Prev: Matlab and Windows Mobile 5.0
Next: 3D plotting
From: Chris on 5 May 2008 08:43
Hello all.
I have a problem that is beyond my level of knowledge that I
thought the matlab community may be able to help. I know
matlab reasonably well, the problem is that I do not know C.
I have a small chunk of C-code that I want to get to work
with matlab. I would imagine that the easiest is to rewrite
it in matlab, but I also think that I could somehow write it
and compile it as a mex file and run it from matlab (I have
never done that but I guess you are able to do that). The
c-code is only a couple of lines long (there is a big table
in the middle it appears to be of lookup values). The goal
is to compute a checksum of a string. The input to the
c-code is either the string itself as “buf” or as a stream
of ascii characters and the length of the string “len” – I
am not sure which – maybe someone can tell me? Can anyone
point me in the right direction of how to rewrite this loop
in matlab? I am assuming that in matlab, we can just let
buf=our string, seed=0521 (hex), crc_tbl=the table listed in
hex, then the loop.
Any suggestions would be great.
Thanks in advance.
Chris
Here is the c-code. The loop is what I do not understand.



unsigned int rtpcrc(char *buf, unsigned int len)
{
unsigned int seed = 0x0521;
static unsigned int crc_tbl[] =
{
0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241,
0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440,
0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40,
0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841,
0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40,
0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41,
0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641,
0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040,
0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240,
0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441,
0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41,
0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840,
0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41,
0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40,
0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640,
0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041,
0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240,
0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441,
0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41,
0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840,
0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41,
0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40,
0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640,
0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041,
0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241,
0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440,
0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40,
0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841,
0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40,
0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41,
0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641,
0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040,
};
while(len--)
seed = crc_tbl[*((unsigned char *) buf)++ ^ (unsigned char)
seed] ^
(unsigned char) (seed >> 8);
return(seed);
}

From: James Tursa on 5 May 2008 15:51

Here is your c-code turned into a mex function. One of the
statements was illegal and I had to change it. To get the
MATLAB mex function follow these steps:

Save the code as file crc.c (or some other name.c) somewhere
in the MATLAB path and change your current directory to that
directory, then issue the following command at the MATLAB
prompt:

mex -setup

MATLAB will respond with:

Please choose your compiler for building external interface
(MEX) files:

Would you like mex to locate installed compilers [y]/n?

Press the Enter key, and then select the number of lcc from
the list.

Then to create the mex function do this:

mex crc.c

MATLAB will compile the function for you. You now have a
function called crc available. You can pass it a MATLAB
character string and it will return your integer code
result. For example:

>> crc('aksdljfhklajsdfaskdljfhklasfdh')

ans =

16001

>> class(ans)

ans =

uint32

>>

It shouldn't be too hard to convert this to MATLAB code,
btw. If you want help with that let me know.

James Tursa

------------------------------------------------

#include "mex.h"

unsigned int rtpcrc(char *buf, unsigned int len); // prototype

void mexFunction(int nlhs, mxArray *plhs[],int nrhs, const
mxArray *prhs[])
{
char *buf;
unsigned int len, seed;
unsigned int *pseed;

if( nrhs != 1 ) // check number of inputs
mexErrMsgTxt("Need exactly one input");

if( !mxIsChar( prhs[0] ) ) // check type of input
mexErrMsgTxt("Input must be a character string");

buf = mxArrayToString( prhs[0] ); // convert input to c
style string
if( buf == NULL ) // check for out of memory result
mexErrMsgTxt("Out of memory");

len = (unsigned int) mxGetNumberOfElements( prhs[0] );
// length of string

seed = rtpcrc( buf, len ); // get the result
mxFree( buf ); // don't need buf anymore

switch( sizeof( seed ) ) // load up the result depending
on number of bytes
{
case 2:
plhs[0] = mxCreateNumericMatrix( 1, 1,
mxUINT16_CLASS, mxREAL );
break;
case 4:
plhs[0] = mxCreateNumericMatrix( 1, 1,
mxUINT32_CLASS, mxREAL );
break;
case 8:
plhs[0] = mxCreateNumericMatrix( 1, 1,
mxUINT64_CLASS, mxREAL );
break;
}
pseed = (unsigned int *) mxGetData( plhs[0] ); // get
address of data
*pseed = seed; // copy result into data
}

//---------------------------------------------------------------

unsigned int rtpcrc(char *buf, unsigned int len)
{
unsigned char *ubuf = (unsigned char *) buf;
unsigned int seed = 0x0521;
static unsigned int crc_tbl[] =
{
0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241,
0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440,
0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40,
0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841,
0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40,
0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41,
0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641,
0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040,
0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240,
0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441,
0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41,
0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840,
0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41,
0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40,
0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640,
0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041,
0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240,
0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441,
0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41,
0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840,
0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41,
0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40,
0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640,
0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041,
0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241,
0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440,
0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40,
0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841,
0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40,
0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41,
0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641,
0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040,
};
while(len--)
seed = crc_tbl[*(ubuf++) ^ (unsigned char) seed] ^
(unsigned char) (seed >> 8);
return(seed);
}

 | 
Pages: 1
Prev: Matlab and Windows Mobile 5.0
Next: 3D plotting