device reported invalid CHS sector 0 / NCQ disabled due to excessive errors
in [Kernel]
|
Prev: device reported invalid CHS sector 0 / NCQ disabled due to excessive errors
Next: Your mailbox has exceeded the storage limit
From: Richard Genoud on 25 Apr 2010 13:00 2010/4/25 Robert Hancock <hancockrwd(a)gmail.com>: > Usually this sort of thing is some kind of hardware problem - either a > firmware bug in the drive, or else a SATA link communication problem like a > bad cable, or the drives not getting clean power under load. I'll try other sata cables, but I'm afraid, like you said, that it's a firmware bug... > The log is missing the detail messages indicating what actually happened - > can you post the output from dmesg instead? you're right, there's more informations in there : [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.9-hpet (richard(a)desktop) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #1 SMP Tue Apr 13 18:59:03 CEST 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31.9-hpet root=/dev/md1 ro splash enable_mtrr_cleanup [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf770000 (usable) [ 0.000000] BIOS-e820: 00000000bf770000 - 00000000bf788000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 4GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 1GB, type UC [ 0.000000] total RAM coverred: 4096M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf770 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf770000 (usable) [ 0.000000] modified: 00000000bf770000 - 00000000bf788000 (ACPI data) [ 0.000000] modified: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf770000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf770000 page 4k [ 0.000000] kernel direct mapping tables up to bf770000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ 13000-19000 [ 0.000000] RAMDISK: 33f4a000 - 37fef38e [ 0.000000] ACPI: RSDP 00000000000fb970 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf770100 0006C (v01 022310 XSDT1106 20100223 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf770290 000F4 (v03 022310 FACP1106 20100223 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7704a0 0EE9D (v01 A1326 A1326001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf788000 00040 [ 0.000000] ACPI: APIC 00000000bf770390 000CC (v01 022310 APIC1106 20100223 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf770460 0003C (v01 022310 OEMMCFG 20100223 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf788040 00072 (v01 022310 OEMB1106 20100223 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf77f7a0 00038 (v01 022310 OEMHPET 20100223 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000bf7880c0 00090 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: ASPT 00000000bf77fa40 00034 (v06 022310 PerfTune 20100223 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf77fa80 000B0 (v01 022310 OEMOSFR 20100223 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf78ac00 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000003ffff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019c720c] TEXT DATA BSS ==> [0001000000 - 00019c720c] [ 0.000000] #3 [0033f4a000 - 0037fef38e] RAMDISK ==> [0033f4a000 - 0037fef38e] [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #5 [00019c8000 - 00019c82bc] BRK ==> [00019c8000 - 00019c82bc] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf770 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1046270 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3822 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765864 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf770000 - 00000000bf788000 [ 0.000000] PM: Registered nosave memory: 00000000bf788000 - 00000000bf7dc000 [ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028246 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31.9-hpet root=/dev/md1 ro splash enable_mtrr_cleanup [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3984372k/5242880k available (5262k kernel code, 1057800k absent, 200708k reserved, 2952k data, 664k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:472 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2808.454 MHz processor. [ 0.001084] Console: colour VGA+ 80x25 [ 0.001086] console [tty0] enabled [ 0.013995] allocated 41943040 bytes of page_cgroup [ 0.014043] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.014215] hpet clockevent registered [ 0.014221] alloc irq_desc for 24 on node 0 [ 0.014223] alloc kstat_irqs on node 0 [ 0.014228] alloc irq_desc for 25 on node 0 [ 0.014229] alloc kstat_irqs on node 0 [ 0.014231] alloc irq_desc for 26 on node 0 [ 0.014232] alloc kstat_irqs on node 0 [ 0.014235] alloc irq_desc for 27 on node 0 [ 0.014236] alloc kstat_irqs on node 0 [ 0.014238] alloc irq_desc for 28 on node 0 [ 0.014239] alloc kstat_irqs on node 0 [ 0.014241] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.014293] Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.90 BogoMIPS (lpj=28084540) [ 0.014397] Security Framework initialized [ 0.014452] AppArmor: AppArmor initialized [ 0.014714] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.015490] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.015841] Mount-cache hash table entries: 256 [ 0.015957] Initializing cgroup subsys ns [ 0.016003] Initializing cgroup subsys cpuacct [ 0.016049] Initializing cgroup subsys memory [ 0.016096] Initializing cgroup subsys freezer [ 0.016141] Initializing cgroup subsys net_cls [ 0.016193] CPU: Physical Processor ID: 0 [ 0.016237] CPU: Processor Core ID: 0 [ 0.016283] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016354] CPU: L2 cache: 256K [ 0.016397] CPU: L3 cache: 8192K [ 0.016440] CPU 0/0x0 -> Node 0 [ 0.016484] mce: CPU supports 9 MCE banks [ 0.016535] CPU0: Thermal monitoring enabled (TM1) [ 0.016582] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 [ 0.016791] using mwait in idle threads. [ 0.016835] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. [ 0.016938] ... version: 3 [ 0.016982] ... bit width: 48 [ 0.017027] ... generic counters: 4 [ 0.017071] ... value mask: 0000ffffffffffff [ 0.017117] ... max period: 000000007fffffff [ 0.017163] ... fixed-purpose counters: 3 [ 0.017208] ... counter mask: 000000070000000f [ 0.019404] ACPI: Core revision 20090521 [ 0.115249] Setting APIC routing to flat [ 0.115610] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.215496] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.333790] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.344295] Initializing CPU#1 [ 0.493453] Calibrating delay using timer specific routine.. 5617.34 BogoMIPS (lpj=28086749) [ 0.493458] CPU: Physical Processor ID: 0 [ 0.493459] CPU: Processor Core ID: 1 [ 0.493461] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.493462] CPU: L2 cache: 256K [ 0.493463] CPU: L3 cache: 8192K [ 0.493464] CPU 1/0x2 -> Node 0 [ 0.493467] mce: CPU supports 9 MCE banks [ 0.493474] CPU1: Thermal monitoring enabled (TM1) [ 0.493476] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.494069] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.494683] CPU1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.495330] Skipping synchronization checks as TSC is reliable. [ 0.495434] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.505793] Initializing CPU#2 [ 0.653195] Calibrating delay using timer specific routine.. 