From: Peacock, Joshua on
I am running 32bit and I would take that version to do some testing
with.

Will I need to file a bug report for this?

Thanks

-----Original Message-----
From: William Jojo [mailto:w.jojo(a)hvcc.edu]
Sent: Thursday, January 14, 2010 1:45 PM
To: Peacock, Joshua
Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
Subject: Re: [Samba] AIX and DFS

Peacock, Joshua wrote:
> Thanks for all your help. I am using packages from pware.
>
> But I downloaded the the source for 3.3.7 and just ran a configure and
I
> get the following in the config.log
>
> samba_cv_HAVE_BROKEN_READLINK=no
>
> Which I thought would need to be set to yes.
>
> I don't have access to a ftp/sftp site that I can give you access too.
> How would you like me to get you the log file (92k)?
>
>

Just following this thread I did some digging and I think readlink is
working as written. :-)

http://www1.hrz.tu-darmstadt.de/hhlr/doku/sw/apidiffs.html#readlink
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.i
bm.aix.basetechref/doc/basetrf2/symlink.htm

I think we either need to add AIX to the ifdef or properly handle the
ERANGE. The former looks easier. ;-)

At any rate, Joshua, are you using the 32- or 64-bit version of 3.3.7? I

have a 32-bit patched smbd replacement you can test with the original
patch Volker suggested. I can make a 64-bit if you need that.
Interested?

Cheers,
Bill


> This is AIX 6.1
>
> Thanks
>
> -----Original Message-----
> From: Volker Lendecke [mailto:Volker.Lendecke(a)SerNet.DE]
> Sent: Thursday, January 14, 2010 9:48 AM
> To: Peacock, Joshua
> Cc: samba(a)lists.samba.org
> Subject: Re: [Samba] AIX and DFS
>
> On Thu, Jan 14, 2010 at 09:05:27AM -0600, Peacock, Joshua wrote:
>
>> https://bugzilla.samba.org/show_bug.cgi?id=6330
>>
>
> Heh, too much going on for my aging brain...
>
>
>> Miguel sent me the following bug report which states its fixed in
>> 3.3.5
>>
>> Does this mean it needs to be compiled with an option to define
>> HAVE_BROKEN_READLINK?
>>
>
> It should have figured that out itself if it is indeed fixed in 3.3.5.
> Can you post your config.log file somewhere?
>
> Thanks,
>
> Volker
> This message is intended only for the persons or entities to which it
is
> addressed. The information transmitted herein may contain proprietary
or
> confidential material. Review, reproduction, retransmission,
distribution,
> disclosure or other use, and any consequent action taken by persons or
> entities other than intended recipients, are prohibited and may be
unlawful.
> If you are not the intended recipient, please delete this information
from
> your system and contact the sender. The information contained herein
is
> subject to change without notice. Although reasonable precautions have
been
> taken to ensure that no viruses are present, the sender makes no
warranty
> or guaranty with respect thereto, and is not responsible for any loss
or
> damage arising from the receipt or use of this e-mail or attachments
hereto.
>
>

This message is intended only for the persons or entities to which it is
addressed. The information transmitted herein may contain proprietary or
confidential material. Review, reproduction, retransmission, distribution,
disclosure or other use, and any consequent action taken by persons or
entities other than intended recipients, are prohibited and may be unlawful.
If you are not the intended recipient, please delete this information from
your system and contact the sender. The information contained herein is
subject to change without notice. Although reasonable precautions have been
taken to ensure that no viruses are present, the sender makes no warranty
or guaranty with respect thereto, and is not responsible for any loss or
damage arising from the receipt or use of this e-mail or attachments hereto.

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
From: William Jojo on
Peacock, Joshua wrote:
> I am running 32bit and I would take that version to do some testing
> with.
>
> Will I need to file a bug report for this?
>
>

The new smbd is here:

http://pware.hvcc.edu/download/aix53/joshua/smbd


And if this fixes the problem, I'll file the bug and follow up with Volker.


