From: Amin on
Hi i have a network of five pcs which students distructed and i have changed
the hub and all the ethernet cables, now some of the pcs are working but the
other two wont connect because the cables are not detected. i notice so by
looking at the lights of the corresponding port. what do i need to do to get
the ethernet detected so the pcs will have internet thanks. thats is all xp
computers
From: Jack [MVP-Networking] on
Hi
You have to physically check all the cables to see if they are connected as
they should.
You might need to check computer by computer, plug and unplug, and put
stickers on the cables so you know what belongs to what, and what is working
and what is Not working.
When you done lock the switch/hub in a ventilated cabinet.
If the cables looks OK and you want to check the Computer's network
configuration.
http://www.ezlan.net/debug.html
Jack (MS, MVP-Networking).


"Amin" <Amin(a)discussions.microsoft.com> wrote in message
news:5FF12DC0-DAD5-4F80-BCA1-2ABF00D3256E(a)microsoft.com...
> Hi i have a network of five pcs which students distructed and i have
> changed
> the hub and all the ethernet cables, now some of the pcs are working but
> the
> other two wont connect because the cables are not detected. i notice so by
> looking at the lights of the corresponding port. what do i need to do to
> get
> the ethernet detected so the pcs will have internet thanks. thats is all
> xp
> computers

From: EN59CVH on

If you tampered with Network Interface Cards in the box itself then
perhaps are not fitted properly. Worth checking them again.

hth


Amin wrote:

>Hi i have a network of five pcs which students distructed and i have changed
>the hub and all the ethernet cables, now some of the pcs are working but the
>other two wont connect because the cables are not detected. i notice so by
>looking at the lights of the corresponding port. what do i need to do to get
>the ethernet detected so the pcs will have internet thanks. thats is all xp
>computers
>
>