Prev: DHCP Client
Next: Upnp - internet connection icon in system tray
From: syec on 1 May 2008 04:52
im having network connection with a server and 12 client computers one of my
computer is showing the connection is connected with 100mbps but in the
status its only receiving the data not sending at all, sending data is 0
always. when i connect other wire its ok. i checked with crimping also i
tried almost 10 rj45 connector but the problem is same but whn i used it with
different existing wire it shows me ok.. sending & receiving data are
perfectly alright please help me in this.. thnx.
From: Robert L. (MS-MVP) on 1 May 2008 09:33
If receiving or sending is 0, it could be incompatible issue. You may want
to check any new driver for the NIC or re-configure NIC speed. This post may
help too.

Solved: Limited connectivity with ...Dec 3, 2007 ... A: You may need to
re-configure the NIC, for example low the speed. This search result may
help, Troubleshooting limited or no connectivity ...
www.chicagotech.net/netforums/viewtopic.php?t=246


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"syec" <syec(a)discussions.microsoft.com> wrote in message
news:E450819C-A3EE-4B9D-BFE0-A2234DF99587(a)microsoft.com...
> im having network connection with a server and 12 client computers one of
> my
> computer is showing the connection is connected with 100mbps but in the
> status its only receiving the data not sending at all, sending data is 0
> always. when i connect other wire its ok. i checked with crimping also i
> tried almost 10 rj45 connector but the problem is same but whn i used it
> with
> different existing wire it shows me ok.. sending & receiving data are
> perfectly alright please help me in this.. thnx.

 | 
Pages: 1
Prev: DHCP Client
Next: Upnp - internet connection icon in system tray