5617.35 BogoMIPS (lpj=28086779) [ 0.653201] CPU: Physical Processor ID: 0 [ 0.653202] CPU: Processor Core ID: 2 [ 0.653203] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.653205] CPU: L2 cache: 256K [ 0.653205] CPU: L3 cache: 8192K [ 0.653207] CPU 2/0x4 -> Node 0 [ 0.653209] mce: CPU supports 9 MCE banks [ 0.653216] CPU2: Thermal monitoring enabled (TM1) [ 0.653219] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.653806] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.654378] CPU2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.655025] Skipping synchronization checks as TSC is reliable. [ 0.655130] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.665489] Initializing CPU#3 [ 0.812937] Calibrating delay using timer specific routine.. 5617.35 BogoMIPS (lpj=28086772) [ 0.812943] CPU: Physical Processor ID: 0 [ 0.812944] CPU: Processor Core ID: 3 [ 0.812946] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.812947] CPU: L2 cache: 256K [ 0.812948] CPU: L3 cache: 8192K [ 0.812949] CPU 3/0x6 -> Node 0 [ 0.812951] mce: CPU supports 9 MCE banks [ 0.812958] CPU3: Thermal monitoring enabled (TM1) [ 0.812961] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.813552] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.814175] CPU3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.814822] Skipping synchronization checks as TSC is reliable. [ 0.814932] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.825292] Initializing CPU#4 [ 0.972680] Calibrating delay using timer specific routine.. 5617.35 BogoMIPS (lpj=28086756) [ 0.972687] CPU: Physical Processor ID: 0 [ 0.972688] CPU: Processor Core ID: 0 [ 0.972690] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.972691] CPU: L2 cache: 256K [ 0.972692] CPU: L3 cache: 8192K [ 0.972694] CPU 4/0x1 -> Node 0 [ 0.972697] mce: CPU supports 9 MCE banks [ 0.972705] CPU4: Thermal monitoring enabled (TM1) [ 0.972707] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.973425] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.974173] CPU4: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.974819] Skipping synchronization checks as TSC is reliable. [ 0.974926] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.985185] Initializing CPU#5 [ 1.132422] Calibrating delay using timer specific routine.. 5617.35 BogoMIPS (lpj=28086767) [ 1.132428] CPU: Physical Processor ID: 0 [ 1.132429] CPU: Processor Core ID: 1 [ 1.132430] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.132432] CPU: L2 cache: 256K [ 1.132432] CPU: L3 cache: 8192K [ 1.132434] CPU 5/0x3 -> Node 0 [ 1.132436] mce: CPU supports 9 MCE banks [ 1.132443] CPU5: Thermal monitoring enabled (TM1) [ 1.132445] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 1.133187] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 1.133975] CPU5: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 1.134621] Skipping synchronization checks as TSC is reliable. [ 1.134726] Booting processor 6 APIC 0x5 ip 0x6000 [ 1.145085] Initializing CPU#6 [ 1.292165] Calibrating delay using timer specific routine.. 5617.35 BogoMIPS (lpj=28086752) [ 1.292170] CPU: Physical Processor ID: 0 [ 1.292171] CPU: Processor Core ID: 2 [ 1.292173] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.292174] CPU: L2 cache: 256K [ 1.292175] CPU: L3 cache: 8192K [ 1.292176] CPU 6/0x5 -> Node 0 [ 1.292178] mce: CPU supports 9 MCE banks [ 1.292185] CPU6: Thermal monitoring enabled (TM1) [ 1.292188] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 1.292926] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 1.293771] CPU6: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 1.294418] Skipping synchronization checks as TSC is reliable. [ 1.294525] Booting processor 7 APIC 0x7 ip 0x6000 [ 1.304883] Initializing CPU#7 [ 1.451907] Calibrating delay using timer specific routine.. 5617.35 BogoMIPS (lpj=28086763) [ 1.451913] CPU: Physical Processor ID: 0 [ 1.451913] CPU: Processor Core ID: 3 [ 1.451915] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.451916] CPU: L2 cache: 256K [ 1.451917] CPU: L3 cache: 8192K [ 1.451919] CPU 7/0x7 -> Node 0 [ 1.451920] mce: CPU supports 9 MCE banks [ 1.451928] CPU7: Thermal monitoring enabled (TM1) [ 1.451930] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 1.452675] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 1.453470] CPU7: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 1.454116] Skipping synchronization checks as TSC is reliable. [ 1.454175] Brought up 8 CPUs [ 1.454218] Total of 8 processors activated (44938.37 BogoMIPS). [ 1.454316] CPU0 attaching sched-domain: [ 1.454318] domain 0: span 0,4 level SIBLING [ 1.454319] groups: 0 4 [ 1.454322] domain 1: span 0-7 level MC [ 1.454323] groups: 0,4 1,5 2,6 3,7 [ 1.454327] CPU1 attaching sched-domain: [ 1.454329] domain 0: span 1,5 level SIBLING [ 1.454330] groups: 1 5 [ 1.454332] domain 1: span 0-7 level MC [ 1.454333] groups: 1,5 2,6 3,7 0,4 [ 1.454337] CPU2 attaching sched-domain: [ 1.454338] domain 0: span 2,6 level SIBLING [ 1.454340] groups: 2 6 [ 1.454342] domain 1: span 0-7 level MC [ 1.454343] groups: 2,6 3,7 0,4 1,5 [ 1.454346] CPU3 attaching sched-domain: [ 1.454348] domain 0: span 3,7 level SIBLING [ 1.454349] groups: 3 7 [ 1.454351] domain 1: span 0-7 level MC [ 1.454352] groups: 3,7 0,4 1,5 2,6 [ 1.454356] CPU4 attaching sched-domain: [ 1.454357] domain 0: span 0,4 level SIBLING [ 1.454358] groups: 4 0 [ 1.454360] domain 1: span 0-7 level MC [ 1.454362] groups: 0,4 1,5 2,6 3,7 [ 1.454365] CPU5 attaching sched-domain: [ 1.454366] domain 0: span 1,5 level SIBLING [ 1.454367] groups: 5 1 [ 1.454369] domain 1: span 0-7 level MC [ 1.454371] groups: 1,5 2,6 3,7 0,4 [ 1.454374] CPU6 attaching sched-domain: [ 1.454375] domain 0: span 2,6 level SIBLING [ 1.454377] groups: 6 2 [ 1.454379] domain 1: span 0-7 level MC [ 1.454380] groups: 2,6 3,7 0,4 1,5 [ 1.454383] CPU7 attaching sched-domain: [ 1.454385] domain 0: span 3,7 level SIBLING [ 1.454386] groups: 7 3 [ 1.454388] domain 1: span 0-7 level MC [ 1.454389] groups: 3,7 0,4 1,5 2,6 [ 1.454678] Booting paravirtualized kernel on bare hardware [ 1.454848] regulator: core version 0.5 [ 1.454914] Time: 10:10:23 Date: 04/25/10 [ 1.454986] NET: Registered protocol family 16 [ 1.455105] ACPI: bus type pci registered [ 1.455195] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.455244] PCI: Not using MMCONFIG. [ 1.455288] PCI: Using configuration type 1 for base access [ 1.455882] bio: create slab <bio-0> at 0 [ 1.456715] ACPI: EC: Look up EC in DSDT [ 1.469580] ACPI: Interpreter enabled [ 1.469625] ACPI: (supports S0 S1 S3 S4 S5) [ 1.469815] ACPI: Using IOAPIC for interrupt routing [ 1.469901] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 1.472632] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 1.477189] PCI: Using MMCONFIG at e0000000 - efffffff [ 1.484686] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 1.484735] ACPI: EC: driver started in poll mode [ 1.484847] ACPI Warning: Incorrect checksum in table [OEMB] - 0F, should be 0E 20090521 tbutils-246 [ 1.485096] ACPI: No dock devices found. [ 1.485395] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.485530] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.485580] pci 0000:00:03.0: PME# disabled [ 1.485860] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbafe000-0xfbafe3ff] [ 1.485908] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.485957] pci 0000:00:1a.0: PME# disabled [ 1.486035] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbaf8000-0xfbafbfff] [ 1.486070] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.486120] pci 0000:00:1b.0: PME# disabled [ 1.486212] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.486261] pci 0000:00:1c.0: PME# disabled [ 