Prev: UG vs Mastercam
Next: Quality CAD Home Design, AutoCAD Interior Design, House Floor plans
From: Cliff on 23 Feb 2010 07:08
On Mon, 22 Feb 2010 08:28:34 -0800 (PST), Joe788 <larryrozer(a)yahoo.com> wrote:

>San Diego's 5th Axis CNC

http://www.reportingtransparency.ca.gov/Audits/Internal_Audits/Employment_Training_Panel/09_06_5thAxis_ADT.pdf
[
During the term of the Agreement, 5th Axis switched from using
Master Cam software to Open Mind Hyper-Mill software. The switch in software had
a huge
learning curve and the ETP funding allowed you to provide the critically needed
training hours
for the new system (off production).
]

They got $20,280 from the State of California for "training"
and it looks like they had been using a rather old version of MasterCAM
anyway.

Manage to drill any holes yet??

BTW, News was well over a year old. Stale, in fact.
"Training began on 6/01/07."
--
Cliff
From: Joe788 on 23 Feb 2010 11:44
On Feb 23, 4:08 am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om>
wrote:
> On Mon, 22 Feb 2010 08:28:34 -0800 (PST), Joe788 <larryro...(a)yahoo.com> wrote:
> >San Diego's 5th Axis CNC
>
> http://www.reportingtransparency.ca.gov/Audits/Internal_Audits/Employ...
> [
> During the term of the Agreement, 5th Axis switched from using
> Master Cam software to Open Mind Hyper-Mill software. The switch in software had
> a huge
> learning curve and the ETP funding allowed you to provide the critically needed
> training hours
> for the new system (off production).
> ]
>
>   They got $20,280 from the State of California for "training"
> and it looks like they had been using a rather old version of MasterCAM
> anyway.
>
>   Manage to drill any holes yet??
>
>   BTW, News was well over a year old. Stale, in fact.
>   "Training began on 6/01/07."
> --
> Cliff

Very interesting. Nice find Cliff!
From: Cliff on 24 Feb 2010 05:28
On Tue, 23 Feb 2010 08:44:03 -0800 (PST), Joe788 <joemama788(a)aol.com> wrote:

>On Feb 23, 4:08�am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om>
>wrote:
>> On Mon, 22 Feb 2010 08:28:34 -0800 (PST), Joe788 <larryro...(a)yahoo.com> wrote:
>> >San Diego's 5th Axis CNC
>>
>> http://www.reportingtransparency.ca.gov/Audits/Internal_Audits/Employ...
>> [
>> During the term of the Agreement, 5th Axis switched from using
>> Master Cam software to Open Mind Hyper-Mill software. The switch in software had
>> a huge
>> learning curve and the ETP funding allowed you to provide the critically needed
>> training hours
>> for the new system (off production).
>> ]
>>
>> � They got $20,280 from the State of California for "training"
>> and it looks like they had been using a rather old version of MasterCAM
>> anyway.
>>
>> � Manage to drill any holes yet??
>>
>> � BTW, News was well over a year old. Stale, in fact.
>> � "Training began on 6/01/07."
>> --
>> Cliff
>
>Very interesting. Nice find Cliff!

Has poor idiot clueless ever been right?
He still cannot even drill simple holes properly with MasterCAM !!
No clues does he have.
*I* spotted his blunders right away !!!
And I don't even use MC & never have. Not even a free 1 minute demo
(though we had some seats at AO Smith for some shop-floor programming stuff
as the employees, when hired, had been trained in MC to begin with IIRC).
--
Cliff
 | 
Pages: 1
Prev: UG vs Mastercam
Next: Quality CAD Home Design, AutoCAD Interior Design, House Floor plans