Prev: [Samba] WG: Synchronisation using LDAP
Next: Fail to join a Windows 2008 R2 to a Samba+LDAP PDC version3.5.4
From: German Molano on 2 Jul 2010 08:50
Hi there, this is my config, I have a CentOS 5.3 x86_64 full updated
with Xen enabled with Samba 3.5.4 sernet RPMs. I have a virtual machine
running Windows 2008 R2 Foundation running full virtualized on the
same machine.
When i tried to join the Windows 2008 to the domain i get this message:
The following error ocurred attempting to join the domain "MYDOMAIN":
A device attached to the system is not functioning.

The Windows 2008 registry was modified to be able to join the domain as
recommended on internet:
|HKLM\System\CurrentControlSet\Services\LanmanWorkstation\Parameters
DWORD DomainCompatibilityMode = 1
DWORD DNSNameResolutionRequired = 0
||HKLM\System\CurrentControlSet\Services\Netlogon\Parameters
DWORD RequireSignOrSeal = 0
DWORD RequireStrongKey = 0
|
This is my config:
smb.conf
[global]

unix charset = ISO8859-1
workgroup = MYDOMAIN
netbios name = pdc
passdb backend = ldapsam:ldap://127.0.0.1
username map = /etc/samba/smbusers
log level = 10
log file = /var/log/samba/%m.log
max log size = 50
name resolve order = hosts lmhost wins bcast
wins support = yes
time server = Yes
show add printer wizard = No
add user script = /usr/sbin/smbldap-useradd -a -m %u
delete user script = /usr/sbin/smbldap-userdel -r %u
add group script = /usr/sbin/smbldap-groupadd -p %g
delete group script = /usr/sbin/smbldap-groupdel %g
add user to group script = /usr/sbin/smbldap-groupmod -m %u %g
delete user from group script = /usr/sbin/smbldap-groupmod -x %u %g
set primary group script = /usr/sbin/smbldap-usermod -g %g %u
add machine script = /usr/sbin/smbldap-useradd -w -i %u
passwd program = /usr/sbin/smbldap-passwd %u
passwd chat = *New*password* %n\n *Retype*new*password* %n\n
*all*authentication*tokens*updated*
ldap password sync = Yes
enable privileges = Yes
logon script = %U.bat OR netlogon.bat
logon path = \\%L\profiles\%U
logon drive = H:
domain logons = Yes
preferred master = Yes
domain master = Yes
ldap admin dn = cn=Administrador,dc=mydomain,dc=local
ldap group suffix = ou=Groups
ldap idmap suffix = ou=Idmap
ldap machine suffix = ou=Computers
ldap passwd sync = Yes
ldap suffix = dc=mydomain,dc=local
ldap user suffix = ou=Users
ldap ssl = off
idmap backend = ldap:ldap://127.0.0.1
idmap uid = 10000-20000
idmap gid = 10000-20000
printer admin = Administrador
map acl inherit = Yes
printing = cups
printcap name = CUPS

[homes]
comment = Home Directories
valid users = %S
read only = No
browseable = No

[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
guest ok = Yes
locking = No

[profiles]
comment = Network Profiles Share
path = /var/lib/samba/profiles
read only = No
profile acls = Yes
create mode = 0600
directory mode = 0700
writable = yes
browseable = No
store dos attributes = Yes


slapd.conf

#
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
include /etc/openldap/schema/samba3.schema
include /etc/openldap/schema/dyngroup.schema

# Allow LDAPv2 client connections. This is NOT the default.
allow bind_v2

# Do not enable referrals until AFTER you have a working directory
# service AND an understanding of referrals.
#referral ldap://root.openldap.org

pidfile /var/run/openldap/slapd.pid
argsfile /var/run/openldap/slapd.args

# Load dynamic backend modules:
modulepath /usr/lib64/openldap

# Modules available in openldap-servers-overlays RPM package
# Module syncprov.la is now statically linked with slapd and there
# is no need to load it here
# moduleload accesslog.la
# moduleload auditlog.la
# moduleload denyop.la
# moduleload dyngroup.la
# moduleload dynlist.la
# moduleload lastmod.la
# moduleload pcache.la
# moduleload ppolicy.la
# moduleload refint.la
# moduleload retcode.la
# moduleload rwm.la
# moduleload smbk5pwd.la
# moduleload translucent.la
# moduleload unique.la
# moduleload valsort.la

# modules available in openldap-servers-sql RPM package:
# moduleload back_sql.la

# The next three lines allow use of TLS for encrypting connections using a
# dummy test certificate which you can generate by changing to
# /etc/pki/tls/certs, running "make slapd.pem", and fixing permissions on
# slapd.pem so that the ldap user or group can read it. Your client
software
# may balk at self-signed certificates, however.
# TLSCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
# TLSCertificateFile /etc/pki/tls/certs/slapd.pem
# TLSCertificateKeyFile /etc/pki/tls/certs/slapd.pem

