Prev: gigaset fixes for 2.6.34-rc1
Next: fix callgraphs of 32-bit processes on 64-bit kernels.
From: J� Engel on 15 Mar 2010 11:40
Forgot to Cc: lkml.

On Mon, 15 March 2010 16:08:06 +0100, J�rn Engel wrote:
>
> Hello Robert!
>
> Looks like 353176888386d9025062a12dcec08d49af10cf2c broke one of my
> machines. Reverting that patch fixes things again. Machine is
> running an x86_64 kernel. Lspci gives me this:
>
> 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
> Subsystem: ASRock Incorporation Device 8136
> Flags: bus master, fast devsel, latency 0, IRQ 26
> I/O ports at e800 [size=256]
> Memory at fdeff000 (64-bit, prefetchable) [size=4K]
> Memory at fdee0000 (64-bit, prefetchable) [size=64K]
> [virtual] Expansion ROM at fde00000 [disabled] [size=128K]
> Capabilities: [40] Power Management version 3
> Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Capabilities: [70] Express Endpoint, MSI 01
> Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
> Capabilities: [cc] Vital Product Data
> Capabilities: [100] Advanced Error Reporting
> Capabilities: [140] Virtual Channel <?>
> Capabilities: [160] Device Serial Number 08-00-00-00-ff-ff-00-00
> Kernel driver in use: r8169
>
> If you have any test patches to try, please send them my way. :)
>
> J�rn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: J� Engel on 16 Mar 2010 04:40
On Mon, 15 March 2010 17:28:45 -0600, Robert Hancock wrote:
>
> What are the symptoms?

No more network. :)

According to ifconfig the interface is up and running. If I read
/sys/class/net/eth0 correctly, two packets have been sent and none
received. LED on network card and switch is off. mii-tool is
unhappy.

With patch in:
Bikini:~# mii-tool
No MII transceiver present!.

With patch reverted:
Bikini:~# mii-tool
eth0: negotiated 100baseTx-FD flow-control, link ok

I just noticed lspci is also unhappy.

With patch in:
Bikini:~# lspci -vv > lspci
pcilib: sysfs_read_vpd: read failed: Connection timed out.

With patch reverted:
Bikini:~# lspci -vv > lspci2
Bikini:~# diff -u lspci*
--- lspci 2010-03-16 09:03:02.000000000 +0100
+++ lspci2 2010-03-16 09:09:36.000000000 +0100
@@ -246,7 +246,7 @@
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
- Not readable
+ Unknown small resource type 00, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-

As you might expect, delta is part of the ethernet controller.

All "With patch in" output above is typed off the screen. Beware of
typos.

> Does setting use_dac=0 in the module options
> for r8169 also resolve the problem?

/sys/modules/r8169 does not exist. How odd. Anyway, simply changing
the default in r8169.c to 0 fixes the problems for me. Good call.

> Full dmesg and lspci -vv output might also be useful.

