Prev: Cisco ATM problem
Next: AQuA Powered Asterisk Voice Quality Monitoring Solution
From: CREAM on 18 May 2010 16:49
Hi, I'm trying to get this ospf to work on my network. I can't seem to
get it. I would really appreciate a correct config on the ospf. Please
look at it.



hostname Lima_RT1
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$6jwG$jI1JKhcN1nQRaOhD3gPz50
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
no ip dhcp use vrf connected
!
ip dhcp pool 88
network 172.20.13.0 255.255.255.240
!
ip dhcp pool 19
network 172.20.12.0 255.255.255.0
!
ip dhcp pool 17
network 172.20.8.0 255.255.252.0
!
ip dhcp pool 11
network 172.20.0.0 255.255.248.0
!
!
!
username LIMA_RT2 password 0 cisco
!
!
!
interface Loopback0
ip address 10.0.2.1 255.255.255.255
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.11
encapsulation dot1Q 11
ip address 172.20.0.1 255.255.248.0
no snmp trap link-status
!
interface FastEthernet0/0.17
encapsulation dot1Q 17
ip address 172.20.8.2 255.255.252.0
no snmp trap link-status
!
interface FastEthernet0/0.19
encapsulation dot1Q 14
ip address 172.20.12.1 255.255.255.0
no snmp trap link-status
!
interface FastEthernet0/0.88
encapsulation dot1Q 88 native
ip address 172.20.13.1 255.255.255.240
ip access-group 115 in
no snmp trap link-status
!
interface FastEthernet0/0.195
!
interface FastEthernet0/0.196
!
interface FastEthernet0/0.197
!
interface FastEthernet0/0.198
!
interface FastEthernet0/1
ip address 192.168.254.253 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0/0
ip address 172.0.255.2 255.255.255.252
encapsulation frame-relay
shutdown
no fair-queue
clockrate 125000
!
interface Serial0/0/0.201 point-to-point
ip access-group 101 in
ip access-group 101 out
!
interface Serial0/0/0.202 point-to-point
ip address 172.0.255.13 255.255.255.252
!
interface Serial0/0/0.203 point-to-point
ip address 172.0.255.17 255.255.255.252
!
interface Serial0/0/1
ip address 172.0.255.33 255.255.255.252
encapsulation ppp
clockrate 64000
ppp authentication chap
!
router ospf 1
log-adjacency-changes
network 172.0.255.0 0.0.0.3 area 0
network 172.0.255.12 0.0.0.3 area 0
network 172.0.255.16 0.0.0.3 area 0
network 172.0.255.32 0.0.0.3 area 0
network 172.20.0.0 0.0.7.255 area 0
network 172.20.12.0 0.0.0.3 area 0
network 172.20.13.0 0.0.0.15 area 0
!
ip classless
!
ip http server
!
access-list 102 permit tcp host 172.20.0.2 host 192.168.254.254 eq ftp
access-list 102 deny tcp host 172.20.0.2 host 192.168.254.254 eq
5190
access-list 102 deny tcp host 172.20.0.2 host 192.168.254.254 eq
5050
access-list 102 permit tcp host 172.20.0.2 host 192.168.254.254 eq www
access-list 103 permit tcp host 172.20.8.2 host 192.168.254.254 eq www
access-list 103 deny tcp host 172.20.8.2 host 192.168.254.254 eq
5050
access-list 103 permit tcp host 172.20.8.2 host 192.168.254.254 eq ftp
access-list 103 permit tcp host 172.20.12.2 host 192.168.254.254 eq
www
access-list 103 deny tcp host 172.20.8.2 host 192.168.254.254 eq
5190
access-list 106 permit tcp host 172.20.12.2 host 192.168.254.254 eq
ftp
access-list 106 permit tcp host 172.20.12.2 host 192.168.254.254
access-list 106 deny tcp host 172.20.12.2 host 192.168.254.254 eq
5190
access-list 106 deny tcp host 172.20.12.2 host 192.168.254.254 eq
5050
!
control-plane
!
banner motd ^CCWelcome to RT1 ^C
!
line con 0
password cisco
login
line aux 0
line vty 0 4
password cisco
login
!
scheduler allocate 20000 1000
end
From: Brian V on 18 May 2010 17:42


"CREAM" <fbalbert(a)gmail.com> wrote in message
news:353d93e1-a77e-412e-9e5c-decbd84fe212(a)h37g2000pra.googlegroups.com...
> Hi, I'm trying to get this ospf to work on my network. I can't seem to
> get it. I would really appreciate a correct config on the ospf. Please
> look at it.
>
>
>
> hostname Lima_RT1
> !
> boot-start-marker
> boot-end-marker
> !
> enable secret 5 $1$6jwG$jI1JKhcN1nQRaOhD3gPz50
> !
> no aaa new-model
> !
> resource policy
> !
> mmi polling-interval 60
> no mmi auto-configure
> no mmi pvc
> mmi snmp-timeout 180
> ip subnet-zero
> ip cef
> !
> !
> no ip dhcp use vrf connected
> !
> ip dhcp pool 88
> network 172.20.13.0 255.255.255.240
> !
> ip dhcp pool 19
> network 172.20.12.0 255.255.255.0
> !
> ip dhcp pool 17
> network 172.20.8.0 255.255.252.0
> !
> ip dhcp pool 11
> network 172.20.0.0 255.255.248.0
> !
> !
> !
> username LIMA_RT2 password 0 cisco
> !
> !
> !
> interface Loopback0
> ip address 10.0.2.1 255.255.255.255
> !
> interface FastEthernet0/0
> no ip address
> duplex auto
> speed auto
> !
> interface FastEthernet0/0.11
> encapsulation dot1Q 11
> ip address 172.20.0.1 255.255.248.0
> no snmp trap link-status
> !
> interface FastEthernet0/0.17
> encapsulation dot1Q 17
> ip address 172.20.8.2 255.255.252.0
> no snmp trap link-status
> !
> interface FastEthernet0/0.19
> encapsulation dot1Q 14
> ip address 172.20.12.1 255.255.255.0
> no snmp trap link-status
> !
> interface FastEthernet0/0.88
> encapsulation dot1Q 88 native
> ip address 172.20.13.1 255.255.255.240
> ip access-group 115 in
> no snmp trap link-status
> !
> interface FastEthernet0/0.195
> !
> interface FastEthernet0/0.196
> !
> interface FastEthernet0/0.197
> !
> interface FastEthernet0/0.198
> !
> interface FastEthernet0/1
> ip address 192.168.254.253 255.255.255.0
> duplex auto
> speed auto
> !
> interface Serial0/0/0
> ip address 172.0.255.2 255.255.255.252
> encapsulation frame-relay
> shutdown
> no fair-queue
> clockrate 125000
> !
> interface Serial0/0/0.201 point-to-point
> ip access-group 101 in
> ip access-group 101 out
> !
> interface Serial0/0/0.202 point-to-point
> ip address 172.0.255.13 255.255.255.252
> !
> interface Serial0/0/0.203 point-to-point
> ip address 172.0.255.17 255.255.255.252
> !
> interface Serial0/0/1
> ip address 172.0.255.33 255.255.255.252
> encapsulation ppp
> clockrate 64000
> ppp authentication chap
> !
> router ospf 1
> log-adjacency-changes
> network 172.0.255.0 0.0.0.3 area 0
> network 172.0.255.12 0.0.0.3 area 0
> network 172.0.255.16 0.0.0.3 area 0
> network 172.0.255.32 0.0.0.3 area 0
> network 172.20.0.0 0.0.7.255 area 0
> network 172.20.12.0 0.0.0.3 area 0
> network 172.20.13.0 0.0.0.15 area 0
> !
> ip classless
> !
> ip http server
> !
> access-list 102 permit tcp host 172.20.0.2 host 192.168.254.254 eq ftp
> access-list 102 deny tcp host 172.20.0.2 host 192.168.254.254 eq
> 5190
> access-list 102 deny tcp host 172.20.0.2 host 192.168.254.254 eq
> 5050
> access-list 102 permit tcp host 172.20.0.2 host 192.168.254.254 eq www
> access-list 103 permit tcp host 172.20.8.2 host 192.168.254.254 eq www
> access-list 103 deny tcp host 172.20.8.2 host 192.168.254.254 eq
> 5050
> access-list 103 permit tcp host 172.20.8.2 host 192.168.254.254 eq ftp
> access-list 103 permit tcp host 172.20.12.2 host 192.168.254.254 eq
> www
> access-list 103 deny tcp host 172.20.8.2 host 192.168.254.254 eq
> 5190
> access-list 106 permit tcp host 172.20.12.2 host 192.168.254.254 eq
> ftp
> access-list 106 permit tcp host 172.20.12.2 host 192.168.254.254
> access-list 106 deny tcp host 172.20.12.2 host 192.168.254.254 eq
> 5190
> access-list 106 deny tcp host 172.20.12.2 host 192.168.254.254 eq
> 5050
> !
> control-plane
> !
> banner motd ^CCWelcome to RT1 ^C
> !
> line con 0
> password cisco
> login
> line aux 0
> line vty 0 4
> password cisco
> login
> !
> scheduler allocate 20000 1000
> end

nothing wrong with it on this router, what do all the other routers configs
look like?

From: Shurik on 20 May 2010 01:22
try to enable the logging in buffer and add the line "deny ip any any
log" in the end of every ACL. Then look "sh logg". Probably ACLs deny
OSPF.
From: Shurik on 20 May 2010 01:29
and try to change the line (network 172.20.12.0 0.0.0.3 area 0 ) on
the (network 172.20.12.0 0.0.0.255 area 0)
 | 
Pages: 1
Prev: Cisco ATM problem
Next: AQuA Powered Asterisk Voice Quality Monitoring Solution