# Sample security restrictions
# Require integrity protection (prevent hijacking)
# Require 112-bit (3DES or better) encryption for updates
# Require 63-bit encryption for simple bind
# security ssf=1 update_ssf=112 simple_bind=64

# Sample access control policy:
# Root DSE: allow anyone to read it
# Subschema (sub)entry DSE: allow anyone to read it
# Other DSEs:
# Allow self write access
# Allow authenticated users read access
# Allow anonymous users to authenticate
# Directives needed to implement policy:
# access to dn.base="" by * read
# access to dn.base="cn=Subschema" by * read
# access to *
# by self write
# by users read
# by anonymous auth
#
# if no access controls are present, the default policy
# allows anyone and everyone to read anything but restricts
# updates to rootdn. (e.g., "access to * by * read")
#
# rootdn can always read and write EVERYTHING!

#######################################################################
# ldbm and/or bdb database definitions
#######################################################################

database bdb
suffix "dc=mydomain,dc=local"
rootdn "cn=Administrador,dc=mydomain,dc=local"
# Cleartext passwords, especially for the rootdn, should
# be avoided. See slappasswd(8) and slapd.conf(5) for details.
# Use of strong authentication encouraged.
rootpw mypassword
# rootpw {crypt}ijFYNcSNctBYg

# The database directory MUST exist prior to running slapd AND
# should only be accessible by the slapd and slap tools.
# Mode 700 recommended.
directory /var/lib/ldap

# Indices to maintain for this database
#index objectClass eq,pres
#index ou,cn,mail,surname,givenname eq,pres,sub
#index uidNumber,gidNumber,loginShell eq,pres
#index uid,memberUid eq,pres,sub
#index nisMapName,nisMapEntry eq,pres,sub
index objectClass eq
index cn pres,sub,eq
index sn pres,sub,eq
index uid pres,sub,eq
index displayName pres,sub,eq
index uidNumber eq
index gidNumber eq
index memberUID eq
index sambaSID eq
index sambaPrimaryGroupSID eq
index sambaDomainName eq
index default sub

smbldap_bind.conf
slaveDN="cn=Administrador,dc=mydomain,dc=local"
slavePw="mypassword"
masterDN="cn=Administrador,dc=mydomain,dc=local"
masterPw="mypassword"

smbldap.conf
##############################################################################
#
# General Configuration
#
##############################################################################

# Put your own SID. To obtain this number do: "net getlocalsid".
# If not defined, parameter is taking from "net getlocalsid" return
SID="S-1-5-21-3618261801-835847047-1814652966"

# Domain name the Samba server is in charged.
# If not defined, parameter is taking from smb.conf configuration file
# Ex: sambaDomain="IDEALX-NT"
sambaDomain="MYDOMAIN"

##############################################################################
#
# LDAP Configuration
#
##############################################################################

# Notes: to use to dual ldap servers backend for Samba, you must patch
# Samba with the dual-head patch from IDEALX. If not using this patch
# just use the same server for slaveLDAP and masterLDAP.
# Those two servers declarations can also be used when you have
# . one master LDAP server where all writing operations must be done
# . one slave LDAP server where all reading operations must be done
# (typically a replication directory)

# Slave LDAP server
# Ex: slaveLDAP=127.0.0.1
# If not defined, parameter is set to "127.0.0.1"
slaveLDAP="127.0.0.1"

# Slave LDAP port
# If not defined, parameter is set to "389"
slavePort="389"

# Master LDAP server: needed for write operations
# Ex: masterLDAP=127.0.0.1
# If not defined, parameter is set to "127.0.0.1"
masterLDAP="127.0.0.1"

# Master LDAP port
# If not defined, parameter is set to "389"
masterPort="389"

# Use TLS for LDAP
# If set to 1, this option will use start_tls for connection
# (you should also used the port 389)
# If not defined, parameter is set to "1"
ldapTLS="0"

# How to verify the server's certificate (none, optional or require)
# see "man Net::LDAP" in start_tls section for more details
verify=""

# CA certificate
# see "man Net::LDAP" in start_tls section for more details
cafile=""

# certificate to use to connect to the ldap server
# see "man Net::LDAP" in start_tls section for more details
clientcert=""

# key certificate to use to connect to the ldap server
# see "man Net::LDAP" in start_tls section for more details
clientkey=""

# LDAP Suffix
# Ex: suffix=dc=IDEALX,dc=ORG
suffix="dc=mydomain,dc=local"

# Where are stored Users
# Ex: usersdn="ou=Users,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for usersdn
usersdn="ou=Users,${suffix}"