1.486356] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.486405] pci 0000:00:1c.4: PME# disabled [ 1.486498] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.486548] pci 0000:00:1c.5: PME# disabled [ 1.486640] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 1.486689] pci 0000:00:1c.6: PME# disabled [ 1.486784] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 1.486833] pci 0000:00:1c.7: PME# disabled [ 1.486920] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbafd000-0xfbafd3ff] [ 1.486968] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.487018] pci 0000:00:1d.0: PME# disabled [ 1.487217] pci 0000:00:1f.2: reg 10 io port: [0xa880-0xa887] [ 1.487222] pci 0000:00:1f.2: reg 14 io port: [0xa800-0xa803] [ 1.487227] pci 0000:00:1f.2: reg 18 io port: [0xa480-0xa487] [ 1.487231] pci 0000:00:1f.2: reg 1c io port: [0xa400-0xa403] [ 1.487236] pci 0000:00:1f.2: reg 20 io port: [0xa080-0xa09f] [ 1.487240] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfbaf7000-0xfbaf77ff] [ 1.487267] pci 0000:00:1f.2: PME# supported from D3hot [ 1.487314] pci 0000:00:1f.2: PME# disabled [ 1.487381] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbafc000-0xfbafc0ff] [ 1.487392] pci 0000:00:1f.3: reg 20 io port: [0xffe0-0xffff] [ 1.487432] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 1.487440] pci 0000:01:00.0: reg 18 64bit mmio: [0xfbbe0000-0xfbbeffff] [ 1.487444] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff] [ 1.487451] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbbc0000-0xfbbdffff] [ 1.487467] pci 0000:01:00.0: supports D1 D2 [ 1.487495] pci 0000:01:00.1: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff] [ 1.487525] pci 0000:01:00.1: supports D1 D2 [ 1.487553] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff] [ 1.487556] pci 0000:00:03.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] [ 1.487560] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.487753] pci 0000:03:00.0: reg 24 32bit mmio: [0xfbdfa000-0xfbdfbfff] [ 1.487788] pci 0000:03:00.0: PME# supported from D3hot [ 1.487838] pci 0000:03:00.0: PME# disabled [ 1.487930] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07] [ 1.487938] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883] [ 1.487946] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807] [ 1.487953] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483] [ 1.487961] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f] [ 1.488043] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff] [ 1.488046] pci 0000:00:1c.6: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 1.488091] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff] [ 1.488109] pci 0000:02:00.0: reg 18 64bit mmio: [0xfafff000-0xfaffffff] [ 1.488121] pci 0000:02:00.0: reg 20 64bit mmio: [0xfaff8000-0xfaffbfff] [ 1.488128] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbcf0000-0xfbcfffff] [ 1.488164] pci 0000:02:00.0: supports D1 D2 [ 1.488166] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.488217] pci 0000:02:00.0: PME# disabled [ 1.488312] pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff] [ 1.488315] pci 0000:00:1c.7: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 1.488319] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] [ 1.488354] pci 0000:07:04.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff] [ 1.488360] pci 0000:07:04.0: reg 14 io port: [0xec00-0xec7f] [ 1.488398] pci 0000:07:04.0: supports D2 [ 1.488400] pci 0000:07:04.0: PME# supported from D2 D3hot D3cold [ 1.488449] pci 0000:07:04.0: PME# disabled [ 1.488529] pci 0000:00:1e.0: transparent bridge [ 1.488576] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 1.488579] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 1.488608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.488747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 1.488850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 1.488903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 1.488948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] [ 1.488994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] [ 1.489039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT] [ 1.489094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT] [ 1.506815] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.507256] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 1.507479] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 1.507918] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 1.508357] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 1.508860] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 1.509298] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 1.509736] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 1.510187] SCSI subsystem initialized [ 1.510310] libata version 3.00 loaded. [ 1.510350] usbcore: registered new interface driver usbfs [ 1.510402] usbcore: registered new interface driver hub [ 1.510465] usbcore: registered new device driver usb [ 1.510579] ACPI: WMI: Mapper loaded [ 1.511259] PCI: Using ACPI for IRQ routing [ 1.531794] Bluetooth: Core ver 2.15 [ 1.531867] NET: Registered protocol family 31 [ 1.531912] Bluetooth: HCI device and connection manager initialized [ 1.531960] Bluetooth: HCI socket layer initialized [ 1.532006] NetLabel: Initializing [ 1.532049] NetLabel: domain hash size = 128 [ 1.532093] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.532146] NetLabel: unlabeled traffic allowed by default [ 1.532227] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 1.532515] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.541788] hpet: hpet2 irq 24 for MSI [ 1.542949] hpet: hpet3 irq 25 for MSI [ 1.552923] hpet: hpet4 irq 26 for MSI [ 1.562916] hpet: hpet5 irq 27 for MSI [ 1.563214] hpet: hpet6 irq 28 for MSI [ 1.581758] Switched to high resolution mode on CPU 0 [ 1.582898] Switched to high resolution mode on CPU 2 [ 1.582905] Switched to high resolution mode on CPU 3 [ 1.582911] Switched to high resolution mode on CPU 1 [ 1.583203] Switched to high resolution mode on CPU 4 [ 1.583240] Switched to high resolution mode on CPU 6 [ 1.583248] Switched to high resolution mode on CPU 5 [ 1.583251] Switched to high resolution mode on CPU 7 [ 1.601729] pnp: PnP ACPI init [ 1.601790] ACPI: bus type pnp registered [ 1.604294] pnp: PnP ACPI: found 16 devices [ 1.604340] ACPI: ACPI bus type pnp unregistered [ 1.604391] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 1.604441] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 1.604491] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 1.604540] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 1.604592] system 00:06: ioport range 0x290-0x29f has been reserved [ 1.604643] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 1.604691] system 00:07: ioport range 0x800-0x87f has been reserved [ 1.604739] system 00:07: ioport range 0x500-0x57f has been reserved [ 1.604788] system 00:07: ioport range 0x600-0x607 has been reserved [ 1.604837] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.604886] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.604936] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 1.604987] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 1.605039] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.605100] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.605152] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 1.605204] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 1.605252] system 00:0f: iomem range 0xc0000-0xcffff has been reserved [ 1.605301] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 