From: Greg KH on
2.6.31-stable review patch. If anyone has any objections, please let us know.

------------------

commit 1c010ff8912cbc08d80e865aab9c32b6b00c527d upstream.

The functionality bit vector is always returned as a little-endian
32-bit number by the device, so it must be byte-swapped to the host
endianness.

On the other hand, the delay value is handled by the USB stack, so no
byte swapping is needed on our side.

This fixes bug #15105:
http://bugzilla.kernel.org/show_bug.cgi?id=15105

Reported-by: Jens Richter <jens(a)richter-stutensee.de>
Signed-off-by: Jean Delvare <khali(a)linux-fr.org>
Tested-by: Jens Richter <jens(a)richter-stutensee.de>
Cc: Till Harbaum <till(a)harbaum.org>
Cc: stable(a)kernel.org
Acked-by: Jean Delvare <jdelvare(a)suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)suse.de>
---
drivers/i2c/busses/i2c-tiny-usb.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
+#include <linux/types.h>

/* include interfaces to usb layer */
#include <linux/usb.h>
@@ -31,8 +32,8 @@
#define CMD_I2C_IO_END (1<<1)

/* i2c bit delay, default is 10us -> 100kHz */
-static int delay = 10;
-module_param(delay, int, 0);
+static unsigned short delay = 10;
+module_param(delay, ushort, 0);
MODULE_PARM_DESC(delay, "bit delay in microseconds, "
"e.g. 10 for 100kHz (default is 100kHz)");

@@ -109,7 +110,7 @@ static int usb_xfer(struct i2c_adapter *

static u32 usb_func(struct i2c_adapter *adapter)
{
- u32 func;
+ __le32 func;

/* get functionality from adapter */
if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) !=
@@ -118,7 +119,7 @@ static u32 usb_func(struct i2c_adapter *
return 0;
}

- return func;
+ return le32_to_cpu(func);
}

/* This is the actual algorithm we define */
@@ -216,8 +217,7 @@ static int i2c_tiny_usb_probe(struct usb
"i2c-tiny-usb at bus %03d device %03d",
dev->usb_dev->bus->busnum, dev->usb_dev->devnum);

- if (usb_write(&dev->adapter, CMD_SET_DELAY,
- cpu_to_le16(delay), 0, NULL, 0) != 0) {
+ if (usb_write(&dev->adapter, CMD_SET_DELAY, delay, 0, NULL, 0) != 0) {
dev_err(&dev->adapter.dev,
"failure setting delay to %dus\n", delay);
retval = -EIO;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/