Both with patch in:
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.33 (joern(a)Dublin) (gcc version 4.3.3 (Debian 4.3.3-3) ) #40 SMP Tue Mar 16 09:01:02 CET 2010
[ 0.000000] Command line: vga=9 root=/dev/sda2 loglevel=9 netconsole=4444(a)192.168.0.39/eth0,6666(a)192.168.0.10/00:15:58:C5:ED:A8 BOOT_IMAGE=bzImage
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6b0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6b0000 - 00000000bf6c0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf6c0000 - 00000000bf6f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6f0000 - 00000000bf700000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf700000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf6b0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6b0000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6b0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6b0000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ 19000-1f000
[ 0.000000] ACPI: RSDP 00000000000f9f60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf6b0000 00040 (v01 040209 RSDT1650 20090402 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf6b0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf6b0440 05779 (v01 AS153 AS153151 00000151 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf6c0000 00040
[ 0.000000] ACPI: APIC 00000000bf6b0390 0006C (v01 040209 APIC1650 20090402 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf6b0400 0003C (v01 040209 OEMMCFG 20090402 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf6c0040 00071 (v01 040209 OEMB1650 20090402 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000bf6b5bc0 00027 (v01 040209 OEMAAFT 20090402 MSFT 00000097)
[ 0.000000] ACPI: GSCI 00000000bf6c00c0 02024 (v01 040209 GMCHSCI 20090402 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf6c2a10 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6b0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046079
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765672 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [1a000 - 1a7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf6b0000 - 00000000bf6c0000
[ 0.000000] PM: Registered nosave memory: 00000000bf6c0000 - 00000000bf6f0000
[ 0.000000] PM: Registered nosave memory: 00000000bf6f0000 - 00000000bf700000
[ 0.000000] PM: Registered nosave memory: 00000000bf700000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff380000
[ 0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bf700000 (gap: bf700000:3f600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff880002600000 s1918952 r8192 d22552 u2097152
[ 0.000000] pcpu-alloc: s1918952 r8192 d22552 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028159
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: vga=9 root=/dev/sda2 loglevel=9 netconsole=4444(a)192.168.0.39/eth0,6666(a)192.168.0.10/00:15:58:C5:ED:A8 BOOT_IMAGE=bzImage
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (56 early reservations)
[ 0.000000] #1 [0001000000 - 000241a810] TEXT DATA BSS
[ 0.000000] #2 [000241b000 - 000241b12b] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009e400 - 00000fcc20] BIOS reserved
[ 0.000000] #6 [00000fcd5c - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000fcc20 - 00000fcd5c] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #10 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #11 [0000019000 - 000001a000] PGTABLE
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #13 [000241b140 - 000241c140] BOOTMEM
[ 0.000000] #14 [000241a840 - 000241ab40] BOOTMEM
[ 0.000000] #15 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #16 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #17 [0100200000 - 0103a00000] MEMMAP 0
[ 0.000000] #18 [000241c140 - 000241c640] BOOTMEM
[ 0.000000] #19 [000241c640 - 000246c640] BOOTMEM
[ 0.000000] #20 [000246c640 - 0002480640] BOOTMEM
[ 0.000000] #21 [0002481000 - 0002482000] BOOTMEM
[ 0.000000] #22 [000241ab40 - 000241ab83] BOOTMEM
[ 0.000000] #23 [000241abc0 - 000241ae60] BOOTMEM
[ 0.000000] #24 [000241ae80 - 000241aee8] BOOTMEM
[ 0.000000] #25 [000241af00 - 000241af68] BOOTMEM
[ 0.000000] #26 [000241af80 - 000241afe8] BOOTMEM
[ 0.000000] #27 [0002480640 - 00024806a8] BOOTMEM
[ 0.000000] #28 [00024806c0 - 0002480728] BOOTMEM
[ 0.000000] #29 [0002480740 - 00024807a8] BOOTMEM
[ 0.000000] #30 [00024807c0 - 0002480828] BOOTMEM
[ 0.000000] #31 [0002480840 - 00024808a8] BOOTMEM
[ 0.000000] #32 [00024808c0 - 0002480928] BOOTMEM
[ 0.000000] #33 [0002480940 - 00024809a8] BOOTMEM
[ 0.000000] #34 [00024809c0 - 0002480a28] BOOTMEM
[ 0.000000] #35 [0002480a40 - 0002480a60] BOOTMEM
[ 0.000000] #36 [0002480a80 - 0002480aa0] BOOTMEM
[ 0.000000] #37 [0002480ac0 - 0002480b3a] BOOTMEM
[ 0.000000] #38 [0002480b40 - 0002480bba] BOOTMEM
[ 0.000000] #39 [0002600000 - 00027dc000] BOOTMEM
[ 0.000000] #40 [0002800000 - 00029dc000] BOOTMEM
[ 0.000000] #41 [0002a00000 - 0002bdc000] BOOTMEM
[ 0.000000] #42 [0002c00000 - 0002ddc000] BOOTMEM
[ 0.000000] #43 [0002480bc0 - 0002480bc8] BOOTMEM
[ 0.000000] #44 [0002480c00 - 0002480c08] BOOTMEM
[ 0.000000] #45 [0002480c40 - 0002480c50] BOOTMEM
[ 0.000000] #46 [0002480c80 - 0002480ca0] BOOTMEM
[ 0.000000] #47 [0002480cc0 - 0002480e10] BOOTMEM
[ 0.000000] #48 [0002480e40 - 0002480ec0] BOOTMEM
[ 0.000000] #49 [0002480ec0 - 0002480f40] BOOTMEM
[ 0.000000] #50 [0002482000 - 000248a000] BOOTMEM
[ 0.000000] #51 [000248a000 - 000248a240] BOOTMEM
[ 0.000000] #52 [0002ddc000 - 0006ddc000] BOOTMEM