# Where are stored Computers
# Ex: computersdn="ou=Computers,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for
computersdn
computersdn="ou=Computers,${suffix}"

# Where are stored Groups
# Ex: groupsdn="ou=Groups,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for
groupsdn
groupsdn="ou=Groups,${suffix}"

# Where are stored Idmap entries (used if samba is a domain member server)
# Ex: groupsdn="ou=Idmap,dc=IDEALX,dc=ORG"
# Warning: if 'suffix' is not set here, you must set the full dn for idmapdn
idmapdn="ou=Idmap,${suffix}"

# Where to store next uidNumber and gidNumber available for new users
and groups
# If not defined, entries are stored in sambaDomainName object.
# Ex: sambaUnixIdPooldn="sambaDomainName=${sambaDomain},${suffix}"
# Ex: sambaUnixIdPooldn="cn=NextFreeUnixId,${suffix}"
sambaUnixIdPooldn="sambaDomainName=MYDOMAIN,${suffix}"

# Default scope Used
scope="sub"

# Unix password encryption (CRYPT, MD5, SMD5, SSHA, SHA, CLEARTEXT)
hash_encrypt="MD5"

# if hash_encrypt is set to CRYPT, you may set a salt format.
# default is "%s", but many systems will generate MD5 hashed
# passwords if you use "$1$%.8s". This parameter is optional!
crypt_salt_format=""

##############################################################################
#
# Unix Accounts Configuration
#
##############################################################################

# Login defs
# Default Login Shell
# Ex: userLoginShell="/bin/bash"
userLoginShell="/bin/false"

# Home directory
# Ex: userHome="/home/%U"
userHome="/home/%U"

# Default mode used for user homeDirectory
userHomeDirectoryMode="700"

# Gecos
userGecos="System User"

# Default User (POSIX and Samba) GID
defaultUserGid="513"

# Default Computer (Samba) GID
defaultComputerGid="515"

# Skel dir
skeletonDir="/etc/skel"

# Default password validation time (time in days) Comment the next line if
# you don't want password to be enable for defaultMaxPasswordAge days (be
# careful to the sambaPwdMustChange attribute's value)
defaultMaxPasswordAge="45"

##############################################################################
#
# SAMBA Configuration
#
##############################################################################

# The UNC path to home drives location (%U username substitution)
# Just set it to a null string if you want to use the smb.conf 'logon home'
# directive and/or disable roaming profiles
# Ex: userSmbHome="\\PDC-SMB3\%U"
userSmbHome="\\pdc\%U"

# The UNC path to profiles locations (%U username substitution)
# Just set it to a null string if you want to use the smb.conf 'logon path'
# directive and/or disable roaming profiles
# Ex: userProfile="\\PDC-SMB3\profiles\%U"
userProfile="\\pdc\profiles\%U"

# The default Home Drive Letter mapping
# (will be automatically mapped at logon time if home directory exist)
# Ex: userHomeDrive="H:"
userHomeDrive="H:"

# The default user netlogon script name (%U username substitution)
# if not used, will be automatically username.cmd
# make sure script file is edited under dos
# Ex: userScript="startup.cmd" # make sure script file is edited under dos
userScript="%U.bat OR netlogon.bat"

# Domain appended to the users "mail"-attribute
# when smbldap-useradd -M is used
# Ex: mailDomain="idealx.com"
mailDomain="mydomain.local"

##############################################################################
#
# SMBLDAP-TOOLS Configuration (default are ok for a RedHat)
#
##############################################################################

# Allows not to use smbpasswd (if with_smbpasswd == 0 in
smbldap_conf.pm) but
# prefer Crypt::SmbHash library
with_smbpasswd="0"
smbpasswd="/usr/bin/smbpasswd"

# Allows not to use slappasswd (if with_slappasswd == 0 in smbldap_conf.pm)
# but prefer Crypt:: libraries
with_slappasswd="0"
slappasswd="/usr/sbin/slappasswd"

# comment out the following line to get rid of the default banner
# no_banner="1"

The LDAP was correctly populated, and i am able to manage users using
smbldap-tools.
One final detail, when i tried to join the Windows 2008, in the joinning
process the workstation trust account is successfully created. I see it
with smbldap-userlist command or a Windows based Ldap administrator.
Apparently the Windows 2008 in its event manager does not give much
information about the error.
If you need the samba joinning logs with debug level 10 i have them.


Thanks for your help



German Molano
 | 
Pages: 1
Prev: [Samba] WG: Synchronisation using LDAP
Next: Fail to join a Windows 2008 R2 to a Samba+LDAP PDC version3.5.4