Domain Trusts with Samba 3.0.33 and 3.3.12 ????
in [Samba]
|
From: Gaiseric Vandal on 14 Jun 2010 11:50 lanman and plaintext auth should only be needed if you are support Windows 95/98 machines. NT 4 with SP6 should not require this. So I would first disable lanman and plaintext on Domain A, and make sure it has not broken authentication with your NT4 machine. On 06/14/2010 11:39 AM, Wikked one wrote: > There are some differences when I run testparm -v. > PDC for Domain A > lanman auth=Yes > ntlm auth=Yes > client NTMLv2=No > client lanman auth=Yes > client plaintext auth=Yes > > PDC for Domain B > lanman auth=No > ntlm auth=Yes > client NTMLv2=No > client lanman auth=No > client plaintext auth=No > > > > > > From: gaiseric.vandal(a)gmail.com > > To: samba(a)lists.samba.org > > Date: Sun, 13 Jun 2010 21:31:58 -0400 > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > If you run "testparm -v" on each, are the encryption parameters > (NTLM etc) > > the same? > > > > > > > > From: Wikked one [mailto:wikked1(a)hotmail.com] > > Sent: Sunday, June 13, 2010 7:56 AM > > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > > Subject: RE: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > LDAP backend. > > I am 100% sure about the passwords since I set them up just previous > to the > > process. > > The short answer to upgrading domain A is no,and the log files do not > > indicate anything. > > I will increase the log level when I resume testing tomorrow. > > The long answer to upgrading is this: Since we are looking towards > Windows 7 > > workstation deployment,we > > realize we need to use Samba 3.3 ,our existing domain (Samba 3.0.33) > has NT4 > > workstations and legacy Netbios system names that we do not want to > carry > > forward. So the solution I am hoping to implement is a new Samba 3.3 > domain > > with a new domain name and SID that supports windows 7 (got that > working) > > but also has a two way domain trust established. This would allow > > incremental deployment rather than a hard cut over. > > Thanks! > > > > > From: gaiseric.vandal(a)gmail.com > > > To: samba(a)lists.samba.org > > > Date: Sat, 12 Jun 2010 17:15:59 -0400 > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > What is the backend? > > > > > > In domain A, you should have a user account for domain B (so that > A can be > > > trusted by B.) And vice versa. The passwords created for those > accounts > > > should be the passwords used when establishing trusts. So you > should be > > > 100% certain about those passwords. > > > > > > Any chance you can upgrade DomainA to samba 3.3.12? Do the log > files show > > > anything (maybe the wrong encryption levels for authenticating > passwords?) > > > > > > > > > > > > -----Original Message----- > > > From: samba-bounces(a)lists.samba.org > [mailto:samba-bounces(a)lists.samba.org] > > > On Behalf Of Wikked one > > > Sent: Friday, June 11, 2010 5:05 AM > > > To: samba(a)lists.samba.org > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > > > > > From: wikked1(a)hotmail.com > > > > To: samba(a)lists.samba.org > > > > Date: Wed, 9 Jun 2010 18:30:19 +0000 > > > > Subject: [Samba] Domain Trusts > > > > > > > > > > > > Anybody? > > > > > > > > > Greetings List, > > > > > > > > > > I've > > > > > been attempting to establish a two way domain trust between Samba > > > Domains. The reasons why are numerous but mainly so > > > > > that our Samba PDC supports Window7. > > > > > Domain A is Samba 3.0.33 and domain B is Samba 3.3.12 and I've > > > > > established that domain B trusts domain A without > issue,however when I > > > attempt > > > > > to trust domain B on domain A, I get the following error. > "Could not > > > connect to > > > > > server DomainA PDC. Storing password for trusted domain failed." > > > > > > > > > > I'm certain the password is correct. > > > > > > > > > > > > > > > _________________________________________________________________ > > > > > Hotmail is redefining busy with tools for the New Busy. Get > more from > > > your inbox. > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > L:en-US:WM_HMP:042010_2 > > > > > -- > > > > > To unsubscribe from this list go to the following URL and read the > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > _________________________________________________________________ > > > > Hotmail is redefining busy with tools for the New Busy. Get more > from > > your > > > inbox. > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > L:en-US:WM_HMP:042010_2 > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > _________________________________________________________________ > > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > inbox. > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > L:en-US:WM_HMP:042010_1 > > > -- > > > To unsubscribe from this list go to the following URL and read the > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > -- > > > To unsubscribe from this list go to the following URL and read the > > > instructions: https://lists.samba.org/mailman/options/samba > > > > _____ > > > > The New Busy is not the old busy. Search, chat and e-mail from your > inbox. > > Get started. > > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON: > > WL:en-US:WM_HMP:042010_3> > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: https://lists.samba.org/mailman/options/samba > > ------------------------------------------------------------------------ > Hotmail has tools for the New Busy. Search, chat and e-mail from your > inbox. Learn more. > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1> -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
From: Wikked one on 14 Jun 2010 12:50 I have set those parameters as you suggested without NT4 problems. This has had no effect on the trust relationship, I still get the same message. I can submit a log file from DomainA,if it would help? > Date: Mon, 14 Jun 2010 11:45:29 -0400 > From: gaiseric.vandal(a)gmail.com > To: samba(a)lists.samba.org > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > lanman and plaintext auth should only be needed if you are support > Windows 95/98 machines. NT 4 with SP6 should not require this. So > I would first disable lanman and plaintext on Domain A, and make sure it > has not broken authentication with your NT4 machine. > > > > On 06/14/2010 11:39 AM, Wikked one wrote: > > There are some differences when I run testparm -v. > > PDC for Domain A > > lanman auth=Yes > > ntlm auth=Yes > > client NTMLv2=No > > client lanman auth=Yes > > client plaintext auth=Yes > > > > PDC for Domain B > > lanman auth=No > > ntlm auth=Yes > > client NTMLv2=No > > client lanman auth=No > > client plaintext auth=No > > > > > > > > > > > From: gaiseric.vandal(a)gmail.com > > > To: samba(a)lists.samba.org > > > Date: Sun, 13 Jun 2010 21:31:58 -0400 > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > If you run "testparm -v" on each, are the encryption parameters > > (NTLM etc) > > > the same? > > > > > > > > > > > > From: Wikked one [mailto:wikked1(a)hotmail.com] > > > Sent: Sunday, June 13, 2010 7:56 AM > > > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > > > Subject: RE: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > LDAP backend. > > > I am 100% sure about the passwords since I set them up just previous > > to the > > > process. > > > The short answer to upgrading domain A is no,and the log files do not > > > indicate anything. > > > I will increase the log level when I resume testing tomorrow. > > > The long answer to upgrading is this: Since we are looking towards > > Windows 7 > > > workstation deployment,we > > > realize we need to use Samba 3.3 ,our existing domain (Samba 3.0.33) > > has NT4 > > > workstations and legacy Netbios system names that we do not want to > > carry > > > forward. So the solution I am hoping to implement is a new Samba 3.3 > > domain > > > with a new domain name and SID that supports windows 7 (got that > > working) > > > but also has a two way domain trust established. This would allow > > > incremental deployment rather than a hard cut over. > > > Thanks! > > > > > > > From: gaiseric.vandal(a)gmail.com > > > > To: samba(a)lists.samba.org > > > > Date: Sat, 12 Jun 2010 17:15:59 -0400 > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > What is the backend? > > > > > > > > In domain A, you should have a user account for domain B (so that > > A can be > > > > trusted by B.) And vice versa. The passwords created for those > > accounts > > > > should be the passwords used when establishing trusts. So you > > should be > > > > 100% certain about those passwords. > > > > > > > > Any chance you can upgrade DomainA to samba 3.3.12? Do the log > > files show > > > > anything (maybe the wrong encryption levels for authenticating > > passwords?) > > > > > > > > > > > > > > > > -----Original Message----- > > > > From: samba-bounces(a)lists.samba.org > > [mailto:samba-bounces(a)lists.samba.org] > > > > On Behalf Of Wikked one > > > > Sent: Friday, June 11, 2010 5:05 AM > > > > To: samba(a)lists.samba.org > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > > > > > > > > > > From: wikked1(a)hotmail.com > > > > > To: samba(a)lists.samba.org > > > > > Date: Wed, 9 Jun 2010 18:30:19 +0000 > > > > > Subject: [Samba] Domain Trusts > > > > > > > > > > > > > > > Anybody? > > > > > > > > > > > Greetings List, > > > > > > > > > > > > I've > > > > > > been attempting to establish a two way domain trust between Samba > > > > Domains. The reasons why are numerous but mainly so > > > > > > that our Samba PDC supports Window7. > > > > > > Domain A is Samba 3.0.33 and domain B is Samba 3.3.12 and I've > > > > > > established that domain B trusts domain A without > > issue,however when I > > > > attempt > > > > > > to trust domain B on domain A, I get the following error. > > "Could not > > > > connect to > > > > > > server DomainA PDC. Storing password for trusted domain failed." > > > > > > > > > > > > I'm certain the password is correct. > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > > > > > Hotmail is redefining busy with tools for the New Busy. Get > > more from > > > > your inbox. > > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > L:en-US:WM_HMP:042010_2 > > > > > > -- > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > _________________________________________________________________ > > > > > Hotmail is redefining busy with tools for the New Busy. Get more > > from > > > your > > > > inbox. > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > L:en-US:WM_HMP:042010_2 > > > > > -- > > > > > To unsubscribe from this list go to the following URL and read the > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > _________________________________________________________________ > > > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > > inbox. > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > L:en-US:WM_HMP:042010_1 > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > _____ > > > > > > The New Busy is not the old busy. Search, chat and e-mail from your > > inbox. > > > Get started. > > > > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON: > > > WL:en-US:WM_HMP:042010_3> > > > > > > -- > > > To unsubscribe from this list go to the following URL and read the > > > instructions: https://lists.samba.org/mailman/options/samba > > > > ------------------------------------------------------------------------ > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > inbox. Learn more. > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1> > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba _________________________________________________________________ The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3 -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
From: Wikked one on 15 Jun 2010 12:10 Log file from PDC Domain A attached. Any suggestions?? > From: wikked1(a)hotmail.com > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > Date: Mon, 14 Jun 2010 16:47:28 +0000 > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > I have set those parameters as you suggested without NT4 problems. > This has had no effect on the trust relationship, I still get the same message. > I can submit a log file from DomainA,if it would help? > > > Date: Mon, 14 Jun 2010 11:45:29 -0400 > > From: gaiseric.vandal(a)gmail.com > > To: samba(a)lists.samba.org > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > lanman and plaintext auth should only be needed if you are support > > Windows 95/98 machines. NT 4 with SP6 should not require this. So > > I would first disable lanman and plaintext on Domain A, and make sure it > > has not broken authentication with your NT4 machine. > > > > > > > > On 06/14/2010 11:39 AM, Wikked one wrote: > > > There are some differences when I run testparm -v. > > > PDC for Domain A > > > lanman auth=Yes > > > ntlm auth=Yes > > > client NTMLv2=No > > > client lanman auth=Yes > > > client plaintext auth=Yes > > > > > > PDC for Domain B > > > lanman auth=No > > > ntlm auth=Yes > > > client NTMLv2=No > > > client lanman auth=No > > > client plaintext auth=No > > > > > > > > > > > > > > > > From: gaiseric.vandal(a)gmail.com > > > > To: samba(a)lists.samba.org > > > > Date: Sun, 13 Jun 2010 21:31:58 -0400 > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > If you run "testparm -v" on each, are the encryption parameters > > > (NTLM etc) > > > > the same? > > > > > > > > > > > > > > > > From: Wikked one [mailto:wikked1(a)hotmail.com] > > > > Sent: Sunday, June 13, 2010 7:56 AM > > > > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > > > > Subject: RE: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > > > > > LDAP backend. > > > > I am 100% sure about the passwords since I set them up just previous > > > to the > > > > process. > > > > The short answer to upgrading domain A is no,and the log files do not > > > > indicate anything. > > > > I will increase the log level when I resume testing tomorrow. > > > > The long answer to upgrading is this: Since we are looking towards > > > Windows 7 > > > > workstation deployment,we > > > > realize we need to use Samba 3.3 ,our existing domain (Samba 3.0.33) > > > has NT4 > > > > workstations and legacy Netbios system names that we do not want to > > > carry > > > > forward. So the solution I am hoping to implement is a new Samba 3.3 > > > domain > > > > with a new domain name and SID that supports windows 7 (got that > > > working) > > > > but also has a two way domain trust established. This would allow > > > > incremental deployment rather than a hard cut over. > > > > Thanks! > > > > > > > > > From: gaiseric.vandal(a)gmail.com > > > > > To: samba(a)lists.samba.org > > > > > Date: Sat, 12 Jun 2010 17:15:59 -0400 > > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > What is the backend? > > > > > > > > > > In domain A, you should have a user account for domain B (so that > > > A can be > > > > > trusted by B.) And vice versa. The passwords created for those > > > accounts > > > > > should be the passwords used when establishing trusts. So you > > > should be > > > > > 100% certain about those passwords. > > > > > > > > > > Any chance you can upgrade DomainA to samba 3.3.12? Do the log > > > files show > > > > > anything (maybe the wrong encryption levels for authenticating > > > passwords?) > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: samba-bounces(a)lists.samba.org > > > [mailto:samba-bounces(a)lists.samba.org] > > > > > On Behalf Of Wikked one > > > > > Sent: Friday, June 11, 2010 5:05 AM > > > > > To: samba(a)lists.samba.org > > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > > > > > > > > > > > > > > > From: wikked1(a)hotmail.com > > > > > > To: samba(a)lists.samba.org > > > > > > Date: Wed, 9 Jun 2010 18:30:19 +0000 > > > > > > Subject: [Samba] Domain Trusts > > > > > > > > > > > > > > > > > > Anybody? > > > > > > > > > > > > > Greetings List, > > > > > > > > > > > > > > I've > > > > > > > been attempting to establish a two way domain trust between Samba > > > > > Domains. The reasons why are numerous but mainly so > > > > > > > that our Samba PDC supports Window7. > > > > > > > Domain A is Samba 3.0.33 and domain B is Samba 3.3.12 and I've > > > > > > > established that domain B trusts domain A without > > > issue,however when I > > > > > attempt > > > > > > > to trust domain B on domain A, I get the following error. > > > "Could not > > > > > connect to > > > > > > > server DomainA PDC. Storing password for trusted domain failed." > > > > > > > > > > > > > > I'm certain the password is correct. > > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > > > > > > Hotmail is redefining busy with tools for the New Busy. Get > > > more from > > > > > your inbox. > > > > > > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > > L:en-US:WM_HMP:042010_2 > > > > > > > -- > > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > > > _________________________________________________________________ > > > > > > Hotmail is redefining busy with tools for the New Busy. Get more > > > from > > > > your > > > > > inbox. > > > > > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > > L:en-US:WM_HMP:042010_2 > > > > > > -- > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > _________________________________________________________________ > > > > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > > > inbox. > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > > L:en-US:WM_HMP:042010_1 > > > > > -- > > > > > To unsubscribe from this list go to the following URL and read the > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > -- > > > > > To unsubscribe from this list go to the following URL and read the > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > _____ > > > > > > > > The New Busy is not the old busy. Search, chat and e-mail from your > > > inbox. > > > > Get started. > > > > > > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON: > > > > WL:en-US:WM_HMP:042010_3> > > > > > > > > -- > > > > To unsubscribe from this list go