Prev: HydraXC + EDK
Next: ACTEL FPGA static timing analysis
From: Antti on 24 Apr 2008 10:52
On 24 Apr., 15:27, Narendra Sisodiya <narendra.sisod...(a)gmail.com>
wrote:
> I need to send video stream over a bluetoth link ,
> case 1 ) the video lise is some format (suggest a easy format) in CF
> compact flash card , I need to read this file and send it through
> UART, Kindly give me any link to do this
>
> case 2 ) I have vidoe starter kit and video is need to be captured and
> processed and then I will send it through UART
>
> which case will be easy ?
>
> another problem is , I have bluetooth Kit (ROK101007) which has
> protocol stack upto HCI layer - I need to transfer stream via
> bluetooth , so inorder to transfer data I think i need to make HCI
> Interface layer in VHDL and put the data in HCI data format and then
> transmit it via UART connection,,
> suggest me what to do,, I ultimater goal is to transfer video data
> (either live stream or file stored in CF card ) via Bluetooth Link,
> I have bluetooth Kit (contains layer upto HCI ) -- see it diagram at
> --
>
> http://bp3.blogger.com/_AOehQh51ooE/R722ZML8iII/AAAAAAAAAVk/o92AjwOZe...
>
> Thanks n Regards

the ROK is NOT real HCI compliant thing at all.. check the reference
designs from memec (now avnet) there are some sources for this module


Antti
From: Narendra Sisodiya on 24 Apr 2008 13:34
On Apr 24, 7:52 pm, Antti <Antti.Luk...(a)googlemail.com> wrote:
> On 24 Apr., 15:27, Narendra Sisodiya <narendra.sisod...(a)gmail.com>
> wrote:
>
>
>
> > I need to send video stream over a bluetoth link ,
> > case 1 ) the video lise is some format (suggest a easy format) in CF
> > compact flash card , I need to read this file and send it through
> > UART, Kindly give me any link to do this
>
> > case 2 ) I have vidoe starter kit and video is need to be captured and
> > processed and then I will send it through UART
>
> > which case will be easy ?
>
> > another problem is , I have bluetooth Kit (ROK101007) which has
> > protocol stack upto HCI layer - I need to transfer stream via
> > bluetooth , so inorder to transfer data I think i need to make HCI
> > Interface layer in VHDL and put the data in HCI data format and then
> > transmit it via UART connection,,
> > suggest me what to do,, I ultimater goal is to transfer video data
> > (either live stream or file stored in CF card ) via Bluetooth Link,
> > I have bluetooth Kit (contains layer upto HCI ) -- see it diagram at
> > --
>
> >http://bp3.blogger.com/_AOehQh51ooE/R722ZML8iII/AAAAAAAAAVk/o92AjwOZe...
>
> > Thanks n Regards
>
> the ROK is NOT real HCI compliant thing at all.. check the reference
> designs from memec (now avnet) there are some sources for this module
>
> Antti

