Prev: OWA 2007 Error
Next: OldestItemReceivedDate is empty
From: Dufrance on 2 Oct 2009 17:47
I have an iSCSI SAN storage (Stonefly HSC) and I have 2 Windows 2008
servers that have the
iSCSI initiator software installed. I have given access to both
servers so they can both access the array.

For now, I've just had them access it one at a time. (i.e. connect
server 1 to the array, then disconnect and then connect server 2 to
it).

I have the Failover Clustering feature installed on both servers.

When I run the Validation Wizard it fais and it says that "no disks
were found on which to perform cluster validation tests". At this
point both of the servers were disconnected from the array. I even
tried to connect one of the servers to the array but it's telling me
the same thing.

I've read thru Microsoft documentation but I cannot find any clear
direction on how to set this up.

Am I supposed to have the disks dsconnected? Or connected only on 1
host?
At what point do I connect both hosts to it?

Thanks in advance,
Debora
From: Ed Crowley [MVP] on 3 Oct 2009 11:14
Depends on whether you want to run SCC or CCR.
--
Ed Crowley MVP
"There are seldom good technological solutions to behavioral problems."
..

"Dufrance" <debora.micheal(a)gmail.com> wrote in message
news:519eeab4-9e27-4c13-9723-d1d39ed91935(a)r24g2000prf.googlegroups.com...
>I have an iSCSI SAN storage (Stonefly HSC) and I have 2 Windows 2008
> servers that have the
> iSCSI initiator software installed. I have given access to both
> servers so they can both access the array.
>
> For now, I've just had them access it one at a time. (i.e. connect
> server 1 to the array, then disconnect and then connect server 2 to
> it).
>
> I have the Failover Clustering feature installed on both servers.
>
> When I run the Validation Wizard it fais and it says that "no disks
> were found on which to perform cluster validation tests". At this
> point both of the servers were disconnected from the array. I even
> tried to connect one of the servers to the array but it's telling me
> the same thing.
>
> I've read thru Microsoft documentation but I cannot find any clear
> direction on how to set this up.
>
> Am I supposed to have the disks dsconnected? Or connected only on 1
> host?
> At what point do I connect both hosts to it?
>
> Thanks in advance,
> Debora

 | 
Pages: 1
Prev: OWA 2007 Error
Next: OldestItemReceivedDate is empty