Prev: WM6 deleting emails after they've been read/downloaded - a bug??
Next: Activesync 4.2 Setup failure
From: Steven Munoz on 24 Nov 2007 16:29
Thanks JH, but this software support WM6? which version will be used?

"JH" wrote:

> Steven,
> Go to www.anthasoft.com and purchase their AnthaVPN for Windows Mobile. This
> works great. I used to use it on my Treo 700wx.
>
> housej55
>
>
>
> "Steven Munoz" <StevenMunoz(a)discussions.microsoft.com> wrote in message
> news:76240B0E-244A-42D4-BC08-8DE40ED44145(a)microsoft.com...
> > Hi
> >
> > In me case, the company vpn is a IPSEC (no L2TP)vpn, for that I need a vpn
> > client that use this protocol.
> >
> > Which other vpn client do you recommend?
> >
> > "Steve Riley [MSFT]" wrote:
> >
> >> Windows Mobile 6 supports PPTP and L2TP+IPsec. So long as your Cisco VPN
> >> server is configured for either of these, it should work. Both protocols
> >> are
> >> standards that have been around for a while.
> >>
> >> --
> >> Steve Riley
> >> steve.riley(a)microsoft.com
> >> http://blogs.technet.com/steriley
> >> http://www.protectyourwindowsnetwork.com
> >>
> >>
> >> "Steven Munoz" <StevenMunoz(a)discussions.microsoft.com> wrote in message
> >> news:2B4D7BD9-73FF-4E6C-B843-5A6C84A7B3BB(a)microsoft.com...
> >> > Hi guys,
> >> > I have a hp Ipaq 510 Voice Messenger with Windows Mobile 6.0 Standard.
> >> > I'm want to connect to my company network through Cisco VPN, the
> >> > built-in
> >> > VPN client support IPSec Cisco VPN? Do you know if exists a Cisco VPN
> >> > client
> >> > for WM6 standard?
> >> >
> >> > Thanks,
> >>
> >>
>
>
>
From: mooneh on 28 Nov 2007 05:33
I am also trying to connect wm6 device to CISCO device: the ASA. Has
anyone had any success with this at all?
I know it should work but it simply doesn't even try to connect.


On Nov 24, 9:29 pm, Steven Munoz
<StevenMu...(a)discussions.microsoft.com> wrote:
> Thanks JH, but this software support WM6? which version will be used?
>
>
>
> "JH" wrote:
> > Steven,
> > Go towww.anthasoft.comand purchase their AnthaVPN forWindowsMobile. This
> > works great. I used to use it on my Treo 700wx.
>
> > housej55
>
> > "Steven Munoz" <StevenMu...(a)discussions.microsoft.com> wrote in message
> >news:76240B0E-244A-42D4-BC08-8DE40ED44145(a)microsoft.com...
> > > Hi
>
> > > In me case, the companyvpnis a IPSEC (no L2TP)vpn, for that I need avpn
> > > client that use this protocol.
>
> > > Which othervpnclient do you recommend?
>
> > > "Steve Riley [MSFT]" wrote:
>
> > >>WindowsMobile6 supports PPTP and L2TP+IPsec. So long as your CiscoVPN
> > >> server is configured for either of these, it should work. Both protocols
> > >> are
> > >> standards that have been around for a while.
>
> > >> --
> > >> Steve Riley
> > >> steve.ri...(a)microsoft.com
> > >>http://blogs.technet.com/steriley
> > >>http://www.protectyourwindowsnetwork.com
>
> > >> "Steven Munoz" <StevenMu...(a)discussions.microsoft.com> wrote in message
> > >>news:2B4D7BD9-73FF-4E6C-B843-5A6C84A7B3BB(a)microsoft.com...
> > >> > Hi guys,
> > >> > I have a hp Ipaq 510 Voice Messenger withWindowsMobile6.0 Standard.
> > >> > I'm want to connect to my company network through CiscoVPN, the
> > >> > built-in
> > >> >VPNclient support IPSec CiscoVPN? Do you know if exists a CiscoVPN
> > >> > client
> > >> > for WM6 standard?
>
> > >> > Thanks,- Hide quoted text -
>
> - Show quoted text -

From: whitemilk on 29 Nov 2007 06:01

I've just configured a VPN IPSEC tunnel using ANTHAVPN and ASA, the
tunnel goes up but no traffic are routed throught the tunnel.
I checked the policy and I can see my split tunnel rules.
Any ideas? Do you know anything about some similar problems?

Thanks,
M


On 28 Nov, 11:33, moo...(a)gmail.com wrote:
> I am also trying to connect wm6 device to CISCO device: the ASA. Has
> anyone had any success with this at all?
> I know it should work but it simply doesn't even try to connect.
>
> On Nov 24, 9:29 pm, Steven Munoz
>
> <StevenMu...(a)discussions.microsoft.com> wrote:
> > Thanks JH, but this software support WM6? which version will be used?
>
> > "JH" wrote:
> > > Steven,
> > > Go towww.anthasoft.comandpurchase theirAnthaVPNforWindowsMobile. This
> > > works great. I used to use it on my Treo 700wx.
>
> > > housej55
>
> > > "Steven Munoz" <StevenMu...(a)discussions.microsoft.com> wrote in message
> > >news:76240B0E-244A-42D4-BC08-8DE40ED44145(a)microsoft.com...
> > > > Hi
>
> > > > In me case, the companyvpnis a IPSEC (no L2TP)vpn, for that I need avpn
> > > > client that use this protocol.
>
> > > > Which othervpnclient do you recommend?
>
> > > > "Steve Riley [MSFT]" wrote:
>
> > > >>WindowsMobile6 supports PPTP and L2TP+IPsec. So long as your CiscoVPN
> > > >> server is configured for either of these, it should work. Both protocols
> > > >> are
> > > >> standards that have been around for a while.
>
> > > >> --
> > > >> Steve Riley
> > > >> steve.ri...(a)microsoft.com
> > > >>http://blogs.technet.com/steriley
> > > >>http://www.protectyourwindowsnetwork.com
>
> > > >> "Steven Munoz" <StevenMu...(a)discussions.microsoft.com> wrote in message
> > > >>news:2B4D7BD9-73FF-4E6C-B843-5A6C84A7B3BB(a)microsoft.com...
> > > >> > Hi guys,
> > > >> > I have a hp Ipaq 510 Voice Messenger withWindowsMobile6.0 Standard.
> > > >> > I'm want to connect to my company network through CiscoVPN, the
> > > >> > built-in
> > > >> >VPNclient support IPSec CiscoVPN? Do you know if exists a CiscoVPN
> > > >> > client
> > > >> > for WM6 standard?
>
> > > >> > Thanks,- Hide quoted text -
>
> > - Show quoted text -

From: bmatteo on 11 Dec 2007 07:49

>I checked the policy and I can see my split tunnel rules.
>Any ideas? Do you know anything about some similar problems?

Normally it is due to access-list for policies and no-NAT. Otherwise,
it could be due to NAT-T settings or a non-IPSec passthrough local
gateway (router, firewall, GSM service...).


I need to setup AnthaVPN, the VPN server is CISCO PIX version 6.
I have problem with IPSec rules on the PIX.
Have you got any config sample for PIX ver6, working with AnthaVPN
client?

Many thanks in advance
Matteo


--
bmatteo
First  |  Prev  | 
Pages: 1 2
Prev: WM6 deleting emails after they've been read/downloaded - a bug??
Next: Activesync 4.2 Setup failure