[ 0.000000] #53 [000248a240 - 00024aa240] BOOTMEM
[ 0.000000] #54 [00024aa240 - 00024ea240] BOOTMEM
[ 0.000000] #55 [000001a800 - 0000022800] BOOTMEM
[ 0.000000] 23 40 - 80 9e
[ 0.000000] 100 100 - 1000 1000
[ 0.000000] 24eb 2500 - 2600 2600
[ 0.000000] 27dc - 2800
[ 0.000000] 29dc - 2a00
[ 0.000000] 2bdc - 2c00
[ 0.000000] 6ddc 6e00 - bf680 bf6b0
[ 0.000000] 100007 100040 - 100200 100200
[ 0.000000] 103a00 103a00 - 140000 140000
[ 0.000000] Memory: 4032292k/5242880k available (3411k kernel code, 1058564k absent, 152024k reserved, 3689k data, 2556k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] ODEBUG: 11 of 11 active objects replaced
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2880.133 MHz processor.
[ 0.004030] Calibrating delay loop (skipped), value calculated using timer frequency.. 5760.26 BogoMIPS (lpj=11520532)
[ 0.004700] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008489] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009422] Mount-cache hash table entries: 256
[ 0.010361] Initializing cgroup subsys ns
[ 0.010368] Initializing cgroup subsys cpuacct
[ 0.010382] Initializing cgroup subsys devices
[ 0.010479] CPU: Physical Processor ID: 0
[ 0.010483] CPU: Processor Core ID: 0
[ 0.010488] mce: CPU supports 6 MCE banks
[ 0.010496] CPU0: Thermal monitoring enabled (TM2)
[ 0.010506] using mwait in idle threads.
[ 0.010510] Performance Events: Core2 events, Intel PMU driver.
[ 0.010524] ... version: 2
[ 0.010527] ... bit width: 40
[ 0.010530] ... generic registers: 2
[ 0.010534] ... value mask: 000000ffffffffff
[ 0.010538] ... max period: 000000007fffffff
[ 0.010541] ... fixed-purpose events: 3
[ 0.010544] ... event mask: 0000000700000003
[ 0.011517] ACPI: Core revision 20100121
[ 0.028016] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.028024] ftrace: allocating 14208 entries in 56 pages
[ 0.032154] Setting APIC routing to flat
[ 0.032565] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075613] CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 0a
[ 0.076000] lockdep: fixing up alternatives.
[ 0.076000] Booting Node 0, Processors #1
[ 0.164047] Brought up 2 CPUs
[ 0.164054] Total of 2 processors activated (11519.94 BogoMIPS).
[ 0.164753] khelper used greatest stack depth: 5888 bytes left
[ 0.164753] NET: Registered protocol family 16
[ 0.164753] ACPI: bus type pci registered
[ 0.164753] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.164753] PCI: not using MMCONFIG
[ 0.164753] PCI: Using configuration type 1 for base access
[ 0.164753] khelper used greatest stack depth: 5808 bytes left
[ 0.172140] bio: create slab <bio-0> at 0
[ 0.182217] ACPI: EC: Look up EC in DSDT
[ 0.190712] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.205132] ACPI: Interpreter enabled
[ 0.205137] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.205224] ACPI: Using IOAPIC for interrupt routing
[ 0.205312] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.212093] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.328031] ACPI: No dock devices found.
[ 0.328040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.328755] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.328991] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.328991] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0xbf700000-0xdfffffff]
[ 0.328991] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.328991] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
[ 0.328991] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
[ 0.328991] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.328991] pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff]
[ 0.328991] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.328991] pci 0000:00:1c.0: PME# disabled
[ 0.329041] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.329049] pci 0000:00:1c.1: PME# disabled
[ 0.329129] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.329208] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
[ 0.329286] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
[ 0.329366] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
[ 0.329442] pci 0000:00:1d.7: reg 10: [mem 0xfea77c00-0xfea77fff]
[ 0.329522] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.329530] pci 0000:00:1d.7: PME# disabled
[ 0.329726] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.329735] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.329743] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.329750] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.329758] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 003f)
[ 0.329824] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.329835] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.329846] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.329856] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.329867] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.329928] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
[ 0.329938] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.329948] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.329958] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
[ 0.329968] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f]
[ 0.330010] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.330016] pci 0000:00:1f.2: PME# disabled
[ 0.330085] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.330192] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.330199] pci 0000:00:1c.0: bridge window [io f000 - 0000] reg reading