Cheers,
Bill


> Thanks
>
> -----Original Message-----
> From: William Jojo [mailto:w.jojo(a)hvcc.edu]
> Sent: Thursday, January 14, 2010 1:45 PM
> To: Peacock, Joshua
> Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
> Subject: Re: [Samba] AIX and DFS
>
> Peacock, Joshua wrote:
>
>> Thanks for all your help. I am using packages from pware.
>>
>> But I downloaded the the source for 3.3.7 and just ran a configure and
>>
> I
>
>> get the following in the config.log
>>
>> samba_cv_HAVE_BROKEN_READLINK=no
>>
>> Which I thought would need to be set to yes.
>>
>> I don't have access to a ftp/sftp site that I can give you access too.
>> How would you like me to get you the log file (92k)?
>>
>>
>>
>
> Just following this thread I did some digging and I think readlink is
> working as written. :-)
>
> http://www1.hrz.tu-darmstadt.de/hhlr/doku/sw/apidiffs.html#readlink
> http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.i
> bm.aix.basetechref/doc/basetrf2/symlink.htm
>
> I think we either need to add AIX to the ifdef or properly handle the
> ERANGE. The former looks easier. ;-)
>
> At any rate, Joshua, are you using the 32- or 64-bit version of 3.3.7? I
>
> have a 32-bit patched smbd replacement you can test with the original
> patch Volker suggested. I can make a 64-bit if you need that.
> Interested?
>
> Cheers,
> Bill
>
>
>
>> This is AIX 6.1
>>
>> Thanks
>>
>> -----Original Message-----
>> From: Volker Lendecke [mailto:Volker.Lendecke(a)SerNet.DE]
>> Sent: Thursday, January 14, 2010 9:48 AM
>> To: Peacock, Joshua
>> Cc: samba(a)lists.samba.org
>> Subject: Re: [Samba] AIX and DFS
>>
>> On Thu, Jan 14, 2010 at 09:05:27AM -0600, Peacock, Joshua wrote:
>>
>>
>>> https://bugzilla.samba.org/show_bug.cgi?id=6330
>>>
>>>
>> Heh, too much going on for my aging brain...
>>
>>
>>
>>> Miguel sent me the following bug report which states its fixed in
>>> 3.3.5
>>>
>>> Does this mean it needs to be compiled with an option to define
>>> HAVE_BROKEN_READLINK?
>>>
>>>
>> It should have figured that out itself if it is indeed fixed in 3.3.5.
>> Can you post your config.log file somewhere?
>>
>> Thanks,
>>
>> Volker
>> This message is intended only for the persons or entities to which it
>>
> is
>
>> addressed. The information transmitted herein may contain proprietary
>>
> or
>
>> confidential material. Review, reproduction, retransmission,
>>
> distribution,
>
>> disclosure or other use, and any consequent action taken by persons or
>> entities other than intended recipients, are prohibited and may be
>>
> unlawful.
>
>> If you are not the intended recipient, please delete this information
>>
> from
>
>> your system and contact the sender. The information contained herein
>>
> is
>
>> subject to change without notice. Although reasonable precautions have
>>
> been
>
>> taken to ensure that no viruses are present, the sender makes no
>>
> warranty
>
>> or guaranty with respect thereto, and is not responsible for any loss
>>
> or
>
>> damage arising from the receipt or use of this e-mail or attachments
>>
> hereto.
>
>>
>>
>
> This message is intended only for the persons or entities to which it is
> addressed. The information transmitted herein may contain proprietary or
> confidential material. Review, reproduction, retransmission, distribution,
> disclosure or other use, and any consequent action taken by persons or
> entities other than intended recipients, are prohibited and may be unlawful.
> If you are not the intended recipient, please delete this information from
> your system and contact the sender. The information contained herein is
> subject to change without notice. Although reasonable precautions have been
> taken to ensure that no viruses are present, the sender makes no warranty
> or guaranty with respect thereto, and is not responsible for any loss or
> damage arising from the receipt or use of this e-mail or attachments hereto.
>
>

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
From: Peacock, Joshua on
Thanks I will let you know how it works

-----Original Message-----
From: William Jojo [mailto:w.jojo(a)hvcc.edu]
Sent: Thursday, January 14, 2010 2:13 PM
To: Peacock, Joshua
Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
Subject: Re: [Samba] AIX and DFS

Peacock, Joshua wrote:
> I am running 32bit and I would take that version to do some testing
> with.
>
> Will I need to file a bug report for this?
>
>

The new smbd is here:

http://pware.hvcc.edu/download/aix53/joshua/smbd


And if this fixes the problem, I'll file the bug and follow up with
Volker.