May you suggest any good bluetooth kit which will be suited for my
work and any existing work for bluetooth data transfer from FPGA,
basically , In PC (Linux ) we have blueZ stack which will communicate
with kits, I cannot have embedded linux on my design,, i have to make
a VHDL source and EDK project which can communicate to any bluetooth
kit , So I think I have to design the the stack in Hardware .. am i
coorect....?? Pelase help me-- what to do,,,
From: Antti on 24 Apr 2008 14:07
On 24 Apr., 19:34, Narendra Sisodiya <narendra.sisod...(a)gmail.com>
wrote:
> On Apr 24, 7:52 pm, Antti <Antti.Luk...(a)googlemail.com> wrote:
>
>
>
> > On 24 Apr., 15:27, Narendra Sisodiya <narendra.sisod...(a)gmail.com>
> > wrote:
>
> > > I need to send video stream over a bluetoth link ,
> > > case 1 ) the video lise is some format (suggest a easy format) in CF
> > > compact flash card , I need to read this file and send it through
> > > UART, Kindly give me any link to do this
>
> > > case 2 ) I have vidoe starter kit and video is need to be captured and
> > > processed and then I will send it through UART
>
> > > which case will be easy ?
>
> > > another problem is , I have bluetooth Kit (ROK101007) which has
> > > protocol stack upto HCI layer - I need to transfer stream via
> > > bluetooth , so inorder to transfer data I think i need to make HCI
> > > Interface layer in VHDL and put the data in HCI data format and then
> > > transmit it via UART connection,,
> > > suggest me what to do,, I ultimater goal is to transfer video data
> > > (either live stream or file stored in CF card ) via Bluetooth Link,
> > > I have bluetooth Kit (contains layer upto HCI ) -- see it diagram at
> > > --
>
> > >http://bp3.blogger.com/_AOehQh51ooE/R722ZML8iII/AAAAAAAAAVk/o92AjwOZe...
>
> > > Thanks n Regards
>
> > the ROK is NOT real HCI compliant thing at all.. check the reference
> > designs from memec (now avnet) there are some sources for this module
>
> > Antti
>
> May you suggest any good bluetooth kit which will be suited for my
> work and any existing work for bluetooth data transfer from FPGA,
> basically , In PC (Linux ) we have blueZ stack which will communicate
> with kits, I cannot have embedded linux on my design,, i have to make
> a VHDL source and EDK project which can communicate to any bluetooth
> kit , So I think I have to design the the stack in Hardware .. am i
> coorect....?? Pelase help me-- what to do,,,

no, you are not coorect.

Antti
From: Narendra Sisodiya on 24 Apr 2008 18:25
On Apr 24, 11:07 pm, Antti <Antti.Luk...(a)googlemail.com> wrote:
> On 24 Apr., 19:34, Narendra Sisodiya <narendra.sisod...(a)gmail.com>
> wrote:
>
>
>
> > On Apr 24, 7:52 pm, Antti <Antti.Luk...(a)googlemail.com> wrote:
>
> > > On 24 Apr., 15:27, Narendra Sisodiya <narendra.sisod...(a)gmail.com>
> > > wrote:
>
> > > > I need to send video stream over a bluetoth link ,
> > > > case 1 ) the video lise is some format (suggest a easy format) in CF
> > > > compact flash card , I need to read this file and send it through
> > > > UART, Kindly give me any link to do this
>
> > > > case 2 ) I have vidoe starter kit and video is need to be captured and
> > > > processed and then I will send it through UART
>
> > > > which case will be easy ?
>
> > > > another problem is , I have bluetooth Kit (ROK101007) which has
> > > > protocol stack upto HCI layer - I need to transfer stream via
> > > > bluetooth , so inorder to transfer data I think i need to make HCI
> > > > Interface layer in VHDL and put the data in HCI data format and then
> > > > transmit it via UART connection,,
> > > > suggest me what to do,, I ultimater goal is to transfer video data
> > > > (either live stream or file stored in CF card ) via Bluetooth Link,
> > > > I have bluetooth Kit (contains layer upto HCI ) -- see it diagram at
> > > > --
>
> > > >http://bp3.blogger.com/_AOehQh51ooE/R722ZML8iII/AAAAAAAAAVk/o92AjwOZe...
>
> > > > Thanks n Regards
>
> > > the ROK is NOT real HCI compliant thing at all.. check the reference
> > > designs from memec (now avnet) there are some sources for this module
>
> > > Antti
>
> > May you suggest any good bluetooth kit which will be suited for my
> > work and any existing work for bluetooth data transfer from FPGA,
> > basically , In PC (Linux ) we have blueZ stack which will communicate
> > with kits, I cannot have embedded linux on my design,, i have to make
> > a VHDL source and EDK project which can communicate to any bluetooth
> > kit , So I think I have to design the the stack in Hardware .. am i
> > coorect....?? Pelase help me-- what to do,,,
>
> no, you are not coorect.
>
> Antti

Ok, I am wrong , then please tell me how to do this task, ?
 | 
Pages: 1
Prev: HydraXC + EDK
Next: ACTEL FPGA static timing analysis