pm_op(): usb_dev_suspend+0x0/0x10 returns -2 on USB device 8087:0020
in [Kernel]
|
From: Sarah Sharp on 25 Feb 2010 15:00 On Thu, Feb 25, 2010 at 02:36:02PM -0500, Alan Stern wrote: > On Thu, 25 Feb 2010, Sarah Sharp wrote: > > > > > now, I unplug the USB DVD drive: > > > > > > > > Feb 25 17:35:38 tonkachi kernel: [ 276.374282] xhci_hcd 0000:02:00.0: > > > > WARN: transfer error on endpoint > > > > Feb 25 17:35:39 tonkachi kernel: [ 276.728151] xhci_hcd 0000:02:00.0: > > > > WARN: transfer error on endpoint > > > > Feb 25 17:35:39 tonkachi kernel: [ 276.728819] xhci_hcd 0000:02:00.0: > > > > WARN: transfer error on endpoint > > Shouldn't there be some messages here about "USB disconnect"? This > suggests there's something wrong with the root hub. True. I can't tell exactly what's going on without CONFIG_USB_XHCI_HCD_DEBUGGING. It's possible the xHCI host never notified the driver of the disconnect, or there's a bug in the xHCI hub emulation code. Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Alan Stern on 25 Feb 2010 17:30 On Thu, 25 Feb 2010, �kos Mar�y wrote: > BTW, any ideas on why suspend works with unloading xhci, but hibernate > not working? That's a power management issue, not a USB problem. Rafael may be able to help you. You'll probably want to start a new email thread on the linux-pm mailing list. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Sarah Sharp on 25 Feb 2010 19:20 On Thu, Feb 25, 2010 at 11:37:36PM +0100, �kos Mar�y wrote: > Sarah, > > > True. I can't tell exactly what's going on without > > CONFIG_USB_XHCI_HCD_DEBUGGING. It's possible the xHCI host never > > notified the driver of the disconnect, or there's a bug in the xHCI hub > > emulation code. > > after having turned this option on in the kernel, this is what I get > when plugging in the device: > > Feb 25 23:32:14 tonkachi kernel: [ 100.473783] Registered led device: > iwl-phy0::radio > Feb 25 23:32:14 tonkachi kernel: [ 100.473812] Registered led device: > iwl-phy0::assoc > Feb 25 23:32:14 tonkachi kernel: [ 100.473839] Registered led device: > iwl-phy0::RX > Feb 25 23:32:14 tonkachi kernel: [ 100.473864] Registered led device: > iwl-phy0::TX > Feb 25 23:32:14 tonkachi kernel: [ 100.497848] usb 2-4: new high speed > USB device using xhci_hcd and address 0 > Feb 25 23:32:14 tonkachi kernel: [ 100.520591] usb 2-4: New USB device > found, idVendor=058f, idProduct=6254 > Feb 25 23:32:14 tonkachi kernel: [ 100.520595] usb 2-4: New USB device > strings: Mfr=0, Product=0, SerialNumber=0 > Feb 25 23:32:14 tonkachi kernel: [ 100.520680] usb 2-4: configuration > #1 chosen from 1 choice > Feb 25 23:32:14 tonkachi kernel: [ 100.520732] usb 2-4: ep 0x81 - > rounding interval to 2048 microframes > Feb 25 23:32:14 tonkachi kernel: [ 100.522403] hub 2-4:1.0: USB hub found > Feb 25 23:32:14 tonkachi kernel: [ 100.522930] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.523156] hub 2-4:1.0: 3 ports > detected > Feb 25 23:32:14 tonkachi kernel: [ 100.825758] usb 2-4.1: new high > speed USB device using xhci_hcd and address 0 > Feb 25 23:32:14 tonkachi kernel: [ 100.848327] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.849375] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.850370] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.851366] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.851782] usb 2-4.1: New USB > device found, idVendor=152d, idProduct=2339 > Feb 25 23:32:14 tonkachi kernel: [ 100.851785] usb 2-4.1: New USB > device strings: Mfr=1, Product=2, SerialNumber=5 > Feb 25 23:32:14 tonkachi kernel: [ 100.851790] usb 2-4.1: Product: USB > to ATA/ATAPI Bridge > Feb 25 23:32:14 tonkachi kernel: [ 100.851792] usb 2-4.1: Manufacturer: > JMicron > Feb 25 23:32:14 tonkachi kernel: [ 100.851795] usb 2-4.1: SerialNumber: > 6A1713351FFF > Feb 25 23:32:14 tonkachi kernel: [ 100.851873] usb 2-4.1: configuration > #1 chosen from 1 choice > Feb 25 23:32:14 tonkachi kernel: [ 100.854283] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.855037] xhci_hcd 0000:02:00.0: > WARN: short transfer on control ep > Feb 25 23:32:14 tonkachi kernel: [ 100.879271] Initializing USB Mass > Storage driver... > Feb 25 23:32:14 tonkachi kernel: [ 100.879988] scsi6 : SCSI emulation > for USB Mass Storage devices > Feb 25 23:32:14 tonkachi kernel: [ 100.880141] usbcore: registered new > interface driver usb-storage > Feb 25 23:32:14 tonkachi kernel: [ 100.880147] USB Mass Storage support > registered. > Feb 25 23:32:19 tonkachi kernel: [ 105.884853] scsi 6:0:0:0: CD-ROM > hp DVDRAM GT20L DC05 PQ: 0 ANSI: 0 > Feb 25 23:32:19 tonkachi kernel: <0: `MEM_WRITE_DWORD(3'b000, > 32'hffffc90000hi0 00000.1fevhc anl0d0i 02-:e0x t2); > Feb 25 23:32:19 tonkachi kernel: x1.0: _ca0 00000000 01000000 02038000 > Feb 25 23:32:19 tonkachi kernel: x1.0: `MEM_W_c70 000000 f__h:had > c2c]:00-:e0x t3); > Feb 25 23:32:19 tonkachi kernel: _tist us:i 00Tx] 5b78b073ndxh0.0 > _c.]70h ]00t0:xhcf3) 754'hf);x.23000:02:00.0: `MEM_WRITE_DWORD(3'b000, > 32'hffffc90000c7c024, 32'h8, 4'hf); > Feb 25 23:32:19 tonkachi kernel: 603n00nt 0<05.898876] xhci_hcd > 0000:00h00MEM_WRITE_10 wn.8eh:0c>78 0 i_0 013Ue9:020) > Feb 25 23:32:19 tonkachi kernel: 02:00.i0h00.0: New dequeue pointer = > 0x375b78d0 (DMA) > Feb 25 23:32:19 tonkachi kernel: 19 > Feb 25 23:32:19 tonkachi kernel: 3d07` 300ee e_ i7c67 o5.899445] 9fc It looks like you're getting log corruption from the xHCI driver being too verbose now. :( I've been meaning to make a log level patch for the driver and cut out the less-than-useful bits for while. Let me do a quick pass at that so we can get the interesting information. > with un-plugging, I get: > > Feb 25 23:33:07 tonkachi kernel: [ 153.205311] xhci_hcd 0000:02:00.0: > WARN: transfer error on endpoint > Feb 25 23:33:08 tonkachi kernel: [ 154.008265] xhci_hcd 0000:02:00.0: > WARN: transfer error on endpoint > Feb 25 23:33:08 tonkachi kernel: [ 154.008995] xhci_hcd 0000:02:00.0: > WARN: transfer error on endpoint There should be a lot more debugging here. Perhaps you were collecting only the warning-level kernel messages? Did you send the full dmesg from /var/log/kern.log or run `dmesg -n 8` before capturing the dmesg input? Actually, I wonder if 2.6.32 stable needs commit bcef3fd from 2.6.33. If the xHCI driver wasn't cleaning up the endpoint rings properly after a transfer error, I suppose the hardware could get wedged. > at this point, rmmod xhci doesn't even work anymore, I get stuff during > / around the rmmod like: > > Feb 25 23:34:24 tonkachi kernel: [ 230.133711] xhci_hcd 0000:02:00.0: > remove, state 1 Aw, man, it looks like your xHCI disconnected from the bus. Something was seriously wrong with the hardware. Still, the xHCI driver should have failed gracefully in that case. That should have been handled by commits c526d0d, e34b2fb, and e4ab05d, which are in 2.6.32 and 2.6.33. > Feb 25 23:34:24 tonkachi kernel: [ 230.133727] usb usb2: USB > disconnect, address 1 > Feb 25 23:34:24 tonkachi kernel: [ 230.133731] usb 2-4: USB disconnect, > address 2 > Feb 25 23:34:24 tonkachi kernel: [ 230.133735] usb 2-4.1: USB > disconnect, address 3 > > > > at the end, with rmmod still not returning, but doing a re-plug, I get: > > > Feb 25 23:36:37 tonkachi kernel: [ 363.295298] rmmod D > ffff88002834fa28 0 2818 2802 0x00000004 > Feb 25 23:36:37 tonkachi kernel: [ 363.295307] ffff88022f581b88 > 0000000000000086 0000000000000000 0000000000000282 > Feb 25 23:36:37 tonkachi kernel: [ 363.295315] 00000000fffffffe > ffffffff81a0bf78 ffff88023fc3c8a0 00000000ffffe4be > Feb 25 23:36:37 tonkachi kernel: [ 363.295323] ffff8802332403c0 > ffff88022f581fd8 000000000000fa28 ffff8802332403c0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295331] Call Trace: > Feb 25 23:36:37 tonkachi kernel: [ 