Cheers,
Bill


> Thanks
>
> -----Original Message-----
> From: William Jojo [mailto:w.jojo(a)hvcc.edu]
> Sent: Thursday, January 14, 2010 1:45 PM
> To: Peacock, Joshua
> Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
> Subject: Re: [Samba] AIX and DFS
>
> Peacock, Joshua wrote:
>
>> Thanks for all your help. I am using packages from pware.
>>
>> But I downloaded the the source for 3.3.7 and just ran a configure
and
>>
> I
>
>> get the following in the config.log
>>
>> samba_cv_HAVE_BROKEN_READLINK=no
>>
>> Which I thought would need to be set to yes.
>>
>> I don't have access to a ftp/sftp site that I can give you access
too.
>> How would you like me to get you the log file (92k)?
>>
>>
>>
>
> Just following this thread I did some digging and I think readlink is
> working as written. :-)
>
> http://www1.hrz.tu-darmstadt.de/hhlr/doku/sw/apidiffs.html#readlink
>
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.i
> bm.aix.basetechref/doc/basetrf2/symlink.htm
>
> I think we either need to add AIX to the ifdef or properly handle the
> ERANGE. The former looks easier. ;-)
>
> At any rate, Joshua, are you using the 32- or 64-bit version of 3.3.7?
I
>
> have a 32-bit patched smbd replacement you can test with the original
> patch Volker suggested. I can make a 64-bit if you need that.
> Interested?
>
> Cheers,
> Bill
>
>
>
>> This is AIX 6.1
>>
>> Thanks
>>
>> -----Original Message-----
>> From: Volker Lendecke [mailto:Volker.Lendecke(a)SerNet.DE]
>> Sent: Thursday, January 14, 2010 9:48 AM
>> To: Peacock, Joshua
>> Cc: samba(a)lists.samba.org
>> Subject: Re: [Samba] AIX and DFS
>>
>> On Thu, Jan 14, 2010 at 09:05:27AM -0600, Peacock, Joshua wrote:
>>
>>
>>> https://bugzilla.samba.org/show_bug.cgi?id=6330
>>>
>>>
>> Heh, too much going on for my aging brain...
>>
>>
>>
>>> Miguel sent me the following bug report which states its fixed in
>>> 3.3.5
>>>
>>> Does this mean it needs to be compiled with an option to define
>>> HAVE_BROKEN_READLINK?
>>>
>>>
>> It should have figured that out itself if it is indeed fixed in
3.3.5.
>> Can you post your config.log file somewhere?
>>
>> Thanks,
>>
>> Volker
>> This message is intended only for the persons or entities to which it
>>
> is
>
>> addressed. The information transmitted herein may contain proprietary
>>
> or
>
>> confidential material. Review, reproduction, retransmission,
>>
> distribution,
>
>> disclosure or other use, and any consequent action taken by persons
or
>> entities other than intended recipients, are prohibited and may be
>>
> unlawful.
>
>> If you are not the intended recipient, please delete this information
>>
> from
>
>> your system and contact the sender. The information contained herein
>>
> is
>
>> subject to change without notice. Although reasonable precautions
have
>>
> been
>
>> taken to ensure that no viruses are present, the sender makes no
>>
> warranty
>
>> or guaranty with respect thereto, and is not responsible for any loss
>>
> or
>
>> damage arising from the receipt or use of this e-mail or attachments
>>
> hereto.
>
>>
>>
>
> This message is intended only for the persons or entities to which it
is
> addressed. The information transmitted herein may contain proprietary
or
> confidential material. Review, reproduction, retransmission,
distribution,
> disclosure or other use, and any consequent action taken by persons or
> entities other than intended recipients, are prohibited and may be
unlawful.
> If you are not the intended recipient, please delete this information
from
> your system and contact the sender. The information contained herein
is
> subject to change without notice. Although reasonable precautions have
been
> taken to ensure that no viruses are present, the sender makes no
warranty
> or guaranty with respect thereto, and is not responsible for any loss
or
> damage arising from the receipt or use of this e-mail or attachments
hereto.
>
>

