KB955759 installs fine, but is re-detected for installation
in [Windows Update]
|
From: Aaron D. Priest Aaron D. on 5 Jan 2010 15:17 Microsoft Update keeps saying one of our XP Pro SP3 machines needs KB955759 installed. It installs successfully with no errors, but several minutes after a reboot, the yellow alert is back to install it again. I've manually downloaded the .exe and installed it with no errors as well. I've run MicrosoftFixit50202.msi in normal and aggressive modes with no resolution. Any tips?!
From: MowGreen on 5 Jan 2010 15:30 Aaron D. Priest wrote: > Microsoft Update keeps saying one of our XP Pro SP3 machines needs KB955759 > installed. It installs successfully with no errors, but several minutes after > a reboot, the yellow alert is back to install it again. I've manually > downloaded the .exe and installed it with no errors as well. I've run > MicrosoftFixit50202.msi in normal and aggressive modes with no resolution. > Any tips?! Aaron, First try a clean boot of XP and see if the *manually* downloaded update can install: http://support.microsoft.com/kb/310353 If no joy, please post the KB955759.log, located in WINDOWS. MowGreen =============== *-343-* FDNY Never Forgotten =============== banthecheck.com "Security updates should *never* have *non-security content* prechecked"
From: PA Bear [MS MVP] on 5 Jan 2010 19:43 Hide the d*** update. While it's security-related, it is NOT a criticial security update. Instead of installing KB955759, just run the "unregister" Fix It here: http://support.microsoft.com/kb/954157 Aaron D. Priest wrote: > Microsoft Update keeps saying one of our XP Pro SP3 machines needs > KB955759 > installed. It installs successfully with no errors, but several minutes > after a reboot, the yellow alert is back to install it again. I've > manually > downloaded the .exe and installed it with no errors as well. I've run > MicrosoftFixit50202.msi in normal and aggressive modes with no resolution. > Any tips?!
From: Aaron D. Priest on 6 Jan 2010 11:19 Tried the clean boot tip, good idea, but didn't resolve it. I have K-Lite installed if that matters. Here are the contents of KB955759.log: [KB955759.log] 10.157: ================================================================================ 10.157: 2010/01/06 11:14:33.796 (local) 10.157: C:\WINDOWS\SoftwareDistribution\Download\da7fee2d51e2e59bdd47cb9e03387bcc\update\update.exe (version 6.3.13.0) 10.157: Failed To Enable SE_SHUTDOWN_PRIVILEGE 10.157: Hotfix started with following command line: -q -z -er /ParentInfo:4c761219d5f5b5498e2c4140abbca21b 10.172: In Function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2 11.985: In Function TestVolatileFlag, line 11825, RegOpenKeyEx failed with error 0x2 11.985: In Function TestVolatileFlag, line 11857, RegOpenKeyEx failed with error 0x2 11.985: DoInstallation: CleanPFR failed: 0x2 11.985: In Function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2 11.985: SetProductTypes: InfProductBuildType=BuildType.IP 12.000: SetAltOsLoaderPath: No section uses DirId 65701; done. 12.032: DoInstallation: FetchSourceURL for c:\windows\softwaredistribution\download\da7fee2d51e2e59bdd47cb9e03387bcc\update\update_SP3GDR.inf failed 12.032: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102 12.047: CreateUninstall = 0,Directory = C:\WINDOWS\$NtUninstallKB955759$ 12.078: BuildCabinetManifest: update.url absent 12.078: Starting AnalyzeComponents 12.078: AnalyzePhaseZero used 0 ticks 12.078: No c:\windows\INF\updtblk.inf file. 12.094: OEM file scan used 16 ticks 12.313: AnalyzePhaseOne: used 235 ticks 12.313: AnalyzeComponents: Hotpatch analysis disabled; skipping. 12.313: AnalyzeComponents: Hotpatching is disabled. 12.313: FindFirstFile c:\windows\$hf_mig$\*.* 12.313: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target file c:\windows\apppatch\aclayers.dll has branch sp3qfe which is greater than branch for sp3gdr 12.328: AnalyzeForBranching: g_bRepeatInventory set to TRUE because target file c:\windows\system32\dllcache\aclayers.dll has branch sp3qfe which is greater than branch for sp3gdr 12.328: AnalyzeForBranching used 15 ticks. 12.328: AnalyzeComponents: Branch sp3gdr is not applicable to target workstation 12.328: AnalyzeComponents used 250 ticks 12.750: Inventory complete: ReturnStatus=61675, 718 ticks 12.750: Num Ticks for invent : 718 12.750: DoInstallation: Re-running Inventory. 12.750: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102 12.750: BuildCabinetManifest: update.url absent 12.750: Starting AnalyzeComponents 12.750: AnalyzePhaseZero used 0 ticks 12.750: No c:\windows\INF\updtblk.inf file. 12.750: OEM file scan used 0 ticks 12.782: AnalyzePhaseOne: used 32 ticks 12.782: AnalyzeComponents: Hotpatch analysis disabled; skipping. 12.782: AnalyzeComponents: Hotpatching is disabled. 12.782: FindFirstFile c:\windows\$hf_mig$\*.* 12.782: AnalyzeForBranching used 0 ticks. 12.782: AnalyzePhaseTwo used 0 ticks 12.782: AnalyzePhaseThree used 0 ticks 12.782: AnalyzePhaseFive used 0 ticks 12.797: AnalyzePhaseSix used 15 ticks 12.797: AnalyzeComponents used 47 ticks 12.797: Downloading 0 files 12.797: bPatchMode = FALSE 12.797: Inventory complete: ReturnStatus=0, 47 ticks 12.797: Num Ticks for invent : 47 12.828: VerifyTargetFileSize: Unable to verify size as Source = NULL for file c:\windows\inf\HFXA.tmp 12.828: Copied file: c:\windows\inf\branches.inf 12.828: Allocation size of drive C: is 4096 bytes, free space = 283229437952 bytes 12.828: Drive C: free 270108MB req: 5MB w/uninstall 0MB 12.828: CabinetBuild complete 12.828: Num Ticks for Cabinet build : 31 12.828: DynamicStrings section not defined or empty. 12.828: FileInUse:: Detection disabled. 13.828: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 0xe0000102 13.844: System Restore Point set. 13.922: Copied file: C:\WINDOWS\system32\spmsg.dll 14.032: PFE2: Not avoiding Per File Exceptions. 14.125: DoInstallation: Installing assemblies with source root path: c:\windows\softwaredistribution\download\da7fee2d51e2e59bdd47cb9e03387bcc\ 14.125: Num Ticks for Copying files : 1297 14.125: Num Ticks for Reg update and deleting 0 size files : 0 14.125: Starting process: rundll32.exe apphelp.dll,ShimFlushCache 14.203: Return Code = 0 14.235: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is empty; nothing to do. 14.250: RebootNecessary = 0,WizardInput = 1 , DontReboot = 1, ForceRestart = 0
From: Aaron D. Priest on 6 Jan 2010 11:34
I ran MicrosoftFixit50326.msi and also removed any Indeo codecs that K-Lite installed, but I'm still getting the same update notification. I finally just told it not to notify me again on the two machines that now doing this so it won't hassle the users, though that's a little unsettling to me. I'd rather find the root cause why it keeps re-detecting. |