Sup 2.0 Drum X-drum question
in [Cakewalk]
|
Prev: Chord Of The Day
Next: Video: Lost at Sea
From: jeffl on 29 Jan 2010 00:44 Okay, I have a base drum kit-Thrall uptempo kit-wanna just add a tambourine but when I pick one out from the percussionist folder it will not sound. BTW-I'm able to load the entire percussion ist as a base kit and play. And I'm also able to load in other x-drums and they will sound --just not percussion...? Another BTW---not sure if anyone remembers me having problems loading the Metal Foundry samples into my DAW(bad cd drive)--I did a workaround by loading them into an ext drive thru a different computer and then loaded the samples into my DAW successfully. Curiously I was never prompted to register my product w/my serial number and MF works and shows up fine in Sup 2.0 for me. I did, however recently load in my NY Hit factory (excellent-sounds GREAT) and Allaire with the usual song/dance registration. What's with the MF-will I have a surprise down the road...?
From: jeffl on 29 Jan 2010 17:30 > When you add the X-Pad, you are selecting Percussionist for the library, > then tambourine, and you are getting the icon that looks like a tambo? yes--I've added other x-drums but nothing from percussion will sound as x-drum. (I can load the entire percussion thang) hmmm.... > I just tried adding one to my normal kit in Reaper, and it seemed to work. > Should be the same in Sonar I would guess. > > -- > Remove YourHeadFromYourAss to Reply by email > ________ __ > / ____/ /__ ____ ____ / /_ ____ > / / __/ / _ \/ __ \/ __ \/ __ \/ __ \ > / /_/ / / __/ / / / / / / /_/ / /_/ / > \____/_/\___/_/ /_/_/ /_/_.___/\____/ > --------------------------------------------------------------------- > Glennbo http://www.soundclick.com/glennbo > Non-Linear Sound http://www.soundclick.com/jambits > Hear My Music http://www.soundclick.com/ThePseudonyms
From: "Dave "Mod Bod" Modisette" on 30 Jan 2010 11:33 Glennbo wrote: > In news:hjvnj4$qmt$1(a)news.eternal-september.org the killer robot "jeffl" > <people(a)people.com> grabbed the controls of the spaceship cakewalk.audio > and pressed these buttons... > >>> When you add the X-Pad, you are selecting Percussionist for the library, >>> then tambourine, and you are getting the icon that looks like a tambo? >> yes--I've added other x-drums but nothing from percussion will sound as >> x-drum. (I can load the entire percussion thang) >> hmmm.... > > Do you get the icon for a tambourine? > > Also, have you tried clicking on the test pad (with the speaker on it) at > the bottom right? It should say X1 or some number for the X-pad, followed > by "Tambourine". You might also want to look on Superior's mixer to see > where the tambo is being sent. I just checked where it was sending when I > added one and it was going to outputs 11/12, which if I didn't have a > receive setup in my DAW, would be silent. > I just tried it in Reaper 3.21 X64 and Superior worked as expected. However, you DO need to map the five different articulations that the Percussion EZX tamborine has to notes on your controller. I didn't use the Metal Foundry but I used the Evil Drums SDX I had in a project and it worked fine. -- Dave "Mod Bod" Modisette http://www.gatortraks.com/forum http://www.gatortraks.com
From: jeffl on 30 Jan 2010 15:15 okay-I get the tambourine icon. it does not sound and there is not a channel for tambourine on the mixer to manipulate...the spkr icon on bottom right does not sound either... "However, you DO need to map the five different articulations that the Percussion EZX tamborine has to notes on your controller." Can u help me do this--I'll look for a WAY in the meantime. "Glennbo" <vdrumsYourHeadFromYourAss(a)cox.net> wrote in message news:Xns9D0FB435D54FFBrownShoesDontMakeIt(a)69.16.185.250... > In news:hjvnj4$qmt$1(a)news.eternal-september.org the killer robot "jeffl" > <people(a)people.com> grabbed the controls of the spaceship cakewalk.audio > and pressed these buttons... > >>> When you add the X-Pad, you are selecting Percussionist for the library, >>> then tambourine, and you are getting the icon that looks like a tambo? >> >> yes--I've added other x-drums but nothing from percussion will sound as >> x-drum. (I can load the entire percussion thang) >> hmmm.... > > Do you get the icon for a tambourine? > > Also, have you tried clicking on the test pad (with the speaker on it) at > the bottom right? It should say X1 or some number for the X-pad, followed > by "Tambourine". You might also want to look on Superior's mixer to see > where the tambo is being sent. I just checked where it was sending when I > added one and it was going to outputs 11/12, which if I didn't have a > receive setup in my DAW, would be silent. > > -- > Remove YourHeadFromYourAss to Reply by email > ________ __ > / ____/ /__ ____ ____ / /_ ____ > / / __/ / _ \/ __ \/ __ \/ __ \/ __ \ > / /_/ / / __/ / / / / / / /_/ / /_/ / > \____/_/\___/_/ /_/_/ /_/_.___/\____/ > --------------------------------------------------------------------- > Glennbo http://www.soundclick.com/glennbo > Non-Linear Sound http://www.soundclick.com/jambits > Hear My Music http://www.soundclick.com/ThePseudonyms
From: "Dave "Mod Bod" Modisette" on 30 Jan 2010 21:19
jeffl wrote: > okay-I get the tambourine icon. it does not sound and there is not a > channel for tambourine on the mixer to manipulate...the spkr icon on > bottom right does not sound either... > > "However, you DO need to map the five different articulations that the > Percussion EZX tamborine has to notes on your controller." > > Can u help me do this--I'll look for a WAY in the meantime. This may be a configuration bug. It seems to only happen in The Metal Foundry. You must open the Mic Assignment window and drag the green Tambourine icon (ok, no jokes) and drop it on the orange "New" icon and it will create a mic channel. On other SDX kits it automatically routs the tambourine to a channel. I'll report this to the betatest team group. -- Dave "Mod Bod" Modisette http://www.gatortraks.com/forum http://www.gatortraks.com |