Prev: percpu for v2.6.32
Next: uml: Remove unused variable from line driver
From: Vegard Nossum on 20 Apr 2010 04:10
On 19 April 2010 15:23, naveen yadav <yad.naveen(a)gmail.com> wrote:
> Hi,
>
> á á á I áam átrying to á run áKmemcheck on á a áCortex ( ARM-v7)
> board árunning áLinux 2.6.30.9
>
> At boot-up time, áas ásoon áas áTimer-device is áenabled, á I áfind
> that á timer ágets ádisabled ábecause ásystem
> gets spurious áinterrupts áon áthat áirq áline.
>
>
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Linux System timer initialize
> irq 23: nobody cared (try booting with the "irqpoll" option)
> [<c002e148>] (unwind_backtrace+0x0/0xe8) from [<c002c4b8>]
> (dump_stack+0x18/0x1c)
> [<c002c4b8>] (dump_stack+0x18/0x1c) from [<c006ad74>]
> (__report_bad_irq+0x80/0xb0)
> [<c006ad74>] (__report_bad_irq+0x80/0xb0) from [<c006af28>]
> (note_interrupt+0x184/0x1f0)
> [<c006af28>] (note_interrupt+0x184/0x1f0) from [<c006ba38>]
> (handle_edge_irq+0xe8/0x160)
> [<c006ba38>] (handle_edge_irq+0xe8/0x160) from [<c0027060>]
> (asm_do_IRQ+0x60/0x74)
> [<c0027060>] (asm_do_IRQ+0x60/0x74) from [<c0027a30>] (__irq_svc+0x30/0x80)
> Exception stack(0xc0373ec0 to 0xc0373f08)
> 3ec0: 00000017 c0372000 00000002 00000000 00000002 c038e8f4 00000000 0aa00000
> 3ee0: c0372000 c03bfc40 0000001f c0373f44 00000100 c0373f08 c0047ffc c0047c98
> 3f00: 20000153 ffffffff
> [<c0027a30>] (__irq_svc+0x30/0x80) from [<c0047ffc>] (irq_exit+0x44/0x4c)
> [<c0047ffc>] (irq_exit+0x44/0x4c) from [<c0047ffc>] (irq_exit+0x44/0x4c)
> [<c0047ffc>] (irq_exit+0x44/0x4c) from [<c0027064>] (asm_do_IRQ+0x64/0x74)
> [<c0027064>] (asm_do_IRQ+0x64/0x74) from [<c0027a30>] (__irq_svc+0x30/0x80)
> Exception stack(0xc0373f78 to 0xc0373fc0)
> 3f60: á á á á á á á á á á á á á á á á á á á á á á á á á á á 00000000 c037c15c
> 3f80: 00000001 600001d3 955fffff c00242ec c0399f80 0aa00000 c0023000 412fc082
> 3fa0: 0000001f c0373ff4 c0373fc0 c0373fc0 c0008974 c0019798 20000153 ffffffff
> [<c0027a30>] (__irq_svc+0x30/0x80) from [<c0008974>] (start_kernel+0x168/0x3e4)
> [<c0008974>] (start_kernel+0x168/0x3e4) from [<60008034>] (0x60008034)
> handlers:
> [<c003a604>] (sdp_timer_interrupt+0x0/0x38)
> Disabling IRQ #23
> Console: colour dummy device 80x30
> console [ttyS1] enabled
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>
>
> Later, áwhen ácalibrating delay áloop, áthe system is hung áas timer
> is not working.
>
> The problem happens áeven if áI áset kmemcheck_enabled = 0 at áboot.
> ( I also commented out á á pagetable_init(&meminfo) á).
>
> áIf áyou have seen this before, áplease let me know.
>
> ( I know that áyour patch was written for á ARM v6. á á My cpu is
> Cortex . á áI am aware that áI may have to make some change in the
> áinstruction simulation handling. )
>
> Thanks

Hi,

First up, I see a lot of funny á characters in your text.

I think that this is not about kmemcheck, but kmemleak. kmemcheck is
for catching references to uninitialized memory while kmemleak is for
detecting memory leaks. kmemcheck only works on x86 so far (with an
ARM patch by Ye Janboe, but it is not in mainline). kmemleak, however,
was written on ARM.

I put Catalin Marinas (kmemleak author) on Cc.

Please correct me if I am wrong. Good luck.


