From: Edgard Kniriem on
Hi
I�ve just conected a 2nd HD (Samsung 80 GB). I�ve changed it from another
computer also as a 2nd primary HD and it was O.K. It�s formated NTFS and
working fine. Partition Magic did recognized it. Acronis True Image found it
and I was able to made a Clone from a Seagate 250 GB (only 10% full). The
bios Setup recognize it and after the Clone I could even boot from it
changing the boot sequence in BIOS. Windows Disk Manager show it either.
Then came the problem: Windows Explorer doesn�t show it and Second Copy also
ignores it. I want to configure Second Copy to make exact copies of
everything I do in disk 01, evry thing that change while I�m working at
every 2 hours.
At least I have a clone I can use but I want it exactly as the original.
Any hint?
TIA
Edgard Kniriem





--


From: Edgard Kniriem on
Thank you Andrew.
I�ve done it but "make active" was greyed. I tried to change the drive
letter and it worked. It appeared either in Windows Explorer and in Second
Copy and I�ve already configured it to work properly.
Thank again
Edgard



"Andrew E." <eckrichco(a)msn.com> escreveu na mensagem
news:D4531DBA-4F8E-45CA-9847-88BE4249960E(a)microsoft.com...
> Try start,run,type: diskmgmt.msc In msc,L.click on the hd,go to actions,
> all,locate & select "make active",close out msc.
>
> "Edgard Kniriem" wrote:
>
>> Hi
>> I�ve just conected a 2nd HD (Samsung 80 GB). I�ve changed it from another
>> computer also as a 2nd primary HD and it was O.K. It�s formated NTFS and
>> working fine. Partition Magic did recognized it. Acronis True Image found
>> it
>> and I was able to made a Clone from a Seagate 250 GB (only 10% full). The
>> bios Setup recognize it and after the Clone I could even boot from it
>> changing the boot sequence in BIOS. Windows Disk Manager show it either.
>> Then came the problem: Windows Explorer doesn�t show it and Second Copy
>> also
>> ignores it. I want to configure Second Copy to make exact copies of
>> everything I do in disk 01, evry thing that change while I�m working at
>> every 2 hours.
>> At least I have a clone I can use but I want it exactly as the original.
>> Any hint?
>> TIA
>> Edgard Kniriem
>>
>>
>>
>>
>>
>> --
>>
>>
>> .
>>


From: Edgard Kniriem on
Thank you Andrew.
I did it but the "make active" msg was greyed than I decided to change the
drive letter and the Disk 2 was recognized. Anyway I learned one more
lesson. Thanks a lot.
Edgard

--
"Andrew E." <eckrichco(a)msn.com> escreveu na mensagem
news:D4531DBA-4F8E-45CA-9847-88BE4249960E(a)microsoft.com...
> Try start,run,type: diskmgmt.msc In msc,L.click on the hd,go to actions,
> all,locate & select "make active",close out msc.
>
> "Edgard Kniriem" wrote:
>
>> Hi
>> I�ve just conected a 2nd HD (Samsung 80 GB). I�ve changed it from another
>> computer also as a 2nd primary HD and it was O.K. It�s formated NTFS and
>> working fine. Partition Magic did recognized it. Acronis True Image found
>> it
>> and I was able to made a Clone from a Seagate 250 GB (only 10% full). The
>> bios Setup recognize it and after the Clone I could even boot from it
>> changing the boot sequence in BIOS. Windows Disk Manager show it either.
>> Then came the problem: Windows Explorer doesn�t show it and Second Copy
>> also
>> ignores it. I want to configure Second Copy to make exact copies of
>> everything I do in disk 01, evry thing that change while I�m working at
>> every 2 hours.
>> At least I have a clone I can use but I want it exactly as the original.
>> Any hint?
>> TIA
>> Edgard Kniriem
>>
>>
>>
>>
>>
>> --
>>
>>
>> .
>>