1.605351] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved [ 1.605412] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved [ 1.610063] AppArmor: AppArmor Filesystem Enabled [ 1.610154] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 1.610202] pci 0000:00:03.0: IO window: 0xb000-0xbfff [ 1.610251] pci 0000:00:03.0: MEM window: 0xfbb00000-0xfbbfffff [ 1.610300] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.610363] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:06 [ 1.610410] pci 0000:00:1c.0: IO window: disabled [ 1.610458] pci 0000:00:1c.0: MEM window: disabled [ 1.610505] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.610553] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05 [ 1.610600] pci 0000:00:1c.4: IO window: disabled [ 1.610648] pci 0000:00:1c.4: MEM window: disabled [ 1.610695] pci 0000:00:1c.4: PREFETCH window: disabled [ 1.610744] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 1.610791] pci 0000:00:1c.5: IO window: disabled [ 1.610838] pci 0000:00:1c.5: MEM window: disabled [ 1.610886] pci 0000:00:1c.5: PREFETCH window: disabled [ 1.610934] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:03 [ 1.610982] pci 0000:00:1c.6: IO window: 0xd000-0xdfff [ 1.611031] pci 0000:00:1c.6: MEM window: 0xfbd00000-0xfbdfffff [ 1.611080] pci 0000:00:1c.6: PREFETCH window: disabled [ 1.611128] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:02 [ 1.611176] pci 0000:00:1c.7: IO window: 0xc000-0xcfff [ 1.611225] pci 0000:00:1c.7: MEM window: 0xfbc00000-0xfbcfffff [ 1.611274] pci 0000:00:1c.7: PREFETCH window: 0x000000faf00000-0x000000faffffff [ 1.611339] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07 [ 1.611387] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 1.611436] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff [ 1.611485] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.611537] alloc irq_desc for 16 on node 0 [ 1.611538] alloc kstat_irqs on node 0 [ 1.611542] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.611592] pci 0000:00:03.0: setting latency timer to 64 [ 1.611597] alloc irq_desc for 17 on node 0 [ 1.611598] alloc kstat_irqs on node 0 [ 1.611601] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.611651] pci 0000:00:1c.0: setting latency timer to 64 [ 1.611656] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.611712] pci 0000:00:1c.4: setting latency timer to 64 [ 1.611717] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.611767] pci 0000:00:1c.5: setting latency timer to 64 [ 1.611772] alloc irq_desc for 18 on node 0 [ 1.611773] alloc kstat_irqs on node 0 [ 1.611776] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.611826] pci 0000:00:1c.6: setting latency timer to 64 [ 1.611831] alloc irq_desc for 19 on node 0 [ 1.611832] alloc kstat_irqs on node 0 [ 1.611834] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.611885] pci 0000:00:1c.7: setting latency timer to 64 [ 1.611889] pci 0000:00:1e.0: setting latency timer to 64 [ 1.611892] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.611894] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.611895] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 1.611897] pci_bus 0000:01: resource 1 mem: [0xfbb00000-0xfbbfffff] [ 1.611899] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 1.611900] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 1.611902] pci_bus 0000:03: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 1.611904] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 1.611905] pci_bus 0000:02: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 1.611907] pci_bus 0000:02: resource 2 pref mem [0xfaf00000-0xfaffffff] [ 1.611908] pci_bus 0000:07: resource 0 io: [0xe000-0xefff] [ 1.611910] pci_bus 0000:07: resource 1 mem: [0xfbe00000-0xfbefffff] [ 1.611911] pci_bus 0000:07: resource 3 io: [0x00-0xffff] [ 1.611913] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.611933] NET: Registered protocol family 2 [ 1.612087] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.612793] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.615031] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.615345] TCP: Hash tables configured (established 524288 bind 65536) [ 1.615394] TCP reno registered [ 1.615502] NET: Registered protocol family 1 [ 1.615584] Trying to unpack rootfs image as initramfs... [ 2.633306] Freeing initrd memory: 66196k freed [ 2.642103] Scanning for low memory corruption every 60 seconds [ 2.642230] audit: initializing netlink socket (disabled) [ 2.642286] type=2000 audit(1272190224.430:1): initialized [ 2.649418] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.650419] VFS: Disk quotas dquot_6.5.2 [ 2.650499] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.650934] fuse init (API version 7.12) [ 2.651029] msgmni has been set to 7911 [ 2.651240] alg: No test for stdrng (krng) [ 2.651291] io scheduler noop registered [ 2.651336] io scheduler anticipatory registered [ 2.651381] io scheduler deadline registered [ 2.651453] io scheduler cfq registered (default) [ 2.689907] pci 0000:01:00.0: Boot video device [ 2.690029] alloc irq_desc for 29 on node 0 [ 2.690031] alloc kstat_irqs on node 0 [ 2.690037] pcieport-driver 0000:00:03.0: irq 29 for MSI/MSI-X [ 2.690042] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 2.690134] alloc irq_desc for 30 on node 0 [ 2.690135] alloc kstat_irqs on node 0 [ 2.690141] pcieport-driver 0000:00:1c.0: irq 30 for MSI/MSI-X [ 2.690147] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.690244] alloc irq_desc for 31 on node 0 [ 2.690245] alloc kstat_irqs on node 0 [ 2.690250] pcieport-driver 0000:00:1c.4: irq 31 for MSI/MSI-X [ 2.690256] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 2.690350] alloc irq_desc for 32 on node 0 [ 2.690352] alloc kstat_irqs on node 0 [ 2.690357] pcieport-driver 0000:00:1c.5: irq 32 for MSI/MSI-X [ 2.690363] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 2.690458] alloc irq_desc for 33 on node 0 [ 2.690460] alloc kstat_irqs on node 0 [ 2.690465] pcieport-driver 0000:00:1c.6: irq 33 for MSI/MSI-X [ 2.690471] pcieport-driver 0000:00:1c.6: setting latency timer to 64 [ 2.690568] alloc irq_desc for 34 on node 0 [ 2.690569] alloc kstat_irqs on node 0 [ 2.690575] pcieport-driver 0000:00:1c.7: irq 34 for MSI/MSI-X [ 2.690581] pcieport-driver 0000:00:1c.7: setting latency timer to 64 [ 2.690645] Firmware did not grant requested _OSC control [ 2.690647] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 2.690653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.690709] Firmware did not grant requested _OSC control [ 2.690720] Firmware did not grant requested _OSC control [ 2.690730] Firmware did not grant requested _OSC control [ 2.690739] Firmware did not grant requested _OSC control [ 2.690748] Firmware did not grant requested _OSC control [ 2.690766] Firmware did not grant requested _OSC control [ 2.690775] Firmware did not grant requested _OSC control [ 2.690784] Firmware did not grant requested _OSC control [ 2.690793] Firmware did not grant requested _OSC control [ 2.690802] Firmware did not grant requested _OSC control [ 2.690811] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.690927] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.690989] ACPI: Power Button [PWRF] [ 2.691067] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.691130] ACPI: Power Button [PWRB] [ 2.692315] ACPI: SSDT 00000000bf788150 0244C (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 2.692857] ACPI: SSDT 00000000bf78a5a0 00659 