Vegard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: naveen yadav on 20 Apr 2010 06:20
Hi Vegard,

Thanks for your answer, but this is coming from kmemchek only

thanks
naveen
On Tue, Apr 20, 2010 at 1:31 PM, Vegard Nossum <vegard.nossum(a)gmail.com> wrote:
> On 19 April 2010 15:23, naveen yadav <yad.naveen(a)gmail.com> wrote:
>> Hi,
>>
>> � � � I �am �trying to � run �Kmemcheck on � a �Cortex ( ARM-v7)
>> board �running �Linux 2.6.30.9
>>
>> At boot-up time, �as �soon �as �Timer-device is �enabled, � I �find
>> that � timer �gets �disabled �because �system
>> gets spurious �interrupts �on �that �irq �line.
>>
>>
>> PID hash table entries: 1024 (order: 10, 4096 bytes)
>> Linux System timer initialize
>> irq 23: nobody cared (try booting with the "irqpoll" option)
>> [<c002e148>] (unwind_backtrace+0x0/0xe8) from [<c002c4b8>]
>> (dump_stack+0x18/0x1c)
>> [<c002c4b8>] (dump_stack+0x18/0x1c) from [<c006ad74>]
>> (__report_bad_irq+0x80/0xb0)
>> [<c006ad74>] (__report_bad_irq+0x80/0xb0) from [<c006af28>]
>> (note_interrupt+0x184/0x1f0)
>> [<c006af28>] (note_interrupt+0x184/0x1f0) from [<c006ba38>]
>> (handle_edge_irq+0xe8/0x160)
>> [<c006ba38>] (handle_edge_irq+0xe8/0x160) from [<c0027060>]
>> (asm_do_IRQ+0x60/0x74)
>> [<c0027060>] (asm_do_IRQ+0x60/0x74) from [<c0027a30>] (__irq_svc+0x30/0x80)
>> Exception stack(0xc0373ec0 to 0xc0373f08)
>> 3ec0: 00000017 c0372000 00000002 00000000 00000002 c038e8f4 00000000 0aa00000
>> 3ee0: c0372000 c03bfc40 0000001f c0373f44 00000100 c0373f08 c0047ffc c0047c98
>> 3f00: 20000153 ffffffff
>> [<c0027a30>] (__irq_svc+0x30/0x80) from [<c0047ffc>] (irq_exit+0x44/0x4c)
>> [<c0047ffc>] (irq_exit+0x44/0x4c) from [<c0047ffc>] (irq_exit+0x44/0x4c)
>> [<c0047ffc>] (irq_exit+0x44/0x4c) from [<c0027064>] (asm_do_IRQ+0x64/0x74)
>> [<c0027064>] (asm_do_IRQ+0x64/0x74) from [<c0027a30>] (__irq_svc+0x30/0x80)
>> Exception stack(0xc0373f78 to 0xc0373fc0)
>> 3f60: � � � � � � � � � � � � � � � � � � � � � � � � � � � 00000000 c037c15c
>> 3f80: 00000001 600001d3 955fffff c00242ec c0399f80 0aa00000 c0023000 412fc082
>> 3fa0: 0000001f c0373ff4 c0373fc0 c0373fc0 c0008974 c0019798 20000153 ffffffff
>> [<c0027a30>] (__irq_svc+0x30/0x80) from [<c0008974>] (start_kernel+0x168/0x3e4)
>> [<c0008974>] (start_kernel+0x168/0x3e4) from [<60008034>] (0x60008034)
>> handlers:
>> [<c003a604>] (sdp_timer_interrupt+0x0/0x38)
>> Disabling IRQ #23
>> Console: colour dummy device 80x30
>> console [ttyS1] enabled
>> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>>
>>
>> Later, �when �calibrating delay �loop, �the system is hung �as timer
>> is not working.
>>
>> The problem happens �even if �I �set kmemcheck_enabled = 0 at �boot.
>> ( I also commented out � � pagetable_init(&meminfo) �).
>>
>> �If �you have seen this before, �please let me know.
>>
>> ( I know that �your patch was written for � ARM v6. � � My cpu is
>> Cortex . � �I am aware that �I may have to make some change in the
>> �instruction simulation handling. )
>>
>> Thanks
>
> Hi,
>
> First up, I see a lot of funny � characters in your text.
>
> I think that this is not about kmemcheck, but kmemleak. kmemcheck is
> for catching references to uninitialized memory while kmemleak is for
> detecting memory leaks. kmemcheck only works on x86 so far (with an
> ARM patch by Ye Janboe, but it is not in mainline). kmemleak, however,
> was written on ARM.
>
> I put Catalin Marinas (kmemleak author) on Cc.
>
> Please correct me if I am wrong. Good luck.
>
>
> Vegard
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 | 
Pages: 1
Prev: percpu for v2.6.32
Next: uml: Remove unused variable from line driver