This message is intended only for the persons or entities to which it is
addressed. The information transmitted herein may contain proprietary or
confidential material. Review, reproduction, retransmission, distribution,
disclosure or other use, and any consequent action taken by persons or
entities other than intended recipients, are prohibited and may be unlawful.
If you are not the intended recipient, please delete this information from
your system and contact the sender. The information contained herein is
subject to change without notice. Although reasonable precautions have been
taken to ensure that no viruses are present, the sender makes no warranty
or guaranty with respect thereto, and is not responsible for any loss or
damage arising from the receipt or use of this e-mail or attachments hereto.

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
From: Peacock, Joshua on
William,

The patched version works great. Thank you for your time and effort.

Volker should I reopen the bug on this?

Thanks

Josh

-----Original Message-----
From: William Jojo [mailto:w.jojo(a)hvcc.edu]
Sent: Thursday, January 14, 2010 2:13 PM
To: Peacock, Joshua
Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
Subject: Re: [Samba] AIX and DFS

Peacock, Joshua wrote:
> I am running 32bit and I would take that version to do some testing
> with.
>
> Will I need to file a bug report for this?
>
>

The new smbd is here:

http://pware.hvcc.edu/download/aix53/joshua/smbd


And if this fixes the problem, I'll file the bug and follow up with
Volker.


Cheers,
Bill


> Thanks
>
> -----Original Message-----
> From: William Jojo [mailto:w.jojo(a)hvcc.edu]
> Sent: Thursday, January 14, 2010 1:45 PM
> To: Peacock, Joshua
> Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
> Subject: Re: [Samba] AIX and DFS
>
> Peacock, Joshua wrote:
>
>> Thanks for all your help. I am using packages from pware.
>>
>> But I downloaded the the source for 3.3.7 and just ran a configure
and
>>
> I
>
>> get the following in the config.log
>>
>> samba_cv_HAVE_BROKEN_READLINK=no
>>
>> Which I thought would need to be set to yes.
>>
>> I don't have access to a ftp/sftp site that I can give you access
too.
>> How would you like me to get you the log file (92k)?
>>
>>
>>
>
> Just following this thread I did some digging and I think readlink is
> working as written. :-)
>
> http://www1.hrz.tu-darmstadt.de/hhlr/doku/sw/apidiffs.html#readlink
>
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.i
> bm.aix.basetechref/doc/basetrf2/symlink.htm
>
> I think we either need to add AIX to the ifdef or properly handle the
> ERANGE. The former looks easier. ;-)
>
> At any rate, Joshua, are you using the 32- or 64-bit version of 3.3.7?
I
>
> have a 32-bit patched smbd replacement you can test with the original
> patch Volker suggested. I can make a 64-bit if you need that.
> Interested?
>
> Cheers,
> Bill
>
>
>
>> This is AIX 6.1
>>
>> Thanks
>>
>> -----Original Message-----
>> From: Volker Lendecke [mailto:Volker.Lendecke(a)SerNet.DE]
>> Sent: Thursday, January 14, 2010 9:48 AM
>> To: Peacock, Joshua
>> Cc: samba(a)lists.samba.org
>> Subject: Re: [Samba] AIX and DFS
>>
>> On Thu, Jan 14, 2010 at 09:05:27AM -0600, Peacock, Joshua wrote:
>>
>>
>>> https://bugzilla.samba.org/show_bug.cgi?id=6330
>>>
>>>
>> Heh, too much going on for my aging brain...
>>
>>
>>
>>> Miguel sent me the following bug report which states its fixed in
>>> 3.3.5
>>>
>>> Does this mean it needs to be compiled with an option to define
>>> HAVE_BROKEN_READLINK?
>>>
>>>
>> It should have figured that out itself if it is indeed fixed in
3.3.5.
>> Can you post your config.log file somewhere?
>>
>> Thanks,
>>
>> Volker
>> This message is intended only for the persons or entities to which it
>>
> is
>
>> addressed. The information transmitted herein may contain proprietary
>>
> or
>
>> confidential material. Review, reproduction, retransmission,
>>
> distribution,
>
>> disclosure or other use, and any consequent action taken by persons
or
>> entities other than intended recipients, are prohibited and may be
>>
> unlawful.
>
>> If you are not the intended recipient, please delete this information
>>
> from
>
>> your system and contact the sender. The information contained herein
>>
> is
>
>> subject to change without notice. Although reasonable precautions
have
>>
> been
>
>> taken to ensure that no viruses are present, the sender makes no
>>
> warranty
>
>> or guaranty with respect thereto, and is not responsible for any loss
>>
> or
>
>> damage arising from the receipt or use of this e-mail or attachments
>>
> hereto.
>
>>
>>
>
> This message is intended only for the persons or entities to which it
is
> addressed. The information transmitted herein may contain proprietary
or
> confidential material. Review, reproduction, retransmission,
distribution,
> disclosure or other use, and any consequent action taken by persons or
> entities other than intended recipients, are prohibited and may be
unlawful.
> If you are not the intended recipient, please delete this information
from
> your system and contact the sender. The information contained herein
is
> subject to change without notice. Although reasonable precautions have
been
> taken to ensure that no viruses are present, the sender makes no
warranty
> or guaranty with respect thereto, and is not responsible for any loss
or
> damage arising from the receipt or use of this e-mail or attachments
hereto.
>
>

This message is intended only for the persons or entities to which it is
addressed. The information transmitted herein may contain proprietary or
confidential material. Review, reproduction, retransmission, distribution,
disclosure or other use, and any consequent action taken by persons or
entities other than intended recipients, are prohibited and may be unlawful.
If you are not the intended recipient, please delete this information from
your system and contact the sender. The information contained herein is
subject to change without notice. Although reasonable precautions have been
taken to ensure that no viruses are present, the sender makes no warranty
or guaranty with respect thereto, and is not responsible for any loss or
damage arising from the receipt or use of this e-mail or attachments hereto.

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
From: Peacock, Joshua on
Sorry I didn't read the last line Bill had posted stating that he would
take care of the bug report.

Thanks again for your help

-----Original Message-----
From: William Jojo [mailto:w.jojo(a)hvcc.edu]
Sent: Thursday, January 14, 2010 2:13 PM
To: Peacock, Joshua
Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
Subject: Re: [Samba] AIX and DFS

Peacock, Joshua wrote:
> I am running 32bit and I would take that version to do some testing
> with.
>
> Will I need to file a bug report for this?
>
>

The new smbd is here:

http://pware.hvcc.edu/download/aix53/joshua/smbd


And if this fixes the problem, I'll file the bug and follow up with
Volker.