[ 0.330207] pci 0000:00:1c.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
[ 0.330219] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.330329] pci 0000:01:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.330359] pci 0000:01:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.330381] pci 0000:01:00.0: reg 20: [mem 0xfdee0000-0xfdeeffff 64bit pref]
[ 0.330395] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.330454] pci 0000:01:00.0: supports D1 D2
[ 0.330458] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330467] pci 0000:01:00.0: PME# disabled
[ 0.330500] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[ 0.330507] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.330515] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.330526] pci 0000:00:1c.1: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.330638] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.330646] pci 0000:00:1e.0: bridge window [io f000 - 0000] reg reading
[ 0.330654] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 0x000fffff] reg reading
[ 0.330666] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
[ 0.330672] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.330678] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.330683] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.330690] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.330696] pci 0000:00:1e.0: bridge window [mem 0xbf700000-0xdfffffff] (subtractive decode)
[ 0.330702] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.330733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.332114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.332536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.332681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.357702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.357702] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.357702] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.357702] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.357702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.357702] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.357702] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.357702] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.360218] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.360218] vgaarb: loaded
[ 0.360347] SCSI subsystem initialized
[ 0.360347] libata version 3.00 loaded.
[ 0.360347] usbcore: registered new interface driver usbfs
[ 0.360347] usbcore: registered new interface driver hub
[ 0.360347] usbcore: registered new device driver usb
[ 0.360347] PCI: Using ACPI for IRQ routing
[ 0.360347] PCI: pci_cache_line_size set to 64 bytes
[ 0.360347] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.360347] reserve RAM buffer: 00000000bf6b0000 - 00000000bfffffff
[ 0.360347] hpet clockevent registered
[ 0.360347] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.360347] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.360347] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.372049] Switching to clocksource tsc
[ 0.378630] pnp: PnP ACPI init
[ 0.378664] ACPI: bus type pnp registered
[ 0.386324] pnp: PnP ACPI: found 13 devices
[ 0.386329] ACPI: ACPI bus type pnp unregistered
[ 0.386350] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.386369] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.386375] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.386380] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.386385] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.386391] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.386396] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.386412] system 00:08: [mem 0xffc00000-0xfff7ffff] has been reserved
[ 0.386432] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.386438] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.386453] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.386467] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.386483] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.386489] system 00:0c: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.386496] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.386503] system 00:0c: [mem 0x00100000-0xbf6fffff] could not be reserved
[ 0.392112] PCI: max bus depth: 1 pci_try_num: 2
[ 0.392155] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbf700000-0xbfafffff]
[ 0.392163] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.392168] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.392174] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.392183] pci 0000:00:1c.0: bridge window [mem 0xbf700000-0xbfafffff]
[ 0.392191] pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.392204] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.392210] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
[ 0.392216] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.392225] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.392232] pci 0000:00:1c.1: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.392244] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.392248] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.392257] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.392264] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.392284] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.392299] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.392307] pci 0000:00:1c.0: setting latency timer to 64