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 2.693443] Monitor-Mwait will be used to enter C-1 state [ 2.693457] Monitor-Mwait will be used to enter C-2 state [ 2.693469] Monitor-Mwait will be used to enter C-3 state [ 2.693483] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.693648] processor LNXCPU:00: registered as cooling_device0 [ 2.693995] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.694157] processor LNXCPU:01: registered as cooling_device1 [ 2.694512] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 2.694673] processor LNXCPU:02: registered as cooling_device2 [ 2.695018] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 2.695180] processor LNXCPU:03: registered as cooling_device3 [ 2.695530] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3]) [ 2.695692] processor LNXCPU:04: registered as cooling_device4 [ 2.696044] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3]) [ 2.696206] processor LNXCPU:05: registered as cooling_device5 [ 2.696547] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3]) [ 2.696709] processor LNXCPU:06: registered as cooling_device6 [ 2.697050] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) [ 2.697212] processor LNXCPU:07: registered as cooling_device7 [ 2.700147] Linux agpgart interface v0.103 [ 2.700196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.700331] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.700621] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.701247] brd: module loaded [ 2.701545] loop: module loaded [ 2.701630] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.701742] ahci 0000:00:1f.2: version 3.0 [ 2.701751] alloc irq_desc for 21 on node 0 [ 2.701752] alloc kstat_irqs on node 0 [ 2.701756] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 2.701826] alloc irq_desc for 35 on node 0 [ 2.701827] alloc kstat_irqs on node 0 [ 2.701833] ahci 0000:00:1f.2: irq 35 for MSI/MSI-X [ 2.701855] ahci: SSS flag set, parallel bus scan disabled [ 2.719878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.719947] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 2.720011] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.819723] scsi0 : ahci [ 2.819817] scsi1 : ahci [ 2.819888] scsi2 : ahci [ 2.819960] scsi3 : ahci [ 2.820034] scsi4 : ahci [ 2.820104] scsi5 : ahci [ 2.820226] ata1: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port 0xfbaf7100 irq 35 [ 2.820288] ata2: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port 0xfbaf7180 irq 35 [ 2.820349] ata3: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port 0xfbaf7200 irq 35 [ 2.820411] ata4: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port 0xfbaf7280 irq 35 [ 2.820472] ata5: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port 0xfbaf7300 irq 35 [ 2.820534] ata6: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port 0xfbaf7380 irq 35 [ 2.820630] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.839665] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.839736] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio [ 2.839787] ahci 0000:03:00.0: setting latency timer to 64 [ 2.839869] scsi6 : ahci [ 2.839939] scsi7 : ahci [ 2.840024] ata7: SATA max UDMA/133 abar m8192(a)0xfbdfa000 port 0xfbdfa100 irq 18 [ 2.840086] ata8: SATA max UDMA/133 abar m8192(a)0xfbdfa000 port 0xfbdfa180 irq 18 [ 2.840366] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.840443] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 2.840482] scsi8 : pata_jmicron [ 2.840556] scsi9 : pata_jmicron [ 2.840999] ata9: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 [ 2.841049] ata10: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 [ 2.841399] Fixed MDIO Bus: probed [ 2.841461] PPP generic driver version 2.4.2 [ 2.841550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.842257] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.842314] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.842317] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 2.842380] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.846324] ehci_hcd 0000:00:1a.0: debug port 2 [ 2.846372] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 2.846381] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbafe000 [ 2.869587] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.869688] usb usb1: configuration #1 chosen from 1 choice [ 2.869752] hub 1-0:1.0: USB hub found [ 2.869799] hub 1-0:1.0: 2 ports detected [ 2.869886] alloc irq_desc for 23 on node 0 [ 2.869888] alloc kstat_irqs on node 0 [ 2.869892] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.869948] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.869951] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.870014] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.873959] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.874008] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 2.874017] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbafd000 [ 2.889554] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.889646] usb usb2: configuration #1 chosen from 1 choice [ 2.889706] hub 2-0:1.0: USB hub found [ 2.889752] hub 2-0:1.0: 2 ports detected [ 2.889830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.889885] uhci_hcd: USB Universal Host Controller Interface driver [ 2.889988] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.890036] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.890558] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.890642] mice: PS/2 mouse device common for all mice [ 2.890734] rtc_cmos 00:03: RTC can wake from S4 [ 2.890795] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.890864] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.890989] device-mapper: uevent: version 1.0.3 [ 2.891077] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel(a)redhat.com [ 2.891221] device-mapper: multipath: version 1.1.0 loaded [ 2.891268] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.891629] cpuidle: using governor ladder [ 2.891902] cpuidle: using governor menu [ 2.892213] TCP cubic registered [ 2.892336] NET: Registered protocol family 10 [ 2.892676] lo: Disabled Privacy Extensions [ 2.892910] NET: Registered protocol family 17 [ 2.892963] Bluetooth: L2CAP ver 2.13 [ 2.893007] Bluetooth: L2CAP socket layer initialized [ 2.893053] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.893098] Bluetooth: SCO socket layer initialized [ 2.893155] Bluetooth: RFCOMM TTY layer initialized [ 2.893201] Bluetooth: RFCOMM socket layer initialized [ 2.893247] Bluetooth: RFCOMM ver 1.11 [ 2.895830] PM: Resume from disk failed. [ 2.895835] registered taskstats version 1 [ 2.895954] Magic number: 6:541:174 [ 2.896012] acpi device:37: hash matches [ 2.896063] acpi device:0a: hash matches [ 2.896205] rtc_cmos 00:03: setting system clock to 2010-04-25 10:10:25 UTC (1272190225) [ 2.896275] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.896321] EDD information not available. [ 2.910176] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.999819] ata9.01: NODEV after polling detection [ 3.020272] ata9.00: ATAPI: PLEXTOR DVDR PX-740A, 1.02, max UDMA/33 [ 3.063942] ata9.00: configured for UDMA/33 [ 3.189223] ata7: SATA link down (SStatus 0 SControl 300) [ 3.189314] ata8: SATA link down (SStatus 0 SControl 300) [ 3.199196] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 3.348939] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.353763] usb 1-1: configuration #1 chosen from 1 choice [ 3.354099] hub 1-1:1.0: USB hub found [ 3.354271] hub 1-1:1.0: 6 ports detected [ 3.366808] ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 [ 3.366869] ata1.