Cheers,
Bill


> Thanks
>
> -----Original Message-----
> From: William Jojo [mailto:w.jojo(a)hvcc.edu]
> Sent: Thursday, January 14, 2010 1:45 PM
> To: Peacock, Joshua
> Cc: Volker.Lendecke(a)SerNet.DE; samba(a)lists.samba.org
> Subject: Re: [Samba] AIX and DFS
>
> Peacock, Joshua wrote:
>
>> Thanks for all your help. I am using packages from pware.
>>
>> But I downloaded the the source for 3.3.7 and just ran a configure
and
>>
> I
>
>> get the following in the config.log
>>
>> samba_cv_HAVE_BROKEN_READLINK=no
>>
>> Which I thought would need to be set to yes.
>>
>> I don't have access to a ftp/sftp site that I can give you access
too.
>> How would you like me to get you the log file (92k)?
>>
>>
>>
>
> Just following this thread I did some digging and I think readlink is
> working as written. :-)
>
> http://www1.hrz.tu-darmstadt.de/hhlr/doku/sw/apidiffs.html#readlink
>
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.i
> bm.aix.basetechref/doc/basetrf2/symlink.htm
>
> I think we either need to add AIX to the ifdef or properly handle the
> ERANGE. The former looks easier. ;-)
>
> At any rate, Joshua, are you using the 32- or 64-bit version of 3.3.7?
I
>
> have a 32-bit patched smbd replacement you can test with the original
> patch Volker suggested. I can make a 64-bit if you need that.
> Interested?
>
> Cheers,
> Bill
>
>
>
>> This is AIX 6.1
>>
>> Thanks
>>
>> -----Original Message-----
>> From: Volker Lendecke [mailto:Volker.Lendecke(a)SerNet.DE]
>> Sent: Thursday, January 14, 2010 9:48 AM
>> To: Peacock, Joshua
>> Cc: samba(a)lists.samba.org
>> Subject: Re: [Samba] AIX and DFS
>>
>> On Thu, Jan 14, 2010 at 09:05:27AM -0600, Peacock, Joshua wrote:
>>
>>
>>> https://bugzilla.samba.org/show_bug.cgi?id=6330
>>>
>>>
>> Heh, too much going on for my aging brain...
>>
>>
>>
>>> Miguel sent me the following bug report which states its fixed in
>>> 3.3.5
>>>
>>> Does this mean it needs to be compiled with an option to define
>>> HAVE_BROKEN_READLINK?
>>>
>>>
>> It should have figured that out itself if it is indeed fixed in
3.3.5.
>> Can you post your config.log file somewhere?
>>
>> Thanks,
>>
>> Volker
>> This message is intended only for the persons or entities to which it
>>
> is
>
>> addressed. The information transmitted herein may contain proprietary
>>
> or
>
>> confidential material. Review, reproduction, retransmission,
>>
> distribution,
>
>> disclosure or other use, and any consequent action taken by persons
or
>> entities other than intended recipients, are prohibited and may be
>>
> unlawful.
>
>> If you are not the intended recipient, please delete this information
>>
> from
>
>> your system and contact the sender. The information contained herein
>>
> is
>
>> subject to change without notice. Although reasonable precautions
have
>>
> been
>
>> taken to ensure that no viruses are present, the sender makes no
>>
> warranty
>
>> or guaranty with respect thereto, and is not responsible for any loss
>>
> or
>
>> damage arising from the receipt or use of this e-mail or attachments
>>
> hereto.
>
>>
>>
>
> This message is intended only for the persons or entities to which it
is
> addressed. The information transmitted herein may contain proprietary
or
> confidential material. Review, reproduction, retransmission,
distribution,
> disclosure or other use, and any consequent action taken by persons or
> entities other than intended recipients, are prohibited and may be
unlawful.
> If you are not the intended recipient, please delete this information
from
> your system and contact the sender. The information contained herein
is
> subject to change without notice. Although reasonable precautions have
been
> taken to ensure that no viruses are present, the sender makes no
warranty
> or guaranty with respect thereto, and is not responsible for any loss
or
> damage arising from the receipt or use of this e-mail or attachments
hereto.
>
>

This message is intended only for the persons or entities to which it is
addressed. The information transmitted herein may contain proprietary or
confidential material. Review, reproduction, retransmission, distribution,
disclosure or other use, and any consequent action taken by persons or
entities other than intended recipients, are prohibited and may be unlawful.
If you are not the intended recipient, please delete this information from
your system and contact the sender. The information contained herein is
subject to change without notice. Although reasonable precautions have been
taken to ensure that no viruses are present, the sender makes no warranty
or guaranty with respect thereto, and is not responsible for any loss or
damage arising from the receipt or use of this e-mail or attachments hereto.

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba