From: Vitthal on
I am having trouble making ougoing cal or answering incoming call.
Whwn I try to call out phone errors with the message unknown number.
For incoming call, it rings but when I pick the call nothing happens,
put thr rciever back on hook, the phone carries on ringing. I am in UK
and just trying to set up test system with one analogue. Any help will
be most appreciated. My config of the 2811 router is posted below.
Thank you.

hostname Test-CME
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 0
network-clock-participate wic 1
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.139.139.1 10.139.139.10
!
ip dhcp pool host
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
!
ip dhcp pool data
network 10.139.139.0 255.255.255.0
default-router 10.139.139.1
dns-server 10.139.139.5
!
!
!
!
voice-card 0
no dspfarm
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
sip
header-passing
registrar server expires max 3600 min 3600
!
!
!

!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
no ip mroute-cache
duplex auto
speed auto
no shut
!
interface FastEthernet0/1.2
description ** Data VLAN **
encapsulation dot1Q 2
ip address 10.139.139.1 255.255.255.0
!
interface FastEthernet0/1.3
description ** Voice VLAN **
encapsulation dot1Q 3
ip address 10.10.10.1 255.255.255.0
!
!
!
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
!
!
!
tftp-server flash:S00104000100.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:cnu70.2-7-6-26.sbn
tftp-server flash:Jar70.2-9-2-26.sbn
tftp-server flash:TERM70.7-0-3-0S.loads
tftp-server flash:CVM70.2-0-2-26.sbn
!
control-plane
!
!
!
!
voice-port 0/3/0
connection plar opx 202
caller-id enable
!
!
!
dial-peer voice 1 pots
incoming called-number .
destination-pattern 9T
port 0/3/0
!
!
!
!
telephony-service
load 7914 S00104000100
load 7941 TERM41.7-0-3-0S
load 7961 TERM41.7-0-3-0S
load 7970 TERM70.7-0-3-0S
max-ephones 20
max-dn 40
ip source-address 10.10.10.1 port 2000
calling-number initiator
service phone videoCapability 1
system message MKC CME
url services http://10.10.10.1/voiceview/common/login.do
url authentication
http://10.10.10.1/voiceview/authentication/authenticate.do
time-zone 21
date-format dd-mm-yy
voicemail 600
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name mkcsupport secret 0 test
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
secondary-dialtone 9
create cnf-files
!
!
ephone-dn 1 dual-line
number 201
label 201
description Sarah
name Sarah
!
!
ephone-dn 2 dual-line
number 202
label 202
description Vitthal
name User2 Vitthal
!
!
ephone-dn 3 dual-line
number 203 secondary
label 203
description Neil
name User3 Neil
!
!
ephone-dn 7
number 701
park-slot
!
!
ephone-dn 8
number 702
park-slot
!
!
ephone 1
video
username "user1" password 201
mac-address 0018.18EE.947F
type 7961 addon 1 7914
button 1:1
!
!
ephone 2
video
username "user2" password 202
mac-address 0018.18BB.B973
type 7941
button 1:2
!
!
!
ephone 3
video
username "user3" password 203
mac-address 0018.1885.6BA2
type 7970
button 1:3
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
password Mkc1986
login
!
scheduler allocate 20000 1000
ntp master

From: www.BradReese.Com on
Hi Vitthal,

You may wish to investigate Cisco's Understanding FXO Disconnect
Problem:

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

Hope this helps.

Brad Reese
Cisco IOS Software - Compatible Partner Matrix by Technology
http://www.BradReese.Com
1293 Hendersonville Road, Suite 17
Asheville, North Carolina USA 28803
USA & Canada: 877-549-2680
International: 828-277-7272
Fax: 775-254-3558
AIM: R2MGrant
BradReese.Com - Global Cisco Systems Pre-Sales Support
http://www.bradreese.com/contact-us.htm#CISCO

From: Vitthal on
Hi Brad

Thanks for the link. I have read through the document and have will
tried some of the suggestions without any lucky out some. Any other
hint will be most appreciated.

Regards,

Vitthal


www.BradReese.Com wrote:
> Hi Vitthal,
>
> You may wish to investigate Cisco's Understanding FXO Disconnect
> Problem:
>
> http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml
>
> Hope this helps.
>
> Brad Reese
> Cisco IOS Software - Compatible Partner Matrix by Technology
> http://www.BradReese.Com
> 1293 Hendersonville Road, Suite 17
> Asheville, North Carolina USA 28803
> USA & Canada: 877-549-2680
> International: 828-277-7272
> Fax: 775-254-3558
> AIM: R2MGrant
> BradReese.Com - Global Cisco Systems Pre-Sales Support
> http://www.bradreese.com/contact-us.htm#CISCO

From: www.BradReese.Com on
Hi Vitthal,

Regarding your "outbound call issue" try this web page

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00803736c1.shtml#prob_desc

and configuring voice ports:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca620.html

Sincerely,

Brad Reese
Cisco Repair
http://www.bradreese.com/cisco-big-iron-repair.htm

From: Vitthal on
Hi Brad

Thanks for the links. Just had a quick read through. I will get back to
you once I have tried some of the suggestions.

Regards,

Vitthal
www.BradReese.Com wrote:
> Hi Vitthal,
>
> Regarding your "outbound call issue" try this web page
>
> http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00803736c1.shtml#prob_desc
>
> and configuring voice ports:
>
> http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca620.html
>
> Sincerely,
>
> Brad Reese
> Cisco Repair
> http://www.bradreese.com/cisco-big-iron-repair.htm

 | 
Pages: 1
Prev: 3620 boot from tftp
Next: portfast