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.368030] ata1.00: configured for UDMA/133 [ 3.391488] scsi 0:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5 [ 3.391719] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.391791] sd 0:0:0:0: [sda] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB) [ 3.391872] sd 0:0:0:0: [sda] Write Protect is off [ 3.391918] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.391932] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.392049] sda: sda1 sda2 sda3 sda4 [ 3.416551] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.468697] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 3.622267] usb 2-1: configuration #1 chosen from 1 choice [ 3.622527] hub 2-1:1.0: USB hub found [ 3.622725] hub 2-1:1.0: 8 ports detected [ 3.698488] usb 1-1.3: new high speed USB device using ehci_hcd and address 3 [ 3.811025] usb 1-1.3: configuration #1 chosen from 1 choice [ 3.898186] usb 2-1.3: new low speed USB device using ehci_hcd and address 3 [ 4.013452] usb 2-1.3: configuration #1 chosen from 1 choice [ 4.087907] usb 2-1.4: new high speed USB device using ehci_hcd and address 4 [ 4.275954] usb 2-1.4: configuration #1 chosen from 1 choice [ 4.317329] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.338405] ata2.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 [ 4.338466] ata2.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.339643] ata2.00: configured for UDMA/133 [ 4.357432] scsi 1:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5 [ 4.357638] usb 2-1.6: new low speed USB device using ehci_hcd and address 5 [ 4.357640] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.357661] sd 1:0:0:0: [sdb] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB) [ 4.357690] sd 1:0:0:0: [sdb] Write Protect is off [ 4.357691] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.357702] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.357770] sdb: sdb1 sdb2 sdb3 sdb4 [ 4.379765] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.475732] usb 2-1.6: configuration #1 chosen from 1 choice [ 5.285674] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5.305917] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 [ 5.305979] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.307132] ata3.00: configured for UDMA/133 [ 5.325721] scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 [ 5.325955] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 5.325964] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.325992] sd 2:0:0:0: [sdc] Write Protect is off [ 5.325993] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.326003] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.326054] sdc: sdc1 [ 5.355506] sd 2:0:0:0: [sdc] Attached SCSI disk [ 5.675046] ata4: SATA link down (SStatus 0 SControl 300) [ 6.044399] ata5: SATA link down (SStatus 0 SControl 300) [ 6.413775] ata6: SATA link down (SStatus 0 SControl 300) [ 6.436201] scsi 8:0:0:0: CD-ROM PLEXTOR DVDR PX-740A 1.02 PQ: 0 ANSI: 5 [ 6.444707] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 6.444757] Uniform CD-ROM driver Revision: 3.20 [ 6.444839] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 6.444858] sr 8:0:0:0: Attached scsi generic sg3 type 5 [ 6.615290] Freeing unused kernel memory: 664k freed [ 6.615414] Write protecting the kernel read-only data: 7476k [ 6.691457] [drm] Initialized drm 1.1.0 20060810 [ 6.698176] Initializing USB Mass Storage driver... [ 6.698329] scsi10 : SCSI emulation for USB Mass Storage devices [ 6.698445] usb-storage: device found at 3 [ 6.698447] usb-storage: waiting for device to settle before scanning [ 6.698467] usbcore: registered new interface driver usb-storage [ 6.698515] USB Mass Storage support registered. [ 6.701141] usbcore: registered new interface driver hiddev [ 6.704958] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4 [ 6.705151] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.3/input0 [ 6.708744] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input5 [ 6.708912] generic-usb 0003:1267:0210.0002: input,hidraw1: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1.6/input0 [ 6.708987] usbcore: registered new interface driver usbhid [ 6.709034] usbhid: v2.6:USB HID core driver [ 6.711805] [drm] radeon default to kernel modesetting DISABLED. [ 6.712260] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.712322] pci 0000:01:00.0: setting latency timer to 64 [ 6.712492] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 6.722249] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.722315] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.722435] r8169 0000:02:00.0: setting latency timer to 64 [ 6.722478] alloc irq_desc for 36 on node 0 [ 6.722480] alloc kstat_irqs on node 0 [ 6.722491] r8169 0000:02:00.0: irq 36 for MSI/MSI-X [ 6.723282] eth0: RTL8168d/8111d at 0xffffc90000668000, e0:cb:4e:1b:b7:84, XID 283000c0 IRQ 36 [ 6.727197] ohci1394 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.795119] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbeff000-fbeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.813895] md: bind<sdb2> [ 6.815124] md: bind<sdb1> [ 6.818032] md: bind<sdb3> [ 6.818474] md: bind<sdb4> [ 6.829803] md: bind<sda2> [ 6.833570] md: raid1 personality registered for level 1 [ 6.833934] raid1: raid set md1 active with 2 out of 2 mirrors [ 6.834024] md1: detected capacity change from 0 to 15002828800 [ 6.834904] md: bind<sda3> [ 6.835312] md1: [ 6.836359] md: bind<sda4> [ 6.836531] raid1: raid set md2 active with 2 out of 2 mirrors [ 6.836587] md2: detected capacity change from 0 to 66599976960 [ 6.837262] md2: [ 6.838253] md: raid0 personality registered for level 0 [ 6.838459] raid0: looking at sda4 [ 6.838506] raid0: comparing sda4(1060096) [ 6.838539] with sda4(1060096) [ 6.838618] raid0: END [ 6.838659] raid0: ==> UNIQUE [ 6.838701] raid0: 1 zones [ 6.838743] raid0: looking at sdb4 [ 6.839419] raid0: comparing sdb4(1060096) [ 6.839452] with sda4(1060096) [ 6.839531] raid0: EQUAL [ 6.839572] raid0: FINAL 1 zones [ 6.839615] raid0: done. [ 6.839656] raid0 : md_size is 2120192 sectors. [ 6.839701] ******* md3 configuration ********* [ 6.839745] zone0=[sda4/sdb4/] [ 6.839865] zone offset=0kb device offset=0kb size=1060096kb [ 6.839912] ********************************** [ 6.839913] [ 6.839999] md3: detected capacity change from 0 to 1085538304 [ 6.840325] unknown partition table [ 6.840780] md3: [ 6.842026] md: bind<sda1> [ 6.842169] unknown partition table [ 6.842266] unknown partition table [ 6.878193] raid1: raid set md0 active with 2 out of 2 mirrors [ 6.878278] md0: detected capacity change from 0 to 197263360 [ 6.879129] md0: unknown partition table [ 8.102238] md: linear personality registered for level -1 [ 8.103766] md: multipath personality registered for level -4 [ 8.107046] xor: automatically using best checksumming function: generic_sse [ 8.153227] generic_sse: 15841.600 MB/sec [ 8.153228] xor: using function: generic_sse (15841.600 MB/sec) [ 8.160148] async_tx: api initialized (async) [ 8.160936] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000c1f807] [ 8.332917] raid6: int64x1 3005 MB/s [ 8.502650] raid6: int64x2 3595 MB/s [ 8.672364] raid6: int64x4 2641 MB/s [ 8.842089] raid6: int64x8 2657 MB/s [ 9.011773] raid6: sse2x1 8390 MB/s [ 9.181500] raid6: sse2x2 9892 MB/s [ 9.351212] raid6: sse2x4 11141 MB/s [ 9.351213] raid6: using algorithm sse2x4 (11141 MB/s) [ 9.353591] md: raid6 personality registered for level 6 [ 9.353593] md: raid5 personality registered for level 5 [ 9.353594] md: raid4 personality registered for level 4 [ 9.357723] md: raid10 personality registered for level 10 [ 9.397848] PM: Starting manual resume from disk [ 9.397850] PM: Resume from partition 9:3 [ 9.397851] PM: Checking hibernation image. [ 9.397971] PM: Resume from disk failed. [ 9.425343] EXT4-fs (md1): barriers enabled [ 9.435384] kjournald2 starting: pid 552, dev md1:8, commit interval 5 seconds [ 9.436592] EXT4-fs (md1): delayed allocation enabled [ 9.436598] EXT4-fs: file extents enabled [ 9.437006] EXT4-fs: mballoc enabled [ 9.437012] EXT4-fs (md1): mounted filesystem with ordered data mode [ 9.998048] type=1505 audit(1272190232.613:2): operation="profile_load" pid=586 name=/usr/share/gdm/guest-session/Xsession [ 10.012342] type=1505 audit(1272190232.625:3): operation="profile_load" pid=587 name=/sbin/dhclient3 [ 10.012687] type=1505 audit(1272190232.625:4): operation="profile_load" pid=587 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.012861] type=1505 audit(1272190232.625:5): operation="profile_load" pid=587 name=/usr/lib/connman/scripts/dhclient-script [ 10.040097] type=1505 audit(1272190232.653:6): operation="profile_load" pid=588 name=/usr/bin/evince [ 10.045203] type=1505 audit(1272190232.653:7): operation="profile_load" pid=588 name=/usr/bin/evince-previewer [ 10.048200] type=1505 audit(1272190232.663:8): operation="profile_load" pid=588 name=/usr/bin/evince-thumbnailer [ 10.077246] type=1505 audit(1272190232.683:9): operation="profile_load" pid=590 name=/usr/lib/cups/backend/cups-pdf [ 10.077627] type=1505 audit(1272190232.693:10): operation="profile_load" pid=590 name=/usr/sbin/cupsd [ 10.099442] type=1505 audit(1272190232.713:11): operation="profile_load" pid=591 name=/usr/sbin/mysqld-akonadi [ 11.685433] usb-storage: device scan complete [ 11.686232] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 11.686970] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 11.687839] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 11.688691] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 11.689426] sd 10:0:0:0: Attached scsi generic sg4 type 0 [ 11.689472] sd 10:0:0:1: Attached scsi generic sg5 type 0 [ 11.689534] sd 10:0:0:2: Attached scsi generic sg6 type 0 [ 11.689581] sd 10:0:0:3: Attached scsi generic sg7 type 0 [ 11.693110] sd 10:0:0:0: [sdd] Attached SCSI removable disk [ 11.693856] sd 10:0:0:1: [sde] Attached SCSI removable disk [ 11.694609] sd 10:0:0:2: [sdf] Attached SCSI removable disk [ 11.695444] sd 10:0:0:3: [sdg] Attached SCSI removable disk [ 28.708824] udev: starting version 147 [ 28.749712] lp: driver loaded but no devices found [ 28.753665] Linux video capture interface: v2.00 [ 28.756607] uvcvideo: Found UVC 1.00 device ViewSonic 1.3M, USB2.0 Webcam (04f2:b021) [ 28.760134] input: ViewSonic 1.3M, USB2.0 Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input6 [ 28.760173] usbcore: registered new interface driver uvcvideo [ 28.760176] USB Video Class driver (v0.1.0) [ 28.761554] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.842274] alloc irq_desc for 22 on node 0 [ 28.842277] alloc kstat_irqs on node 0 [ 28.842283] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 28.842397] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 29.009593] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 29.009623] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 29.022083] Adding 1060088k swap on /dev/md3. Priority:-1 extents:1 across:1060088k [ 29.492939] EXT4-fs (md1): internal journal on md1:8 [ 29.879302] EXT4-fs (md0): barriers enabled [ 29.879608] kjournald2 starting: pid 1214, dev md0:8, commit interval 5 seconds [ 29.895604] EXT4-fs (md0): internal journal on md0:8 [ 29.895610] EXT4-fs (md0): delayed allocation enabled [ 29.895615] EXT4-fs: file extents enabled [ 29.895652] EXT4-fs: mballoc enabled [ 29.895669] EXT4-fs (md0): mounted filesystem with ordered data mode [ 30.575506] EXT4-fs (md2): barriers enabled [ 30.575930] kjournald2 starting: pid 1227, dev md2:8, commit interval 5 seconds [ 30.625268] EXT4-fs (md2): internal journal on md2:8 [ 30.625275] EXT4-fs (md2): delayed allocation enabled [ 30.625279] EXT4-fs: file extents enabled [ 30.625439] EXT4-fs: mballoc enabled [ 30.625447] EXT4-fs (md2): mounted filesystem with ordered data mode [ 30.686188] r8169: eth0: link up [ 30.686192] r8169: eth0: link up [ 30.864001] __ratelimit: 3 callbacks suppressed [ 30.864003] type=1505 audit(1272190253.513:13): operation="profile_replace" pid=1396 name=/usr/share/gdm/guest-session/Xsession [ 30.864982] type=1505 audit(1272190253.513:14): operation="profile_replace" pid=1397 name=/sbin/dhclient3 [ 30.865297] type=1505 audit(1272190253.513:15): operation="profile_replace" pid=1397 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 30.865471] type=1505 audit(1272190253.513:16): operation="profile_replace" pid=1397 name=/usr/lib/connman/scripts/dhclient-script [ 30.867225] type=1505 audit(1272190253.513:17): operation="profile_replace" pid=1398 name=/usr/bin/evince [ 30.872265] type=1505 audit(1272190253.513:18): operation="profile_replace" pid=1398 name=/usr/bin/evince-previewer [ 30.875315] type=1505 audit(1272190253.523:19): operation="profile_replace" pid=1398 name=/usr/bin/evince-thumbnailer [ 30.880076] type=1505 audit(1272190253.523:20): operation="profile_replace" pid=1400 name=/usr/lib/cups/backend/cups-pdf [ 30.880463] type=1505 audit(1272190253.523:21): operation="profile_replace" pid=1400 name=/usr/sbin/cupsd [ 30.881725] type=1505 audit(1272190253.523:22): operation="p
From: Robert Hancock on 25 Apr 2010 13:30 On Sun, Apr 25, 2010 at 10:57 AM, Richard Genoud <richard.genoud(a)gmail.com> wrote: > 2010/4/25 Robert Hancock <hancockrwd(a)gmail.com>: >> Usually this sort of thing is some kind of hardware problem - either a >> firmware bug in the drive, or else a SATA link communication problem like a >> bad cable, or the drives not getting clean power under load. > I'll try other sata cables, but I'm afraid, like you said, that it's a > firmware bug... > >> The log is missing the detail messages indicating what actually happened - >> can you post the output from dmesg instead? > you're right, there's more informations in there : > > [ � �2.701742] ahci 0000:00:1f.2: version 3.0 > [ � �2.701751] � alloc irq_desc for 21 on node 0 > [ � �2.701752] � alloc kstat_irqs on node 0 > [ � �2.701756] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 > [ � �2.701826] � alloc irq_desc for 35 on node 0 > [ � �2.701827] � alloc kstat_irqs on node 0 > [ � �2.701833] ahci 0000:00:1f.2: irq 35 for MSI/MSI-X > [ � �2.701855] ahci: SSS flag set, parallel bus scan disabled > [ � �2.719878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 > Gbps 0x3f impl SATA mode > [ � �2.719947] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led > clo pmp pio slum part ems > [ � �2.720011] ahci 0000:00:1f.2: setting latency timer to 64 > [ � �2.819723] scsi0 : ahci > [ � �2.819817] scsi1 : ahci > [ � �2.819888] scsi2 : ahci > [ � �2.819960] scsi3 : ahci > [ � �2.820034] scsi4 : ahci > [ � �2.820104] scsi5 : ahci > [ � �2.820226] ata1: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port > 0xfbaf7100 irq 35 > [ � �2.820288] ata2: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port > 0xfbaf7180 irq 35 > [ � �2.820349] ata3: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port > 0xfbaf7200 irq 35 > [ � �2.820411] ata4: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port > 0xfbaf7280 irq 35 > [ � �2.820472] ata5: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port > 0xfbaf7300 irq 35 > [ � �2.820534] ata6: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port > 0xfbaf7380 irq 35 > [ � �2.820630] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > [ � �2.839665] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 > Gbps 0x3 impl SATA mode > [ � �2.839736] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio > [ � �2.839787] ahci 0000:03:00.0: setting latency timer to 64 > [ � �2.839869] scsi6 : ahci > [ � �2.839939] scsi7 : ahci > [ � �2.840024] ata7: SATA max UDMA/133 abar m8192(a)0xfbdfa000 port > 0xfbdfa100 irq 18 > [ � �2.840086] ata8: SATA max UDMA/133 abar m8192(a)0xfbdfa000 port > 0xfbdfa180 irq 18 > [ � �3.348939] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ � �3.366808] ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 > [ � �3.366869] ata1.