to the following URL and read the > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > ------------------------------------------------------------------------ > > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > > inbox. Learn more. > > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1> > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: https://lists.samba.org/mailman/options/samba > > _________________________________________________________________ > The New Busy is not the old busy. Search, chat and e-mail from your inbox. > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3 > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba _________________________________________________________________ The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
From: Wikked one on 16 Jun 2010 12:00 I'm still hoping for hints,suggestions,this should work shouldn't it? > From: wikked1(a)hotmail.com > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > Date: Tue, 15 Jun 2010 16:02:47 +0000 > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > Log file from PDC Domain A attached. > Any suggestions?? > > > From: wikked1(a)hotmail.com > > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > > Date: Mon, 14 Jun 2010 16:47:28 +0000 > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > I have set those parameters as you suggested without NT4 problems. > > This has had no effect on the trust relationship, I still get the same message. > > I can submit a log file from DomainA,if it would help? > > > > > Date: Mon, 14 Jun 2010 11:45:29 -0400 > > > From: gaiseric.vandal(a)gmail.com > > > To: samba(a)lists.samba.org > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > lanman and plaintext auth should only be needed if you are support > > > Windows 95/98 machines. NT 4 with SP6 should not require this. So > > > I would first disable lanman and plaintext on Domain A, and make sure it > > > has not broken authentication with your NT4 machine. > > > > > > > > > > > > On 06/14/2010 11:39 AM, Wikked one wrote: > > > > There are some differences when I run testparm -v. > > > > PDC for Domain A > > > > lanman auth=Yes > > > > ntlm auth=Yes > > > > client NTMLv2=No > > > > client lanman auth=Yes > > > > client plaintext auth=Yes > > > > > > > > PDC for Domain B > > > > lanman auth=No > > > > ntlm auth=Yes > > > > client NTMLv2=No > > > > client lanman auth=No > > > > client plaintext auth=No > > > > > > > > > > > > > > > > > > > > > From: gaiseric.vandal(a)gmail.com > > > > > To: samba(a)lists.samba.org > > > > > Date: Sun, 13 Jun 2010 21:31:58 -0400 > > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > If you run "testparm -v" on each, are the encryption parameters > > > > (NTLM etc) > > > > > the same? > > > > > > > > > > > > > > > > > > > > From: Wikked one [mailto:wikked1(a)hotmail.com] > > > > > Sent: Sunday, June 13, 2010 7:56 AM > > > > > To: gaiseric.vandal(a)gmail.com; samba(a)lists.samba.org > > > > > Subject: RE: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > > > > > > > > > LDAP backend. > > > > > I am 100% sure about the passwords since I set them up just previous > > > > to the > > > > > process. > > > > > The short answer to upgrading domain A is no,and the log files do not > > > > > indicate anything. > > > > > I will increase the log level when I resume testing tomorrow. > > > > > The long answer to upgrading is this: Since we are looking towards > > > > Windows 7 > > > > > workstation deployment,we > > > > > realize we need to use Samba 3.3 ,our existing domain (Samba 3.0.33) > > > > has NT4 > > > > > workstations and legacy Netbios system names that we do not want to > > > > carry > > > > > forward. So the solution I am hoping to implement is a new Samba 3.3 > > > > domain > > > > > with a new domain name and SID that supports windows 7 (got that > > > > working) > > > > > but also has a two way domain trust established. This would allow > > > > > incremental deployment rather than a hard cut over. > > > > > Thanks! > > > > > > > > > > > From: gaiseric.vandal(a)gmail.com > > > > > > To: samba(a)lists.samba.org > > > > > > Date: Sat, 12 Jun 2010 17:15:59 -0400 > > > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > What is the backend? > > > > > > > > > > > > In domain A, you should have a user account for domain B (so that > > > > A can be > > > > > > trusted by B.) And vice versa. The passwords created for those > > > > accounts > > > > > > should be the passwords used when establishing trusts. So you > > > > should be > > > > > > 100% certain about those passwords. > > > > > > > > > > > > Any chance you can upgrade DomainA to samba 3.3.12? Do the log > > > > files show > > > > > > anything (maybe the wrong encryption levels for authenticating > > > > passwords?) > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: samba-bounces(a)lists.samba.org > > > > [mailto:samba-bounces(a)lists.samba.org] > > > > > > On Behalf Of Wikked one > > > > > > Sent: Friday, June 11, 2010 5:05 AM > > > > > > To: samba(a)lists.samba.org > > > > > > Subject: Re: [Samba] Domain Trusts with Samba 3.0.33 and 3.3.12 ???? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > From: wikked1(a)hotmail.com > > > > > > > To: samba(a)lists.samba.org > > > > > > > Date: Wed, 9 Jun 2010 18:30:19 +0000 > > > > > > > Subject: [Samba] Domain Trusts > > > > > > > > > > > > > > > > > > > > > Anybody? > > > > > > > > > > > > > > > Greetings List, > > > > > > > > > > > > > > > > I've > > > > > > > > been attempting to establish a two way domain trust between Samba > > > > > > Domains. The reasons why are numerous but mainly so > > > > > > > > that our Samba PDC supports Window7. > > > > > > > > Domain A is Samba 3.0.33 and domain B is Samba 3.3.12 and I've > > > > > > > > established that domain B trusts domain A without > > > > issue,however when I > > > > > > attempt > > > > > > > > to trust domain B on domain A, I get the following error. > > > > "Could not > > > > > > connect to > > > > > > > > server DomainA PDC. Storing password for trusted domain failed." > > > > > > > > > > > > > > > > I'm certain the password is correct. > > > > > > > > > > > > > > > > > > > > > > > > _________________________________________________________________ > > > > > > > > Hotmail is redefining busy with tools for the New Busy. Get > > > > more from > > > > > > your inbox. > > > > > > > > > > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > > > L:en-US:WM_HMP:042010_2 > > > > > > > > -- > > > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > > > > > _________________________________________________________________ > > > > > > > Hotmail is redefining busy with tools for the New Busy. Get more > > > > from > > > > > your > > > > > > inbox. > > > > > > > > > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > > > L:en-US:WM_HMP:042010_2 > > > > > > > -- > > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > > > _________________________________________________________________ > > > > > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > > > > inbox. > > > > > > > > > > > > > > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:W > > > > > > L:en-US:WM_HMP:042010_1 > > > > > > -- > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > > > -- > > > > > > To unsubscribe from this list go to the following URL and read the > > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > > > _____ > > > > > > > > > > The New Busy is not the old busy. Search, chat and e-mail from your > > > > inbox. > > > > > Get started. > > > > > > > > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON: > > > > > WL:en-US:WM_HMP:042010_3> > > > > > > > > > > -- > > > > > To unsubscribe from this list go to the following URL and read the > > > > > instructions: https://lists.samba.org/mailman/options/samba > > > > > > > > ------------------------------------------------------------------------ > > > > Hotmail has tools for the New Busy. Search, chat and e-mail from your > > > > inbox. Learn more. > > > > <http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_1> > > > > > > -- > > > To unsubscribe from this list go to the following URL and read the > > > instructions: https://lists.samba.org/mailman/options/samba > > > > _________________________________________________________________ > > The New Busy is not the old busy. Search, chat and e-mail from your inbox. > > http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3 > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: https://lists.samba.org/mailman/options/samba > > _________________________________________________________________ > The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail. > http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4 _________________________________________________________________ The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3 -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
First
|
Prev
|
Pages: 1 2 Prev: Peculiar Samba permission denied error Next: [Samba] hardlink unlink-before-save? |