363.295344] [<ffffffff813b3ff5>] > usb_kill_urb+0x85/0xc0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295353] [<ffffffff8107d8b0>] ? > autoremove_wake_function+0x0/0x40 > Feb 25 23:36:37 tonkachi kernel: [ 363.295360] [<ffffffff813b43c6>] ? > usb_get_urb+0x16/0x20 > Feb 25 23:36:37 tonkachi kernel: [ 363.295367] [<ffffffff813b27db>] > usb_hcd_flush_endpoint+0xcb/0x1b0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295374] [<ffffffff813b4d18>] > usb_disable_endpoint+0x58/0x90 > Feb 25 23:36:37 tonkachi kernel: [ 363.295381] [<ffffffff813b4dd9>] > usb_disable_device+0x89/0x1f0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295388] [<ffffffff813adc3d>] > usb_disconnect+0xfd/0x180 > Feb 25 23:36:37 tonkachi kernel: [ 363.295394] [<ffffffff813adbff>] > usb_disconnect+0xbf/0x180 > Feb 25 23:36:37 tonkachi kernel: [ 363.295400] [<ffffffff813b1a5d>] > usb_remove_hcd+0xcd/0x130 > Feb 25 23:36:37 tonkachi kernel: [ 363.295408] [<ffffffff813c2236>] > usb_hcd_pci_remove+0x26/0xa0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295416] [<ffffffff812a0fdf>] > pci_device_remove+0x2f/0x60 > Feb 25 23:36:37 tonkachi kernel: [ 363.295433] [<ffffffff81334bd3>] > __device_release_driver+0x53/0xb0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295440] [<ffffffff81334cf8>] > driver_detach+0xc8/0xd0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295448] [<ffffffff81333c65>] > bus_remove_driver+0x85/0xe0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295456] [<ffffffff813352ba>] > driver_unregister+0x5a/0x90 > Feb 25 23:36:37 tonkachi kernel: [ 363.295464] [<ffffffff812a12d0>] > pci_unregister_driver+0x40/0xb0 > Feb 25 23:36:37 tonkachi kernel: [ 363.295476] [<ffffffffa0048b80>] > xhci_unregister_pci+0x10/0x20 [xhci] > Feb 25 23:36:37 tonkachi kernel: [ 363.295485] [<ffffffffa004e459>] > xhci_hcd_cleanup+0x9/0xb [xhci] > Feb 25 23:36:37 tonkachi kernel: [ 363.295493] [<ffffffff81095768>] > sys_delete_module+0x1a8/0x270 > Feb 25 23:36:37 tonkachi kernel: [ 363.295500] [<ffffffff81081bd9>] ? > up_read+0x9/0x10 > Feb 25 23:36:37 tonkachi kernel: [ 363.295510] [<ffffffff81011f82>] > system_call_fastpath+0x16/0x1b If the hardware wasn't responding properly to commands, then URBs wouldn't have been able to be killed, the USB core would have sat around waiting on those URBs, and rmmod could never exit. I need a more detailed log to figure out exactly why the hardware is wedged though. Let me make the less-verbose debugging patch so you don't get log corruption, and then we'll see what's going on. Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Alan Stern on 26 Feb 2010 11:20 On Thu, 25 Feb 2010, Sarah Sharp wrote: > > at this point, rmmod xhci doesn't even work anymore, I get stuff during > > / around the rmmod like: > > > > Feb 25 23:34:24 tonkachi kernel: [ 230.133711] xhci_hcd 0000:02:00.0: > > remove, state 1 > > Aw, man, it looks like your xHCI disconnected from the bus. Something > was seriously wrong with the hardware. Why do you say that? Isn't this exactly the sort of thing you expect to see in the log when xhci-hcd is unloaded? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Sarah Sharp on 26 Feb 2010 11:40 On Fri, Feb 26, 2010 at 11:12:50AM -0500, Alan Stern wrote: > On Thu, 25 Feb 2010, Sarah Sharp wrote: > > > > at this point, rmmod xhci doesn't even work anymore, I get stuff during > > > / around the rmmod like: > > > > > > Feb 25 23:34:24 tonkachi kernel: [ 230.133711] xhci_hcd 0000:02:00.0: > > > remove, state 1 > > > > Aw, man, it looks like your xHCI disconnected from the bus. Something > > was seriously wrong with the hardware. > > Why do you say that? Isn't this exactly the sort of thing you expect > to see in the log when xhci-hcd is unloaded? Yes, I forgot he was unloading the driver. That's normal then. Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
First
|
Prev
|
Next
|
Last
Pages: 1 2 3 Prev: udf: use ext2_find_next_bit Next: [ANNOUNCE] 2.6.33-rc8-rt2 |