kexec boot regression
in [Kernel]
|
Prev: [mmotm][PATCH 4/5] mm : add lowmem detection logic
Next: move eject code from zd1211rw to usb-storage
From: Yinghai Lu on 15 Dec 2009 14:10 Jens Axboe wrote: > On Tue, Dec 15 2009, Yinghai Lu wrote: >> [ 13.018720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) >> >> [ 13.100724] [Firmware Bug]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources > > On a "normal" non-kexec boot, I get: > > [ 12.173583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) > [ 12.184075] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 > [ 12.216874] PCI: Using configuration type 1 for base access > can you run following scripts in first kernel? cd /sys/firmware/memmap for dir in * ; do start=$(cat $dir/start) end=$(cat $dir/end) type=$(cat $dir/type) printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" >> /tmp/memmap.txt done and send out /tmp/memmap.txt what is your kexec tools version? could be too old? YH -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Jens Axboe on 15 Dec 2009 14:20 On Tue, Dec 15 2009, Yinghai Lu wrote: > Jens Axboe wrote: > > On Tue, Dec 15 2009, Yinghai Lu wrote: > >> [ 13.018720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) > >> > >> [ 13.100724] [Firmware Bug]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources > > > > On a "normal" non-kexec boot, I get: > > > > [ 12.173583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) > > [ 12.184075] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 > > [ 12.216874] PCI: Using configuration type 1 for base access > > > > can you run following scripts in first kernel? > > cd /sys/firmware/memmap > for dir in * ; do > start=$(cat $dir/start) > end=$(cat $dir/end) > type=$(cat $dir/type) > printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" >> /tmp/memmap.txt > done > > and send out /tmp/memmap.txt Below. > what is your kexec tools version? could be too old? It says: kexec-tools-testing 20080324 released 24th March 2008 0000000000000000-0000000000098800 (System RAM) 0000000000098800-00000000000a0000 (reserved) 0000000079301000-0000000079303000 (reserved) 0000000079303000-0000000079305000 (ACPI Tables) 0000000079305000-0000000079310000 (reserved) 0000000079310000-0000000079314000 (ACPI Tables) 0000000079314000-0000000079319000 (reserved) 0000000079319000-0000000079336000 (ACPI Tables) 0000000079336000-0000000079358000 (reserved) 0000000079358000-0000000079388000 (ACPI Tables) 0000000079388000-00000000793c9000 (reserved) 00000000793c9000-000000007968f000 (ACPI Tables) 00000000000e0000-0000000000100000 (reserved) 000000007968f000-00000000796bb000 (reserved) 00000000796bb000-00000000799d8000 (ACPI Tables) 00000000799d8000-0000000079bd8000 (ACPI Non-volatile Storage) 0000000079bd8000-0000000079d8b000 (ACPI Tables) 0000000079d8b000-0000000079d8c000 (reserved) 0000000079d8c000-0000000079dc8000 (ACPI Tables) 0000000079dc8000-0000000079dcb000 (reserved) 0000000079dcb000-0000000079e1c000 (ACPI Tables) 0000000079e1c000-0000000079e87000 (reserved) 0000000079e87000-000000007bd5f000 (ACPI Tables) 0000000000100000-0000000078c59000 (System RAM) 000000007bd5f000-000000007be4f000 (reserved) 000000007be4f000-000000007bf87000 (ACPI Tables) 000000007bf87000-000000007bfcf000 (ACPI Non-volatile Storage) 000000007bfcf000-000000007bfff000 (ACPI Tables) 000000007bfff000-0000000090000000 (reserved) 00000000fc000000-00000000fd000000 (reserved) 00000000fed1c000-00000000fed20000 (reserved) 00000000ff000000-0000000100000000 (reserved) 0000000100000000-0000001080000000 (System RAM) 0000000078c59000-0000000078e6d000 (ACPI Non-volatile Storage) 0000000078e6d000-000000007924e000 (ACPI Tables) 000000007924e000-00000000792c2000 (reserved) 00000000792c2000-00000000792d2000 (ACPI Tables) 00000000792d2000-00000000792e7000 (reserved) 00000000792e7000-0000000079301000 (ACPI Tables) -- Jens Axboe -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Yinghai Lu on 15 Dec 2009 14:20 Jens Axboe wrote: > On Tue, Dec 15 2009, Yinghai Lu wrote: >> Jens Axboe wrote: >>> On Tue, Dec 15 2009, Yinghai