Prev: [GIT]: Sparc
Next: [PATCH -tip 03/10] perf probe: Move add-probe routine under util/
From: Greg KH on 16 Mar 2010 18:00
On Tue, Mar 16, 2010 at 04:05:45PM -0500, Jason Wessel wrote:
> This patch tries to solve the problem that data is lost because there
> are too many outstanding transmit urb's while trying to execute
> printk's to a console. The same is true if you try something like
> "echo t > /proc/sysrq-trigger".
>
> This patch takes the route of forcibly polling the hcd device to drain
> the urb queue in order to initiate the bulk write call backs. This
> only happens if the device is a usb serial console device that sets
> the max_in_flight_urbs to a non zero value in the serial device
> structure.
>
> A few millisecond penalty will get incurred to allow the hcd controller
> to complete a write urb, else the console data is thrown away.
>
> The max_in_flight_urbs was reduced in the usb_debug driver because it
> is highly desired to push things out to the console in a timely
> fashion and there is no need to have a queue that large for the
> interrupt driven mode of operation when used through the tty
> interface.

Will this new interface also be the same one that the usb debugger will
need to tie into the hcd drivers?

Either way, I'd like to get Alan Stern's ack on this before accepting it.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: [GIT]: Sparc
Next: [PATCH -tip 03/10] perf probe: Move add-probe routine under util/