Supreme FX II - gront panel problem
in [Asus]
|
From: bizon on 26 Jun 2008 08:51 Hello At first sorry for my language :P I have that connector: Line R, Line L,EAR R, EAR L, GNS, MIC IN, MIC VCC ("together with MIC IN) How I may connect they for work?
From: Paul on 26 Jun 2008 11:11 bizon wrote: > Hello > At first sorry for my language :P > I have that connector: > Line R, Line L,EAR R, EAR L, GNS, MIC IN, MIC VCC ("together with MIC > IN) > How I may connect they for work? > > The green connector, with 2x5 pin pattern, and one pin that is missing, is where you connect the audio. http://pics.computerbase.de/1/8/1/8/7/16.jpg This is a typical pinout for the 2x5 header. This is what you might see in an Asus motherboard manual, one without Supreme FX. Pin Signal Name Pin Signal Name 1 MIC 2 GND 3 MIC Power 4 NC 5 Line Out (R) 6 NC 7 NC <-------------- Missing Pin 9 Line Out (L) 10 NC Now, using your wiring names, this is how I would wire it. Only five of the wires are used. As far as I know, the "EAR" signals are the ones that go to the headphone jack, and that is why I've wired them to pin 5 and 7. Your "Line R" and "Line L" wires will not be used, and can be left dangling and unconnected. Pin Signal Name Pin Signal Name 1 "MIC IN" 2 GND 3 "MIC VCC" 4 5 "EAR R" 6 7 <-------------- Missing Pin 9 "EAR L" 10 In addition, you may want to check the motherboard documentation, for mention of AC'97 setting. The header wiring shown in the above table, assumes you set the motherboard up for AC'97 header style, which may be mentioned in the manual. The best way to search your motherboard manual, is to download the Acrobat PDF version from the support.asus.com web site. If you mention the model name/number of the motherboard, I can look in the manual and tell you what might work. Paul
From: bizon on 27 Jun 2008 09:20 I do it like U wrote and it's work! but in only 50% Header work but microphone not So i try dont used MIC VCC, only MIC IN, but they dont work I have manual of my motherboard [p5e] but she didn't have to any info about connection audio front panel Again sorry 4 language :D and thx for help in 50%
From: Paul on 27 Jun 2008 14:03 bizon wrote: > I do it like U wrote and it's work! but in only 50% > Header work but microphone not > So i try dont used MIC VCC, only MIC IN, but they dont work > > I have manual of my motherboard [p5e] but she didn't have to any info > about connection audio front panel > > Again sorry 4 language :D > and thx for help in 50% > Have you selected the microphone, via the sound control panel ? You have two microphones. The rear of the computer has a microphone jack. And your front panel has a microphone as well. First, see if plugging in the front microphone, that it is detected by the audio wizard. It could be, that you haven't selected the microphone, via the control panel, and that is why the input signal is not coming in. I cannot find a reference on the Asus site, for Supreme FX pinout, so the pinout I provided is related to the Intel standard, and is my best *guess* as to the correct pinout to use. The fact that your headphones work, means three of the wires are in the correct position. My guess would be, the other two wire positions are correct, and the problem is a software problem. Paul
From: bizon on 28 Jun 2008 07:18
'ImageShack - Hosting :: aasu3.jpg' (http://img141.imageshack.us/my.php?image=aasu3.jpg) Yes, I selected microphone but it's another problem Microphone work - header not I just connect MIC VCC, and microphone work, just like u wrote, ear in position but header doesnt work black magic... |