Beginner setting up samba: NT_STATUS_LOGON_FAILURE
in [Samba]
|
Prev: [Samba] Beginner setting up samba: NT_STATUS_LOGON_FAILURE
Next: [Samba] Must restart nmbd to connect
From: Daniel Müller on 1 Aug 2010 10:20 On Sat, 31 Jul 2010 23:33:12 +0200, thahn01(a)t-online.de (Thomas Hahn) wrote: > Hello, > I am trying to set up samba on this host and testing it locally > is giving me headaches right away. > > tom(a)hversa:~:~$ smbclient -L localhost -U% > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.4.8] > > Sharename Type Comment > --------- ---- ------- > homes Disk Home Directories > print$ Disk Printer Drivers > IPC$ IPC IPC Service (hversa server) > e250dn Printer Lexmark printer Ksenia > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.4.8] > > Server Comment > --------- ------- > HVERSA hversa server > > Workgroup Master > --------- ------- > DERU_WICO001 OCHENTA > WORKGROUP HVERSA > > So, there is sth. configured, BUT: > > tom(a)hversa:/var/log/samba$ smbclient //hversa/tom -d 3 > lp_load_ex: refreshing parameters > Initialising global parameters > rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) > params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf" > Processing section "[global]" > added interface eth0 ip=fe80::224:1dff:fedc:c0c1%eth0 > bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff:: > added interface eth0 ip=192.168.1.48 bcast=192.168.1.255 > netmask=255.255.255.0 > Client started (version 3.4.8). > Enter tom's password: Hello, did you a smbpasswd -a root? Or are simply the rights wrong for the path:/var/run/samba/ try to chmod or chown. Or set your interfaces in your global section do 127.0.0.1 and your eth0 Greetings Daniel > tdb(unnamed): tdb_open_ex: could not open file > /var/run/samba/gencache.tdb: Permission denied > Connecting to 127.0.0.1 at port 445 > Doing spnego session setup (blob length=58) > got OID=1.3.6.1.4.1.311.2.2.10 > got principal=NONE > Got challenge flags: > Got NTLMSSP neg_flags=0x608a8215 > NTLMSSP: Set final flags: > Got NTLMSSP neg_flags=0x60088215 > NTLMSSP Sign/Seal - Initialising with flags: > Got NTLMSSP neg_flags=0x60088215 > SPNEGO login failed: Logon failure > session setup failed: NT_STATUS_LOGON_FAILURE > > I have googled for the NT_STATUS_LOGON_FAILURE but this didn't help me. > > Any hints please ... > > Thanks Thomas -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
From: Thomas Hahn on 1 Aug 2010 13:40
On Sun, Aug 01, 2010 at 03:53:09PM +0200, Daniel Müller wrote: > On Sat, 31 Jul 2010 23:33:12 +0200, thahn01(a)t-online.de (Thomas Hahn) > wrote: > > Hello, > > I am trying to set up samba on this host and testing it locally > > is giving me headaches right away. > > > > tom(a)hversa:~:~$ smbclient -L localhost -U% > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.4.8] > > > > Sharename Type Comment > > --------- ---- ------- > > homes Disk Home Directories > > print$ Disk Printer Drivers > > IPC$ IPC IPC Service (hversa server) > > e250dn Printer Lexmark printer Ksenia > > Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.4.8] > > > > Server Comment > > --------- ------- > > HVERSA hversa server > > > > Workgroup Master > > --------- ------- > > DERU_WICO001 OCHENTA > > WORKGROUP HVERSA > > > > So, there is sth. configured, BUT: > > > > tom(a)hversa:/var/log/samba$ smbclient //hversa/tom -d 3 > > lp_load_ex: refreshing parameters > > Initialising global parameters > > rlimit_max: rlimit_max (1024) below minimum Windows limit (16384) > > params.c:pm_process() - Processing configuration file > "/etc/samba/smb.conf" > > Processing section "[global]" > > added interface eth0 ip=fe80::224:1dff:fedc:c0c1%eth0 > > bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff:: > > added interface eth0 ip=192.168.1.48 bcast=192.168.1.255 > > netmask=255.255.255.0 > > Client started (version 3.4.8). > > Enter tom's password: > Hello, > > did you a smbpasswd -a root? > Or are simply the rights wrong for the path:/var/run/samba/ > try to chmod or chown. > Or set your interfaces in your global section do 127.0.0.1 and your eth0 > > Greetings > Daniel > After getting these hints, I have done a smbpasswd -a root to find out that samba passwd are not identical to user passwords. smbpasswd tom and try again with smbclient did work. From what I have read, the permissions in the directory are correct: total 416 -rw-r--r-- 1 root root 40200 Aug 1 18:26 brlock.tdb -rw-r--r-- 1 root root 90112 Aug 1 19:29 connections.tdb -rw-r--r-- 1 root root 12288 Aug 1 18:28 gencache.tdb -rw-r--r-- 1 root root 65536 Aug 1 19:29 locking.tdb -rw------- 1 root root 696 Aug 1 18:26 messages.tdb -rw-r--r-- 1 root root 6 Aug 1 18:26 nmbd.pid -rw-r--r-- 1 root root 696 Aug 1 19:26 notify.tdb -rw-r--r-- 1 root root 163840 Aug 1 19:26 sessionid.tdb -rw-r--r-- 1 root root 6 Aug 1 18:26 smbd.pid -rw-r--r-- 1 root root 32768 Aug 1 19:28 unexpected.tdb drwxr-xr-x 2 root root 4096 Jul 20 07:54 upgrades and that /var/run/samba/gencache.tdb cannot be opened is not a real problem. > > tdb(unnamed): tdb_open_ex: could not open file > > /var/run/samba/gencache.tdb: Permission denied > > Connecting to 127.0.0.1 at port 445 > > Doing spnego session setup (blob length=58) > > got OID=1.3.6.1.4.1.311.2.2.10 > > got principal=NONE > > Got challenge flags: > > Got NTLMSSP neg_flags=0x608a8215 > > NTLMSSP: Set final flags: > > Got NTLMSSP neg_flags=0x60088215 > > NTLMSSP Sign/Seal - Initialising with flags: > > Got NTLMSSP neg_flags=0x60088215 > > SPNEGO login failed: Logon failure > > session setup failed: NT_STATUS_LOGON_FAILURE > > > > I have googled for the NT_STATUS_LOGON_FAILURE but this didn't help me. > > > > Any hints please ... > > > > Thanks Thomas What is strange is, that passwd in /etc/passwd and the one's for samba are not synchronized, which I expected to be natural looking at my /etc/samba/smb.conf of that debian box: .... ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. encrypt passwords = true # If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam obey pam restrictions = yes # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. unix password sync = yes # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<kahan(a)informatik.tu-muenchen.de> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes .... I am happy I can use it now. Thomas > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba |