Prev: C16 played Atari 2600?
Next: CommVEx v2 2006 photos
From: redrumloa on 27 Jan 2008 11:52
Here is what I am getting.

Powered up on a loaded system at pin #:
1) 5.2VDC (& minimal 4.9mVAC ripple) to ground
2) Ground
3) 4.98VAC (& 4.73VDC present) to ground
4) Ground
5) 5.56VAC (& 4.72VDC present) to ground

Ok, now pins 3 to 5 I get 10.04VAC (no DC present).

Is this normal? I thought pins 3 and 5 should have 9VAC each?

Yes I am posting a lot here :-)
From: redrumloa on 27 Jan 2008 12:10
Ok, now I find a C= pinout that does show the 9VAC *between* 3 to 5. I
suppose the 10.04VAC is fine then? Only about ~11% over.
From: Klompmeester on 27 Jan 2008 22:04

"redrumloa" <amigaguy(a)bellsouth.net> wrote in message
news:4987e1bf-01a7-42c8-84d2-156918ba15da(a)q21g2000hsa.googlegroups.com...
> Ok, now I find a C= pinout that does show the 9VAC *between* 3 to 5. I
> suppose the 10.04VAC is fine then? Only about ~11% over.

Are you checking it under load, if not, do so.

Should be close to 9VAC.


From: redrumloa on 28 Jan 2008 07:32
On Jan 27, 10:04 pm, "Klompmeester" <whowh...(a)andwhy.com> wrote:
> "redrumloa" <amiga...(a)bellsouth.net> wrote in message
>
> news:4987e1bf-01a7-42c8-84d2-156918ba15da(a)q21g2000hsa.googlegroups.com...
>
> > Ok, now I find a C= pinout that does show the 9VAC *between* 3 to 5. I
> > suppose the 10.04VAC is fine then? Only about ~11% over.
>
> Are you checking it under load, if not, do so.
>
> Should be close to 9VAC.

Under load? Yes as in the 128 and SuperCPU are both turned on.
From: Klompmeester on 28 Jan 2008 09:23

"redrumloa" <amigaguy(a)bellsouth.net> wrote in message
news:c1a2a227-47b8-411d-94b1-6fc92ac7c9df(a)v17g2000hsa.googlegroups.com...
On Jan 27, 10:04 pm, "Klompmeester" <whowh...(a)andwhy.com> wrote:
> "redrumloa" <amiga...(a)bellsouth.net> wrote in message
>
> news:4987e1bf-01a7-42c8-84d2-156918ba15da(a)q21g2000hsa.googlegroups.com...
>
> > Ok, now I find a C= pinout that does show the 9VAC *between* 3 to 5. I
> > suppose the 10.04VAC is fine then? Only about ~11% over.
>
> Are you checking it under load, if not, do so.
>
> Should be close to 9VAC.

Under load? Yes as in the 128 and SuperCPU are both turned on.

Ok, well I would think that 10.04 V is somewhat higher then I would expect
to see.




 |  Next  |  Last
Pages: 1 2
Prev: C16 played Atari 2600?
Next: CommVEx v2 2006 photos