Prev: VPN Client for Windows 5.01
Next: automating username/password when ssh to cisco router
From: Cisco.ahmed on 16 Apr 2008 03:01
hi,, I have cisco 837 router with RJ45 adsl port and My service
provider supply me with RJ11 adsl over voice signal (POTS) how to plug
RJ11 to RJ 45 thaanks
From: Merv on 16 Apr 2008 03:59
Try plugging the rj11 into the rj45 jack on router and see if it
locks.

Not sure it there is a difference in the pin geometry i.e the spacing
between the pins.

There are adapter for this purpose so just google for "RJ11 to RJ45
adapter" - you should get lots of hits
From: Bod43 on 16 Apr 2008 07:43
On 16 Apr, 09:59, Merv <merv.hr...(a)rogers.com> wrote:
> Try plugging the rj11 into the rj45 jack on router and see if it
> locks.
>
> Not sure it there is a difference in the pin geometry i.e the spacing
> between the pins.
>
> There are adapter for this purpose so just google for "RJ11 to RJ45
> adapter" - you should get lots of hits

837 does not have an RJ45 for the DSL.
Unless of course my memory is worse than I remember.

It has an RJ11.

http://www.cisco.com/en/US/docs/routers/access/800/831/software/release/notes/830rn.html#wp913852


http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=170209647113&ssPageName=MERC_VIC_RCRX_Pr4_PcY_BID_IT&refitem=170200418029&itemcount=4&refwidgetloc=closed_view_item&usedrule1=CrossSell_LogicX&refwidgettype=cross_promot_widget&_trksid=p284.m183&_trkparms=algo%3DCRX%26its%3DS%252BI%26itu%3DUCI%252BSI%26otn%3D4#ebayphotohosting


I suppose yours may have been made incorrrectly or changed later,
however
none of the 837's that I have seen have ever had an RJ45 ADSL
connector.


From: Merv on 16 Apr 2008 12:24
On Apr 16, 7:43 am, Bo...(a)hotmail.co.uk wrote:
> On 16 Apr, 09:59, Merv <merv.hr...(a)rogers.com> wrote:
>
> > Try plugging the rj11 into the rj45 jack on router and see if it
> > locks.
>
> > Not sure it there is a difference in the pin geometry i.e the spacing
> > between the pins.
>
> > There are adapter for this purpose so just google for "RJ11 to RJ45
> > adapter" - you should get lots of hits
>
> 837 does not have an RJ45 for the DSL.
> Unless of course my memory is worse than I remember.
>
> It has an RJ11.
>
> http://www.cisco.com/en/US/docs/routers/access/800/831/software/relea...
>
> http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=170209647113&ssPage...
>
> I suppose yours may have been made incorrrectly or changed later,
> however
> none of the 837's that I have seen have ever had an RJ45 ADSL
> connector.



here is an illustration of the rear of an 837 showing the ADSL RJ11
port

http://www.cisco.com/en/US/docs/routers/access/800/837/hardware/installation/guide/install.html#wp1015297

Notice that the ADSL port is on the right-hand side when viewed from
the rear

The LAN interfaces (RJ45) are on the left-hand side when viewed from
the rear


Is this where you were trying to connect the ADSL line to ?
 | 
Pages: 1
Prev: VPN Client for Windows 5.01
Next: automating username/password when ssh to cisco router