From: Justin on
I just installed ubuntu 8.10 in the windows as an app like it says i can
everything seems to be working but i can not connect to the internet or my
network in any way. it says connection established to auto ethernet or
something like that but i can get internet on my windows part of the computer
just not ubuntu. i would like to connect just to update
here are the specs:

Mainboard : IBM IBM
Chipset : Intel i945G/GZ
Processor : Intel Celeron D 336 @ 2800 MHz
Physical Memory : 512 MB (1 x 512 DDR2-SDRAM )
Video Card : Intel(R) 82945G Express Chipset Family
Hard Disk : WDC (40 GB)
CD-Rom Drive : SanDisk Cruzer USB Device
CD-Rom Drive : HL-DT-ST CD-ROM GCR-8482B
Network Card : PRO/1000 PM Network Connection
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
DirectX : Version 9.0c (October 2008)

From: Anteaus on
You don't seem to say what means you use to connect to the Internet. Linux
generally expects to see an Ethernet router connected to the LAN port. If
this has DHCP you may not need to do anything other than plug the RJ45 in. If
it doesn't you may need to set the IP address manually.

Tip: the ifconfig command is roughly the equivalent of ipconfig on Windows,
and can tell something of you what's going on. You should also try pinging
the router, assuming you have one.

http://en.wikipedia.org/wiki/Ifconfig

Dialup or USB-modem connections are also possible with Linux, but trickier.

"Justin" wrote:

> I just installed ubuntu 8.10 in the windows as an app like it says i can
> everything seems to be working but i can not connect to the internet or my
> network in any way. it says connection established to auto ethernet or
> something like that but i can get internet on my windows part of the computer
> just not ubuntu. i would like to connect just to update
> here are the specs:
>
> Mainboard : IBM IBM
> Chipset : Intel i945G/GZ
> Processor : Intel Celeron D 336 @ 2800 MHz
> Physical Memory : 512 MB (1 x 512 DDR2-SDRAM )
> Video Card : Intel(R) 82945G Express Chipset Family
> Hard Disk : WDC (40 GB)
> CD-Rom Drive : SanDisk Cruzer USB Device
> CD-Rom Drive : HL-DT-ST CD-ROM GCR-8482B
> Network Card : PRO/1000 PM Network Connection
> Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
> DirectX : Version 9.0c (October 2008)
>
From: Justin on
ok to connect to the internet i was using a router(Motorola from at&t) that
hooked up to my hub that split into 8 different devices but i had everything
unpluged except my comp and the router so i culd connect and the first
message i started was my computer using everything i described but cannot
use the internet on my ubuntu boot using everything i described so it works
through windows but not throught ubuntu just help i know little about ubuntu
so make it easy

"Anteaus" wrote:

> You don't seem to say what means you use to connect to the Internet. Linux
> generally expects to see an Ethernet router connected to the LAN port. If
> this has DHCP you may not need to do anything other than plug the RJ45 in. If
> it doesn't you may need to set the IP address manually.
>
> Tip: the ifconfig command is roughly the equivalent of ipconfig on Windows,
> and can tell something of you what's going on. You should also try pinging
> the router, assuming you have one.
>
> http://en.wikipedia.org/wiki/Ifconfig
>
> Dialup or USB-modem connections are also possible with Linux, but trickier.
>
> "Justin" wrote:
>
> > I just installed ubuntu 8.10 in the windows as an app like it says i can
> > everything seems to be working but i can not connect to the internet or my
> > network in any way. it says connection established to auto ethernet or
> > something like that but i can get internet on my windows part of the computer
> > just not ubuntu. i would like to connect just to update
> > here are the specs:
> >
> > Mainboard : IBM IBM
> > Chipset : Intel i945G/GZ
> > Processor : Intel Celeron D 336 @ 2800 MHz
> > Physical Memory : 512 MB (1 x 512 DDR2-SDRAM )
> > Video Card : Intel(R) 82945G Express Chipset Family
> > Hard Disk : WDC (40 GB)
> > CD-Rom Drive : SanDisk Cruzer USB Device
> > CD-Rom Drive : HL-DT-ST CD-ROM GCR-8482B
> > Network Card : PRO/1000 PM Network Connection
> > Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 2
> > DirectX : Version 9.0c (October 2008)
> >