Lu wrote: >>>> [ 13.018720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) >>>> >>>> [ 13.100724] [Firmware Bug]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources >>> On a "normal" non-kexec boot, I get: >>> >>> [ 12.173583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) >>> [ 12.184075] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 >>> [ 12.216874] PCI: Using configuration type 1 for base access >>> >> can you run following scripts in first kernel? >> >> cd /sys/firmware/memmap >> for dir in * ; do >> start=$(cat $dir/start) >> end=$(cat $dir/end) >> type=$(cat $dir/type) >> printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" >> /tmp/memmap.txt >> done >> >> and send out /tmp/memmap.txt > > Below. > >> what is your kexec tools version? could be too old? > > It says: > > kexec-tools-testing 20080324 released 24th March 2008 > > > 0000000000000000-0000000000098800 (System RAM) > 0000000000098800-00000000000a0000 (reserved) > 0000000079301000-0000000079303000 (reserved) > 0000000079303000-0000000079305000 (ACPI Tables) > 0000000079305000-0000000079310000 (reserved) > 0000000079310000-0000000079314000 (ACPI Tables) > 0000000079314000-0000000079319000 (reserved) > 0000000079319000-0000000079336000 (ACPI Tables) > 0000000079336000-0000000079358000 (reserved) > 0000000079358000-0000000079388000 (ACPI Tables) > 0000000079388000-00000000793c9000 (reserved) > 00000000793c9000-000000007968f000 (ACPI Tables) > 00000000000e0000-0000000000100000 (reserved) > 000000007968f000-00000000796bb000 (reserved) > 00000000796bb000-00000000799d8000 (ACPI Tables) > 00000000799d8000-0000000079bd8000 (ACPI Non-volatile Storage) > 0000000079bd8000-0000000079d8b000 (ACPI Tables) > 0000000079d8b000-0000000079d8c000 (reserved) > 0000000079d8c000-0000000079dc8000 (ACPI Tables) > 0000000079dc8000-0000000079dcb000 (reserved) > 0000000079dcb000-0000000079e1c000 (ACPI Tables) > 0000000079e1c000-0000000079e87000 (reserved) > 0000000079e87000-000000007bd5f000 (ACPI Tables) > 0000000000100000-0000000078c59000 (System RAM) > 000000007bd5f000-000000007be4f000 (reserved) > 000000007be4f000-000000007bf87000 (ACPI Tables) > 000000007bf87000-000000007bfcf000 (ACPI Non-volatile Storage) > 000000007bfcf000-000000007bfff000 (ACPI Tables) > 000000007bfff000-0000000090000000 (reserved) > 00000000fc000000-00000000fd000000 (reserved) > 00000000fed1c000-00000000fed20000 (reserved) > 00000000ff000000-0000000100000000 (reserved) > 0000000100000000-0000001080000000 (System RAM) > 0000000078c59000-0000000078e6d000 (ACPI Non-volatile Storage) > 0000000078e6d000-000000007924e000 (ACPI Tables) > 000000007924e000-00000000792c2000 (reserved) > 00000000792c2000-00000000792d2000 (ACPI Tables) > 00000000792d2000-00000000792e7000 (reserved) > 00000000792e7000-0000000079301000 (ACPI Tables) > boot log of first kernel? YH -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Jens Axboe on 15 Dec 2009 14:30 On Tue, Dec 15 2009, Yinghai Lu wrote: > Jens Axboe wrote: > > On Tue, Dec 15 2009, Yinghai Lu wrote: > >> Jens Axboe wrote: > >>> On Tue, Dec 15 2009, Yinghai Lu wrote: > >>>> [ 13.018720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) > >>>> > >>>> [ 13.100724] [Firmware Bug]: PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] not reserved in ACPI motherboard resources > >>> On a "normal" non-kexec boot, I get: > >>> > >>> [ 12.173583] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) > >>> [ 12.184075] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 > >>> [ 12.216874] PCI: Using configuration type 1 for base access > >>> > >> can you run following scripts in first kernel? > >> > >> cd /sys/firmware/memmap > >> for dir in * ; do > >> start=$(cat $dir/start) > >> end=$(cat $dir/end) > >> type=$(cat $dir/type) > >> printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type" >> /tmp/memmap.txt > >> done > >> > >> and send out /tmp/memmap.txt > > > > Below. > > > >> what is your kexec tools version? could be too old? > > > > It says: > > > > kexec-tools-testing 20080324 released 24th March 2008 > > > > > > 0000000000000000-0000000000098800 (System RAM) > > 0000000000098800-00000000000a0000 (reserved) > > 0000000079301000-0000000079303000 (reserved) > > 0000000079303000-0000000079305000 (ACPI Tables) > > 0000000079305000-0000000079310000 (reserved) > > 0000000079310000-0000000079314000 (ACPI Tables) > > 0000000079314000-0000000079319000 (reserved) > > 0000000079319000-0000000079336000 (ACPI Tables) > > 0000000079336000-0000000079358000 (reserved) > > 0000000079358000-0000000079388000 (ACPI Tables) > > 0000000079388000-00000000793c9000 (reserved) > > 00000000793c9000-000000007968f000 (ACPI Tables) > > 00000000000e0000-0000000000100000 (reserved) > > 000000007968f000-00000000796bb000 (reserved) > > 00000000796bb000-00000000799d8000 (ACPI Tables) > > 00000000799d8000-0000000079bd8000 (ACPI Non-volatile Storage) > > 0000000079bd8000-0000000079d8b000 (ACPI Tables) > > 0000000079d8b000-0000000079d8c000 (reserved) > > 0000000079d8c000-0000000079dc8000 (ACPI Tables) > > 0000000079dc8000-0000000079dcb000 (reserved) > > 0000000079dcb000-0000000079e1c000 (ACPI Tables) > > 0000000079e1c000-0000000079e87000 (reserved) > > 0000000079e87000-000000007bd5f000 (ACPI Tables) > > 0000000000100000-0000000078c59000 (System RAM) > > 000000007bd5f000-000000007be4f000 (reserved) > > 000000007be4f000-000000007bf87000 (ACPI Tables) > > 000000007bf87000-000000007bfcf000 (ACPI Non-volatile Storage) > > 000000007bfcf000-000000007bfff000 (ACPI Tables) > > 000000007bfff000-0000000090000000 (reserved) > > 00000000fc000000-00000000fd000000 (reserved) > > 00000000fed1c000-00000000fed20000 (reserved) > > 00000000ff000000-0000000100000000 (reserved) > > 0000000100000000-0000001080000000 (System RAM) > > 0000000078c59000-0000000078e6d000 (ACPI Non-volatile Storage) > > 0000000078e6d000-000000007924e000 (ACPI Tables) > > 000000007924e000-00000000792c2000 (reserved) > > 00000000792c2000-00000000792d2000 (ACPI Tables) > > 00000000792d2000-00000000792e7000 (reserved) > > 00000000792e7000-0000000079301000 (ACPI Tables) > > > > boot log of first kernel? Hmm not completely sure, let me re-do it after a cold boot. BTW, I just checked, and 2.6.32 has NUMA working fine. Below is the SRAT and NUMA output from 2.6.32 (kexec'ed kernel). Is the check a newly introduced one? [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 64 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 32 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 96 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 66 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 34 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 98 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 68 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 36 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 100 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 70 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 38 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 102 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 16 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 80 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 48 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 112 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 18 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 82 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 50 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 114 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 20 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 84 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 52 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 116 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 22 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 86 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 54 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 118 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 65 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 33 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 97 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 67 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 35 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 99 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 5 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 69 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 37 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 101 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 71 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 39 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 103 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 17 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 81 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 49 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 113 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 19 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 83 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 51 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 115 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 21 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 85 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 53 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 117 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 23 -> Node 0 [ 0.000000] SRAT: PXM 2 -> APIC 87 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 55 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 119 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-480000000 [ 0.000000] SRAT: Node 2 PXM 1 480000000-880000000 [ 0.000000] SRAT: Node 1 PXM 2 880000000-c80000000 [ 0.000000] SRAT: Node 3 PXM 3 c80000000-1080000000 [ 0.000000] NUMA: Using 31 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000480000000 [ 0.000000] NODE_DATA [0000000000048000 - 000000000004cfff] [ 0.000000] bootmap [0000000000100000 - 000000000018ffff] pages 90 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0480000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000200f260] TEXT DATA BSS ==> [0001000000 - 000200f260] [ 0.000000] #3 [0000098800 - 0000100000] BIOS reserved ==> [0000098800 - 0000100000] [ 0.000000] #4 [0002010000 - 000201035c] BRK ==> [0002010000 - 000201035c] [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #6 [000000a000 - 0000048000] PGTABLE ==> [000000a000 - 0000048000] [ 0.000000] #7 [0000001000 - 000000103c] ACPI SLIT ==> [0000001000 - 000000103c] [ 0.000000] Bootmem setup node 1 0000000880000000-0000000c80000000 [ 0.000000] NODE_DATA [0000000880000000 - 0000000880004fff] [ 0.000000] bootmap [0000000880005000 - 0000000880084fff] pages 80 [ 0.000000] (8 early reservations) ==> bootmem [0880000000 - 0c80000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 000200f260] TEXT DATA BSS [ 0.000000] #3 [0000098800 - 0000100000] BIOS reserved [ 0.000000] #4 [0002010000 - 000201035c] BRK [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE [ 0.000000] #6 [000000a000 - 0000048000] PGTABLE [ 0.000000] #7 [0000001000 - 000000103c] ACPI SLIT [ 0.000000] Bootmem setup node 2 0000000480000000-0000000880000000 [ 0.000000] NODE_DATA [0000000480000000 - 0000000480004fff] [ 0.000000] bootmap [0000000480005000 - 0000000480084fff] pages 80 [ 0.000000] (8 early reservations) ==> bootmem [0480000000 - 0880000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 000200f260] TEXT DATA BSS [ 0.000000] #3 [0000098800 - 0000100000] BIOS reserved [ 0.000000] #4 [0002010000 - 000201035c] BRK [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE [ 0.000000] #6 [000000a000 - 0000048000] PGTABLE [ 0.000000] #7 [0000001000 - 000000103c] ACPI SLIT [ 0.000000] Bootmem setup node 3 0000000c80000000-0000001080000000 [ 0.000000] NODE_DATA [0000000c80000000 - 0000000c80004fff] [ 0.000000] bootmap [0000000c80005000 - 0000000c80084fff] pages 80 [ 0.000000] (8 early reservations) ==> bootmem [0c80000000 - 1080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 000200f260] TEXT DATA BSS [ 0.000000] #3 [0000098800 - 0000100000] BIOS reserved [ 0.000000] #4 [0002010000 - 000201035c] BRK [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE [ 0.000000] #6 [000000a000 - 0000048000] PGTABLE [ 0.000000] #7 [0000001000 - 000000103c] ACPI SLIT [ 0.000000] found SMP MP-table at [ffff8800000fddb0] fddb0 [ 0.000000] [ffffea0000000000-ffffea001d3fffff] PMD -> [ffff880028600000-ffff8800425fffff] on node 0 [ 0.000000] [ffffea001d400000-ffffea00373fffff] PMD -> [ffff880480200000-ffff88049a1fffff] on node 2 [ 0.000000] [ffffea0037400000-ffffea003fffffff] PMD -> [ffff880880200000-ffff880888dfffff] on node 1 [ 0.000000] [ffffea0040000000-ffffea00513fffff] PMD -> [ffff880889000000-ffff88089a3fffff] on node 1 [ 0.000000] [ffffea0051400000-ffffea006b3fffff] PMD -> [ffff880c80200000-ffff880c9a1fffff] on node 3 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x01080000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000098 [ 0.000000] 0: 0x00000100 -> 0x00078c59 [ 0.000000] 0: 0x00100000 -> 0x00480000 [ 0.000000] 2: 0x00480000 -> 0x00880000 [ 0.000000] 1: 0x00880000 -> 0x00c80000 [ 0.000000] 3: 0x00c80000 -> 0x01080000 [ 0.000000] On node 0 totalpages: 4164592 [ 0.000000] DMA zone: 104 pages used for memmap [ 0.000000] DMA zone: 185 pages reserved [ 0.000000] DMA zone: 3702 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 26520 pages used for memmap [ 0.000000] DMA32 zone: 464065 pages, LIFO batch:31 [ 0.000000] Normal zone: 93184 pages used for memmap [ 0.000000] Normal zone: 3576832 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 4194304 [ 0.000000] Normal zone: 106496 pages used for memmap [ 0.000000] Normal zone: 4087808 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 4194304 [ 0.000000] Normal zone: 106496 pages used for memmap [ 0.000000] Normal zone: 4087808 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 4194304 [ 0.000000] Normal zone: 106496 pages used for memmap [ 0.000000] Normal zone: 4087808 pages, LIFO batch:31 -- Jens Axboe -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Jens Axboe on 15 Dec 2009 14:40
On Tue, Dec 15 2009, Jens Axboe wrote: > > boot log of first kernel? > > Hmm not completely sure, let me re-do it after a cold boot. This is from a cold boot of 2.6.32. 0000000000000000-0000000000098800 (System RAM) 0000000000098800-00000000000a0000 (reserved) 0000000079301000-0000000079303000 (reserved) 0000000079303000-0000000079305000 (ACPI Tables) 0000000079305000-0000000079310000 (reserved) 0000000079310000-0000000079314000 (ACPI Tables) 0000000079314000-0000000079319000 (reserved) 0000000079319000-0000000079336000 (ACPI Tables) 0000000079336000-0000000079358000 (reserved) 0000000079358000-0000000079388000 (ACPI Tables) 0000000079388000-00000000793c9000 (reserved) 00000000793c9000-000000007968f000 (ACPI Tables) 00000000000e0000-0000000000100000 (reserved) 000000007968f000-00000000796bb000 (reserved) 00000000796bb000-00000000799d8000 (ACPI Tables) 00000000799d8000-0000000079bd8000 (ACPI Non-volatile Storage) 0000000079bd8000-0000000079d87000 (ACPI Tables) 0000000079d87000-0000000079d8a000 (reserved) 0000000079d8a000-0000000079dca000 (ACPI Tables) 0000000079dca000-0000000079dcb000 (reserved) 0000000079dcb000-0000000079e1c000 (ACPI Tables) 0000000079e1c000-0000000079e87000 (reserved) 0000000079e87000-000000007bd5f000 (ACPI Tables) 0000000000100000-0000000078c63000 (System RAM) 000000007bd5f000-000000007be4f000 (reserved) 000000007be4f000-000000007bf87000 (ACPI Tables) 000000007bf87000-000000007bfcf000 (ACPI Non-volatile Storage) 000000007bfcf000-000000007bfff000 (ACPI Tables) 000000007bfff000-0000000090000000 (reserved) 00000000fc000000-00000000fd000000 (reserved) 00000000fed1c000-00000000fed20000 (reserved) 00000000ff000000-0000000100000000 (reserved) 0000000100000000-0000001080000000 (System RAM) 0000000078c63000-0000000078e77000 (ACPI Non-volatile Storage) 0000000078e77000-000000007924e000 (ACPI Tables) 000000007924e000-00000000792c2000 (reserved) 00000000792c2000-00000000792d2000 (ACPI Tables) 00000000792d2000-00000000792e7000 (reserved) 00000000792e7000-0000000079301000 (ACPI Tables) -- Jens Axboe -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ |