Prev: TSKROOT 1061
Next: HP 7210 fax error
From: nickthurg28 on 18 Dec 2006 11:23
Has anyone come across "49.4C03 Service Error" on a HP 4100?

From: housetrained on 18 Dec 2006 11:59
<nickthurg28(a)yahoo.co.uk> wrote in message
news:1166459025.796089.179210(a)79g2000cws.googlegroups.com...
> Has anyone come across "49.4C03 Service Error" on a HP 4100?
>

Not personally but
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpl06726
might help you

--
John the West Ham fan
housetrained(a)hotmail.com
<><


From: Tony on 18 Dec 2006 13:46
nickthurg28(a)yahoo.co.uk wrote:
>Has anyone come across "49.4C03 Service Error" on a HP 4100?

It's a Firmware error. If the problem occurs from only one application then the
application is at fault.
Otherwise, disconnect the printer from the PC, power the printer off.
Remove all of the DIMM's except the Firmware DIMM in the lowest slot, remove
the EIO card if installed. Power back on.
If the problem has gone, reinstall the DIMM's etc one at a time until the
problem returns. Make sure power is off while plugging the components back into
the printer.
If removing the DIMM's does not fix the problem the printer has a failed
Firmware DIMM or Formatter.
Tony
MS MVP Printing/Imaging

 | 
Pages: 1
Prev: TSKROOT 1061
Next: HP 7210 fax error