Prev: [Samba] login ldap pdc
Next: [Samba] check password script
From: Martin Zielinski on 15 Apr 2008 11:40
Hello,

does the problem also occur, when you add a new printer and assign a
driver to it? When you try to connect to the printer - do it as "normal"
user, so the printer is not automaticly published in the AD.

If yes, please try to set "default devmode = No" in the smb.conf and
see, what happens.

I simply can't reproduce it, though you're the second one who reports
it. So - if possible - could you provide a network trace from the
connection attempt, the ntprinters.tdb, ntdrivers.tdb and a list of the
installed drivers? Let's see, what's so special in your installation ;-)

Greets,

Martin

Boutan, Paul R. schrieb:
> I am running samba 3.0.28 on linux servers using ADS security, without
> any problem.
>
>
>
> However when I added a vista workstation to the mix, it simply cannot
> connect to my printers. I can connect to my data/ or disk shares again
> without any problem from both 64bit vista, and 32 bit vista.
>
>
>
> When I try to access my printers though I get "Windows cannot connect
> to the printer, Operation could not be completed (error 0x0000000d)
>
>
>
> I have looked at everything, tried numerous drivers, settings, and so
> on, but this error is not documented anywhere for this condition. Any
> ideas?
>
>
>
> Thanks
>
>
>
> boutapr(a)chevron.com
>

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
From: Martin Zielinski on 16 Apr 2008 04:30
Hi Paul,

what exactly appears to work?
Disable the "default devmode", or the publish in the ADS?

Previously we had an issue with registry entries. And there are some
alignment issues.

0x0d error means "The data is invalid", so I suspect either a device
mode alignment problem or even the devicemode data. But I may be wrong.
It might also rely to, wether the printer is published in ADS or not.

So, if it works at the moment and the issue occurs again later, it would
be helpful, if you could tell, what exactly you have done (whoo, hope
you understand my english).

Bye,

Martin

Boutan, Paul R. schrieb:
> Martin,
>
> That appears to have worked !!!! yahoooo.... I'll look it up and see
> why... I will reserve total success for after I have tried every option,
> deleted all the drivers, and tried it again...
>
> But on the up side, I've asked a few folks to try it and it has worked.
> So THANK YOU !!!
>
> Paul Boutan
>
[...]
>
> -----Original Message-----
> From: Martin Zielinski [mailto:mz(a)seh.de]
> Sent: Tuesday, April 15, 2008 10:30 AM
> To: Boutan, Paul R.
> Cc: samba(a)samba.org
> Subject: Re: [Samba] Vista problem, with ADS samba

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
From: Martin Zielinski on 23 Apr 2008 05:00
Hello,

Just an update regarding Vista vs. Samba:

It appears, that the problem is, that the driver on the Samba server
does not contain any "dependent files".
In this case, Samba returns an empty string in a DRIVER_INFO_3 response.
This behaviour is different to XP - and different to what the msdn
states (NULL or a list of *two* empty strings).
XP returns a NULL pointer. Vista reacts on the malformed struct with a
0x0000000d error (Invalid data) and stops the printer installation.

I don't think, it's critical since the most (if not all) real-live
drivers actually do have dependent files. The driver in this case have
been installed via rpcclient and self-compiled.

Attached is a text representation of a wireshark trace as proof.

Bye,

Martin

Boutan, Paul R. schrieb:
> I am running samba 3.0.28 on linux servers using ADS security, without
> any problem.
>
>
>
> However when I added a vista workstation to the mix, it simply cannot
> connect to my printers. I can connect to my data/ or disk shares
again
> without any problem from both 64bit vista, and 32 bit vista.
>
>
>
> When I try to access my printers though I get "Windows cannot connect
> to the printer, Operation could not be completed (error 0x0000000d)
>
>
>
> I have looked at everything, tried numerous drivers, settings, and so
> on, but this error is not documented anywhere for this condition. Any
> ideas?
>
>
>
> Thanks
>
>
>
> boutapr(a)chevron.com
>


 | 
Pages: 1
Prev: [Samba] login ldap pdc
Next: [Samba] check password script