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ � �3.368030] ata1.00: configured for UDMA/133 > [ � �4.317329] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ � �4.338405] ata2.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 > [ � �4.338466] ata2.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ � �4.339643] ata2.00: configured for UDMA/133 > [ � �5.285674] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ � �5.305917] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 > [ � �5.305979] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) > [ � �5.307132] ata3.00: configured for UDMA/133 > [ � �5.675046] ata4: SATA link down (SStatus 0 SControl 300) > [ � �6.044399] ata5: SATA link down (SStatus 0 SControl 300) > [ � �6.413775] ata6: SATA link down (SStatus 0 SControl 300) ... > [16840.450530] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen > [16840.450535] ata1.00: cmd 61/b8:00:20:d5:8b/02:00:05:00:00/40 tag 0 > ncq 356352 out > [16840.450536] � � � � �res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask > 0x4 (timeout) > [16840.450538] ata1.00: status: { DRDY } > [16840.450541] ata1.00: cmd 61/80:08:99:bd:86/01:00:09:00:00/40 tag 1 > ncq 196608 out > [16840.450542] � � � � �res 40/00:00:00:00:00/00:00:00:00:00/00 Emask > 0x4 (timeout) > [16840.450543] ata1.00: status: { DRDY } > [16840.450546] ata1: hard resetting link > [16840.978820] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [16840.981055] ata1.00: configured for UDMA/133 > [16840.981064] ata1.00: device reported invalid CHS sector 0 > [16840.981069] ata1.00: device reported invalid CHS sector 0 > [16840.981078] ata1: EH complete Looks like it's only happening on one of the drives, I'd suspect there's some kind of drive fault or power problem specific to that one.. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Richard Genoud on 25 Apr 2010 13:50
2010/4/25 Robert Hancock <hancockrwd(a)gmail.com>: > On Sun, Apr 25, 2010 at 10:57 AM, Richard Genoud > <richard.genoud(a)gmail.com> wrote: >> 2010/4/25 Robert Hancock <hancockrwd(a)gmail.com>: >>> Usually this sort of thing is some kind of hardware problem - either a >>> firmware bug in the drive, or else a SATA link communication problem like a >>> bad cable, or the drives not getting clean power under load. >> I'll try other sata cables, but I'm afraid, like you said, that it's a >> firmware bug... >> >>> The log is missing the detail messages indicating what actually happened - >>> can you post the output from dmesg instead? >> you're right, there's more informations in there : >> >> [ 2.701742] ahci 0000:00:1f.2: version 3.0 >> [ 2.701751] alloc irq_desc for 21 on node 0 >> [ 2.701752] alloc kstat_irqs on node 0 >> [ 2.701756] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 >> [ 2.701826] alloc irq_desc for 35 on node 0 >> [ 2.701827] alloc kstat_irqs on node 0 >> [ 2.701833] ahci 0000:00:1f.2: irq 35 for MSI/MSI-X >> [ 2.701855] ahci: SSS flag set, parallel bus scan disabled >> [ 2.719878] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 >> Gbps 0x3f impl SATA mode >> [ 2.719947] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led >> clo pmp pio slum part ems >> [ 2.720011] ahci 0000:00:1f.2: setting latency timer to 64 >> [ 2.819723] scsi0 : ahci >> [ 2.819817] scsi1 : ahci >> [ 2.819888] scsi2 : ahci >> [ 2.819960] scsi3 : ahci >> [ 2.820034] scsi4 : ahci >> [ 2.820104] scsi5 : ahci >> [ 2.820226] ata1: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port >> 0xfbaf7100 irq 35 >> [ 2.820288] ata2: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port >> 0xfbaf7180 irq 35 >> [ 2.820349] ata3: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port >> 0xfbaf7200 irq 35 >> [ 2.820411] ata4: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port >> 0xfbaf7280 irq 35 >> [ 2.820472] ata5: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port >> 0xfbaf7300 irq 35 >> [ 2.820534] ata6: SATA max UDMA/133 abar m2048(a)0xfbaf7000 port >> 0xfbaf7380 irq 35 >> [ 2.820630] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 >> [ 2.839665] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 >> Gbps 0x3 impl SATA mode >> [ 2.839736] ahci 0000:03:00.0: flags: 64bit ncq led clo pmp pio >> [ 2.839787] ahci 0000:03:00.0: setting latency timer to 64 >> [ 2.839869] scsi6 : ahci >> [ 2.839939] scsi7 : ahci >> [ 2.840024] ata7: SATA max UDMA/133 abar m8192(a)0xfbdfa000 port >> 0xfbdfa100 irq 18 >> [ 2.840086] ata8: SATA max UDMA/133 abar m8192(a)0xfbdfa000 port >> 0xfbdfa180 irq 18 >> [ 3.348939] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 3.366808] ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 >> [ 3.366869] ata1.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32) >> [ 3.368030] ata1.00: configured for UDMA/133 >> [ 4.317329] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 4.338405] ata2.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133 >> [ 4.338466] ata2.00: 160836480 sectors, multi 0: LBA48 NCQ (depth 31/32) >> [ 4.339643] ata2.00: configured for UDMA/133 >> [ 5.285674] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 5.305917] ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 >> [ 5.305979] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) >> [ 5.307132] ata3.00: configured for UDMA/133 >> [ 5.675046] ata4: SATA link down (SStatus 0 SControl 300) >> [ 6.044399] ata5: SATA link down (SStatus 0 SControl 300) >> [ 6.413775] ata6: SATA link down (SStatus 0 SControl 300) > .. > >> [16840.450530] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen >> [16840.450535] ata1.00: cmd 61/b8:00:20:d5:8b/02:00:05:00:00/40 tag 0 >> ncq 356352 out >> [16840.450536] res 40/00:00:00:4f:c2/00:01:00:00:00/00 Emask >> 0x4 (timeout) >> [16840.450538] ata1.00: status: { DRDY } >> [16840.450541] ata1.00: cmd 61/80:08:99:bd:86/01:00:09:00:00/40 tag 1 >> ncq 196608 out >> [16840.450542] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask >> 0x4 (timeout) >> [16840.450543] ata1.00: status: { DRDY } >> [16840.450546] ata1: hard resetting link >> [16840.978820] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [16840.981055] ata1.00: configured for UDMA/133 >> [16840.981064] ata1.00: device reported invalid CHS sector 0 >> [16840.981069] ata1.00: device reported invalid CHS sector 0 >> [16840.981078] ata1: EH complete > > Looks like it's only happening on one of the drives, I'd suspect > there's some kind of drive fault or power problem specific to that > one.. > Actually, it's always happening only on one drive, but it's not always the same: on one boot it's ata1 and in the next boot, it can be ata2. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |