out of disk space error installing fedora: linux allowcddma not ?helpful
in [RedHat]
|
Prev: DHCP on wlan0 int (Wireless Dongle)
Next: out of disk space error installing fedora: linux allowcddma not?helpful
From: The Derfer on 24 Apr 2010 17:17 On Mar 12, 6:24 pm, "David W. Hodgins" <dwhodg...(a)nomail.afraid.org> wrote: > On Fri, 12 Mar 2010 16:49:57 -0500, The Derfer <derf...(a)gmail.com> wrote: > > Thanks but none of those suggestions help. > > I'm already using the custom partition layout. > > It always comes up with that same error. > > As before, a SCSI disk on an Adaptec controller with an > > IDE CDROM connected to the onboard IDE controller. > > What could be wrong with that? > > Can you post the output of "fdisk -l"? > > Regards, Dave Hodgins fdisk -l yields: /dev/sda: 9105 MB, 9105018880 bytes 255 heads, 63 sectrors/track, 1106 cylinders Units=cylinders of 16065 * 512 = 8225280 bytes disk identifier: 0x000b1319 Device Boot Start End Blocks Id System /dev/sda1 * 1 14 107520 83 Linux Partition 1 does not end on cylinder boundary /dev/sda2 14 976 7727104 83 Linux Partition 2 does not end of cylinder boundary /dev/sda3 976 1106 1048576 82 Linux swap/Solaris /dev/sda1 *
From: unruh on 24 Apr 2010 17:29 ["Followup-To:" header set to comp.os.linux.misc.] On 2010-04-24, The Derfer <derf109(a)gmail.com> wrote: > On Mar 12, 6:24?pm, "David W. Hodgins" <dwhodg...(a)nomail.afraid.org> > wrote: >> On Fri, 12 Mar 2010 16:49:57 -0500, The Derfer <derf...(a)gmail.com> wrote: >> > Thanks but none of those suggestions help. >> > I'm already using the custom partition layout. >> > It always comes up with that same error. >> > As before, a SCSI disk on an Adaptec controller with an >> > IDE CDROM connected to the onboard IDE controller. >> > What could be wrong with that? >> >> Can you post the output of "fdisk -l"? >> >> Regards, Dave Hodgins > > > fdisk -l yields: > > /dev/sda: 9105 MB, 9105018880 bytes That is pretty small these days. > 255 heads, 63 sectrors/track, 1106 cylinders > Units=cylinders of 16065 * 512 = 8225280 bytes > disk identifier: 0x000b1319 > Device Boot Start End Blocks > Id System > /dev/sda1 * 1 14 107520 83 Linux That is really tiny. What are you trying to put in there? Ie how are your partitions mounted? 1G is definitely too small if it includes /usr, and even too small if it does not. > Partition 1 does not end on cylinder boundary > /dev/sda2 14 976 7727104 83 Linux How is /dev/sda2 mounted? If it is not /usr, or / then you are screwed. A modern distro needs 6GB min to install in / including /usr, /var,.... What does /etc/fstab say? > Partition 2 does not end of cylinder boundary > /dev/sda3 976 1106 1048576 82 > Linux swap/Solaris > > > > > /dev/sda1 *
From: The Derfer on 24 Apr 2010 21:49 On Apr 24, 6:24 pm, "David W. Hodgins" <dwhodg...(a)nomail.afraid.org> wrote: > On Sat, 24 Apr 2010 18:18:02 -0400, David W. Hodgins <dwhodg...(a)nomail.afraid.org> wrote: > > > > > On Sat, 24 Apr 2010 17:17:21 -0400, The Derfer <derf...(a)gmail.com> wrote: > > >> fdisk -l yields: > >> /dev/sda: 9105 MB, 9105018880 bytes > >> 255 heads, 63 sectrors/track, 1106 cylinders > >> Units=cylinders of 16065 * 512 = 8225280 bytes > >> disk identifier: 0x000b1319 > >> Device Boot Start End Blocks > >> Id System > >> /dev/sda1 * 1 14 107520 > >> 83 Linux > > > So sda1 is 53,760KiB, which is 52.5 Mib. > > >> Partition 1 does not end on cylinder boundary > >> /dev/sda2 14 976 7727104 > >> 83 Linux > > > And sda2 is 3,863,552KiB, which is 3,773 Mib, or 3.68 Gib. > > >> Partition 2 does not end of cylinder boundary > >> /dev/sda3 976 1106 1048576 82 > >> Linux swap/Solaris > > > sda3, is 524,288 KiB, which is 512 Mib. > > > Out of the 9105 MB available, only 4,337.5 has been allocated. > > My guess is that during custom partitioning, the value for sda1 > > was specified in the wrong units, resulting in a much too small > > partition. > > Arrgh. Sorry, I'm used to using sfdisk -l -uS, which shows sectors, > instead of 1KB blocks. All of the allocated spaces are twice what > I posted above, but the point that sda1 is far too small for / still > applies. > > >http://docs.fedoraproject.org/installation-quick-start-guide/f12/en-U... > > specifies a minimum of 10GB, which you are slightly short of. > > > I'd try the install again, specifying 8 GB for / (that's 8192 MB, > > or 8,388,608 KB), then the 512 MB swap, with the rest for /home, > > and see if that will be enough. I'm used to Mandriva, which > > allows custom package selection. Assuming Fedora has a similar > > feature, you many need to use that to exclude some of the larger > > packages, such as open office. > > Regards, Dave Hodgins > I got this same problem on disks that were well in excess of 100 GB.
From: The Derfer on 24 Apr 2010 22:20 On Apr 24, 10:14 pm, "David W. Hodgins" <dwhodg...(a)nomail.afraid.org> wrote: > On Sat, 24 Apr 2010 21:49:20 -0400, The Derfer <derf...(a)gmail.com> wrote: > > I got this same problem on disks that were well in excess > > of 100 GB. > > How much space is being allocated for the / filesystem? > > With everything except swap and /home on the / filesystem, I usually > setup around 15 GB for a full install, and increase that if I'll > be storing dvd iso images there. 25 GB gives me room for a copy > of the install iso, so I don't have to insert the dvd when installing > packages, plus room in /tmp for creating new iso images. > > In the fdisk output, sda1, which I'm guessing is being used for the > / filesystem, it only had 107520 KB, or 105 MB. No where near > enough space. sda1 was /boot sda2 was / sda3 was swap
From: unruh on 24 Apr 2010 23:21
On 2010-04-25, The Derfer <derf109(a)gmail.com> wrote: > On Apr 24, 10:14?pm, "David W. Hodgins" <dwhodg...(a)nomail.afraid.org> > wrote: >> On Sat, 24 Apr 2010 21:49:20 -0400, The Derfer <derf...(a)gmail.com> wrote: >> > I got this same problem on disks that were well in excess >> > of 100 GB. >> >> How much space is being allocated for the / filesystem? >> >> With everything except swap and /home on the / filesystem, I usually >> setup around 15 GB for a full install, and increase that if I'll >> be storing dvd iso images there. ?25 GB gives me room for a copy >> of the install iso, so I don't have to insert the dvd when installing >> packages, plus room in /tmp for creating new iso images. >> >> In the fdisk output, sda1, which I'm guessing is being used for the >> / filesystem, it only had 107520 KB, or 105 MB. ?No where near >> enough space. > > > sda1 was /boot > sda2 was / > sda3 was swap Why did you have a separate /boot? It is really unnecessary. / should have had enough room at 7GB. > |