Prev: P4P800-E: Getting Goofey After New Memory Install?
Next: Looking for some guidance / starting place
From: ytrewq on 14 Jun 2008 07:21
I assume you are running a 64 bit OS like Vista64 or a 64 bit Linux distro.
What happens if you increase voltage of RAM and NB?
Have you consulted Mushkin Support Forum?
Personally, I would not replace this mobo/RAM without more
investigation......
======================
"J" <johnknuhtsenSP(a)Mmail.dk> wrote in message
news:hng454tc9mg6lbdo4skm0ta0dbsq1stbtb(a)4ax.com...
>
> As said.
>
> I have bad experience with
>
> - MSI Neo2-FR
> - Gigabyte EP35C-DS3R
>
> They make booting recycles and does not come through, when I insert
> all 8 Gb ram. With 3 x 2 Gb they boot.
> The ram is 4 identical sticks of Mushkin DDR2 2 Gb pc6400 (1.8 volt).
> This is a recommended brand for MSI.
>
> Do you know a good combination of ram and motherboard ? I prefer with
> DDR2 ram. The cpu is wolfdale E8400.
>
> The PSU is Chill Innovation 510 watt.
>
> Thanking you in advance !
>
> John


From: J on 15 Jun 2008 04:37
On Sat, 14 Jun 2008 07:21:26 -0400, "ytrewq" <ytrewq(a)uiop.com> wrote:

>I assume you are running a 64 bit OS like Vista64 or a 64 bit Linux distro.
>What happens if you increase voltage of RAM and NB?
>Have you consulted Mushkin Support Forum?

Thank you, I will try to find that forum.

best regards

John

>Personally, I would not replace this mobo/RAM without more
>investigation......
>======================
>"J" <johnknuhtsenSP(a)Mmail.dk> wrote in message
>news:hng454tc9mg6lbdo4skm0ta0dbsq1stbtb(a)4ax.com...
>>
>> As said.
>>
>> I have bad experience with
>>
>> - MSI Neo2-FR
>> - Gigabyte EP35C-DS3R
>>
>> They make booting recycles and does not come through, when I insert
>> all 8 Gb ram. With 3 x 2 Gb they boot.
>> The ram is 4 identical sticks of Mushkin DDR2 2 Gb pc6400 (1.8 volt).
>> This is a recommended brand for MSI.
>>
>> Do you know a good combination of ram and motherboard ? I prefer with
>> DDR2 ram. The cpu is wolfdale E8400.
>>
>> The PSU is Chill Innovation 510 watt.
>>
>> Thanking you in advance !
>>
>> John
>

 | 
Pages: 1
Prev: P4P800-E: Getting Goofey After New Memory Install?
Next: Looking for some guidance / starting place