Prev: newbie question re: wireless printer setup
Next: Weird conflicting IP issue
From: rmellison on 16 Apr 2008 18:23
I have a WinXP home PC hardline connected to a wireless router. I can connect
to the internet via the PC with no problem, and I can connect my WinXP laptop
to the internet via the wireless router. Both laptop and PC Workgroup name is
MSHOME; I can see the PC in MSHOME on the PC, but I cannot see the laptop. I
cannot see either computer in MSHOME on the laptop. All I want to do is
transfer files from shared folders freely between PC and laptop... Any advice?
From: Lem on 17 Apr 2008 00:54
rmellison wrote:
> I have a WinXP home PC hardline connected to a wireless router. I can connect
> to the internet via the PC with no problem, and I can connect my WinXP laptop
> to the internet via the wireless router. Both laptop and PC Workgroup name is
> MSHOME; I can see the PC in MSHOME on the PC, but I cannot see the laptop. I
> cannot see either computer in MSHOME on the laptop. All I want to do is
> transfer files from shared folders freely between PC and laptop... Any advice?

Here's the standard networking advice from MS-MVP Malke. Start by
running the Network Setup Wizard (*not* the Wireless Network Setup
Wizard) on both computers.
************************************
Here are general network troubleshooting steps. Not everything may be
applicable to your situation, so just take the bits that are. It may
look daunting, but if you follow the steps at the links and suggestions
below systematically and calmly, you will have no difficulty in setting
up your sharing.

For XP, start by running the Network Setup Wizard on all machines (see
caveat in Item A below).

Problems sharing files between computers on a network are generally
caused by 1) a misconfigured firewall; or 2) inadvertently running two
firewalls such as the built-in Windows Firewall and a third-party
firewall; and/or 3) not having identical user accounts and passwords on
all Workgroup machines; 4) trying to create shares where the operating
system does not permit it.

For XP and Windows 2003 Server, MVP Hans-Georg Michna has an excellent
small network troubleshooter. It may also be useful with Vista.

http://winhlp.com/wxnet.htm

Here are some general networking tips for home/small networks:

A. Configure firewalls on all machines to allow the Local Area Network
(LAN) traffic as trusted. With Windows Firewall, this means allowing
File/Printer Sharing on the Exceptions tab. Normally running the Network
Setup Wizard on XP will take care of this for those machines.The only
"gotcha" is that this will turn on the XPSP2 Windows Firewall. If you
aren't running a third-party firewall or have an antivirus with
"Internet Worm Protection" (like Norton 2006/07) which acts as a
firewall, then you're fine. With third-party firewalls, I usually
configure the LAN allowance with an IP range. Ex. would be
192.168.1.0-192.168.1.254. Obviously you would substitute your correct
subnet. Do not run more than one firewall.

B. For ease of organization, put all computers in the same Workgroup.
This is done from the System applet in Control Panel, Computer Name tab.

C. Create matching user accounts and passwords on all machines. You do
not need to be logged into the same account on all machines and the
passwords assigned to each user account can be different; the
accounts/passwords just need to exist and match on all machines. If you
wish a machine to boot directly to the Desktop (into one particular
user's account) for convenience, you can do this. The instructions at
this link work for both XP and Vista:

Configure Windows to Automatically Login (MVP Ramesh) -
http://windowsxp.mvps.org/Autologon.htm

D. If one or more of the computers is XP Pro or Media Center:

1. If you need Pro's ability to set fine-grained permissions, turn off
Simple File Sharing (Folder Options>View tab) and create identical user
accounts/passwords on all computers.

2. If you don't care about using Pro's advanced features, leave the
Simple File Sharing enabled. Simple File Sharing means that Guest
(network) is enabled. This means that anyone without a user account on
the target system can use its resources. This is a security hole but
only you can decide if it matters in your situation.

E. Create shares as desired. XP Home does not permit sharing of users'
home directories (My Documents) or Program Files, but you can share
folders inside those directories. A better choice is to simply use the
Shared Documents folder.

--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm
 | 
Pages: 1
Prev: newbie question re: wireless printer setup
Next: Weird conflicting IP issue