrote: Hi there, I attempted to clone a zone on Solaris 10 using this command: # zoneadm -z tst-ha-z1 clone prd-ha-z1 Which is the source and which is the clone? zoneadm -z cloneZone clone source... 7 May 2008 11:47
internet problem Dear All In Solaris -10, I not able to browse the internet, thogh I am to get ping to my default gateway. my ip is 192.168.51.62 subnet 255.255.255.0 gateway 192.168.51.254 when ping 192.168.51.254 or any other ip of the series 192.168.51.0 , but I am not able to browse t... 6 May 2008 23:27 |