From: Stephen M. Cameron on
From: Stephen M. Cameron <scameron(a)beardog.cce.hp.com>

cciss: factor out cciss_find_board_params

Signed-off-by: Stephen M. Cameron <scameron(a)beardog.cce.hp.com>
---
drivers/block/cciss.c | 52 ++++++++++++++++++++++++-------------------------
1 files changed, 25 insertions(+), 27 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b702471..97feb50 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4072,6 +4072,30 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
return 0;
}

+/* Interrogate the hardware for some limits:
+ * max commands, max SG elements without chaining, and with chaining,
+ * SG chain block size, etc.
+ */
+static void __devinit cciss_find_board_params(ctlr_info_t *h)
+{
+ h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+ h->nr_cmds = h->max_commands - 4; /* Allow room for some ioctls */
+ h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
+ /*
+ * Limit in-command s/g elements to 32 save dma'able memory.
+ * Howvever spec says if 0, use 31
+ */
+ h->max_cmd_sgentries = 31;
+ if (h->maxsgentries > 512) {
+ h->max_cmd_sgentries = 32;
+ h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1;
+ h->maxsgentries--; /* save one for chain pointer */
+ } else {
+ h->maxsgentries = 31; /* default to traditional values */
+ h->chainsize = 0;
+ }
+}
+
static int __devinit cciss_pci_init(ctlr_info_t *c)
{
int prod_index, err;
@@ -4127,34 +4151,8 @@ static int __devinit cciss_pci_init(ctlr_info_t *c)
#ifdef CCISS_DEBUG
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ cciss_find_board_params(c);

- /* Some controllers support Zero Memory Raid (ZMR).
- * When configured in ZMR mode the number of supported
- * commands drops to 64. So instead of just setting an
- * arbitrary value we make the driver a little smarter.
- * We read the config table to tell us how many commands
- * are supported on the controller then subtract 4 to
- * leave a little room for ioctl calls.
- */
- c->max_commands = readl(&(c->cfgtable->MaxPerformantModeCommands));
- c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
-
- /*
- * Limit native command to 32 s/g elements to save dma'able memory.
- * Howvever spec says if 0, use 31
- */
-
- c->max_cmd_sgentries = 31;
- if (c->maxsgentries > 512) {
- c->max_cmd_sgentries = 32;
- c->chainsize = c->maxsgentries - c->max_cmd_sgentries + 1;
- c->maxsgentries -= 1; /* account for chain pointer */
- } else {
- c->maxsgentries = 31; /* Default to traditional value */
- c->chainsize = 0; /* traditional */
- }
-
- c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/