[ 0.392325] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.392333] pci 0000:00:1c.1: setting latency timer to 64
[ 0.392345] pci 0000:00:1e.0: setting latency timer to 64
[ 0.392351] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.392355] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.392359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392364] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.392368] pci_bus 0000:00: resource 8 [mem 0xbf700000-0xdfffffff]
[ 0.392372] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.392377] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.392381] pci_bus 0000:02: resource 1 [mem 0xbf700000-0xbfafffff]
[ 0.392385] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.392391] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.392395] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.392399] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.392405] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.392409] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.392413] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392417] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.392422] pci_bus 0000:03: resource 8 [mem 0xbf700000-0xdfffffff]
[ 0.392426] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.392542] NET: Registered protocol family 2
[ 0.392892] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.394859] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.398800] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
[ 0.404716] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.404775] TCP reno registered
[ 0.404833] UDP hash table entries: 2048 (order: 6, 327680 bytes)
[ 0.405251] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
[ 0.405946] NET: Registered protocol family 1
[ 0.405987] pci 0000:00:02.0: Boot video device
[ 0.406165] PCI: CLS 32 bytes, default 64
[ 0.417956] DMA-API: preallocated 32768 debug entries
[ 0.417965] DMA-API: debugging enabled by kernel config
[ 0.417971] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.417977] Placing 64MB software IO TLB between ffff880002ddc000 - ffff880006ddc000
[ 0.417983] software IO TLB at phys 0x2ddc000 - 0x6ddc000
[ 0.420717] audit: initializing netlink socket (disabled)
[ 0.420763] type=2000 audit(1268726481.419:1): initialized
[ 0.421241] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.421938] msgmni has been set to 7875
[ 0.422898] cryptomgr_test used greatest stack depth: 5352 bytes left
[ 0.422962] alg: No test for stdrng (krng)
[ 0.423105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.423124] io scheduler noop registered
[ 0.423128] io scheduler deadline registered
[ 0.423160] io scheduler cfq registered (default)
[ 0.423484] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.423551] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.424181] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.424244] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.426515] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011580000, using 3750k, total 8128k
[ 0.426522] vesafb: mode is 1600x1200x8, linelength=1600, pages=3
[ 0.426526] vesafb: scrolling: redraw
[ 0.426529] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.444667] Console: switching to colour frame buffer device 200x75
[ 0.462236] fb0: VESA VGA frame buffer device
[ 0.463660] ACPI: SSDT 00000000bf6c20f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.466926] ACPI: SSDT 00000000bf6c2580 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.484133] intel_rng: FWH not detected
[ 0.484265] Linux agpgart interface v0.103
[ 0.484463] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 0.485627] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 0.495395] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.495610] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.501851] brd: module loaded
[ 0.504130] loop: module loaded
[ 0.504466] ata_piix 0000:00:1f.1: version 2.13
[ 0.504554] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.504747] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.504984] scsi0 : ata_piix
[ 0.505336] scsi1 : ata_piix
[ 0.510141] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.510238] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.510394] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.510496] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.510645] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.510829] scsi2 : ata_piix
[ 0.511214] scsi3 : ata_piix
[ 0.516880] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
[ 0.516979] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
[ 0.517340] tun: Universal TUN/TAP device driver, 1.6
[ 0.517411] tun: (C) 1999-2004 Max Krasnyansky <maxk(a)qualcomm.com>
[ 0.517634] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.517731] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.517853] r8169 0000:01:00.0: (unregistered net_device): using 64-bit DMA
[ 0.517975] r8169 0000:01:00.0: setting latency timer to 64
[ 0.518121] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[ 0.518411] khelper used greatest stack depth: 5136 bytes left
[ 0.518989] r8169 0000:01:00.0: eth0: RTL8102e at 0xffffc9000063e000, 00:19:66:ca:2c:7f, XID 04a00000 IRQ 26
[ 0.521192] netconsole: local port 4444
[ 0.521247] netconsole: local IP 192.168.0.39
[ 0.521307] netconsole: interface eth0
[ 0.521359] netconsole: remote port 6666
[ 0.521413] netconsole: remote IP 192.168.0.10
[ 0.521475] netconsole: remote ethernet address 00:15:58:c5:ed:a8
[ 0.521564] netconsole: device eth0 not up yet, forcing it
[ 0.523389] r8169 0000:01:00.0: eth0: link down
[ 0.523453] r8169 0000:01:00.0: eth0: link down
[ 0.683957] ata4.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102HB, max UDMA/133
[ 0.684071] ata4.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691795] ata4.00: configured for UDMA/133
[ 0.699881] ata3.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133
[ 0.699997] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.715852] ata3.00: configured for UDMA/133
[ 0.716480] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5
[ 0.720035] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 0.720618] scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5
[ 0.721050] sd 3:0:0:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 0.721222] sd 3:0:0:0: [sdb] Write Protect is off
[ 0.721224] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.721293] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.721833] sdb: unknown partition table
[ 0.742050] sd 2:0:0:0: [sda] Write Protect is off
[ 0.742549] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 0.748771] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.752242] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.756154] sda: sda1 sda2 sda3
[ 0.780333] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.736062] async/3 used greatest stack depth: 4776 bytes left
[ 1.739753] async/2 used greatest stack depth: 4720 bytes left
[ 4.528033] netconsole: timeout waiting for carrier
[ 6.156819] console [netcon0] enabled
[ 6.156820] netconsole: network logging started
[ 6.157229] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.157286] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.157320] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.157324] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.157793] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.157860] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 6.157874] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.161767] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 6.161803] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00
[ 6.176032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.176180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.176182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.176183] usb usb1: Product: EHCI Host Controller
[ 6.176184] usb usb1: Manufacturer: Linux 2.6.33 ehci_hcd
[ 6.176185] usb usb1: SerialNumber: 0000:00:1d.7
[ 6.176831] hub 1-0:1.0: USB hub found
[ 6.176860] hub 1-0:1.0: 8 ports detected
[ 6.177512] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.202365] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.202374] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.202378] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.202540] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.202575] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 6.202667] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.202669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.202671] usb usb2: Product: UHCI Host Controller
[ 6.202672] usb usb2: Manufacturer: Linux 2.6.33 uhci_hcd
[ 6.202673] usb usb2: SerialNumber: 0000:00:1d.0
[ 6.202988] hub 2-0:1.0: USB hub found
[ 6.203030] hub 2-0:1.0: 2 ports detected
[ 6.203335] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.203344] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.203347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.203508] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 6.203544] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 6.203639] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.203641] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.203642] usb usb3: Product: UHCI Host Controller
[ 6.203643] usb usb3: Manufacturer: Linux 2.6.33 uhci_hcd
[ 6.203645] usb usb3: SerialNumber: 0000:00:1d.1
[ 6.203962] hub 3-0:1.0: USB hub found
[ 6.203974] hub 3-0:1.0: 2 ports detected
[ 6.204275] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.204284] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.204287] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.204447] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 6.204499] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 6.204595] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.204597] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.204599] usb usb4: Product: UHCI Host Controller
[ 6.204600] usb usb4: Manufacturer: Linux 2.6.33 uhci_hcd
[ 6.204601] usb usb4: SerialNumber: 0000:00:1d.2
[ 6.204978] hub 4-0:1.0: USB hub found
[ 6.204989] hub 4-0:1.0: 2 ports detected
[ 6.205269] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 6.205278] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 6.205281] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.205448] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 6.205498] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 6.205597] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.205599] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.205600] usb usb5: Product: UHCI Host Controller
[ 6.205601] usb usb5: Manufacturer: Linux 2.6.33 uhci_hcd
[ 6.205602] usb usb5: SerialNumber: 0000:00:1d.3
[ 6.205912] hub 5-0:1.0: USB hub found
[ 6.205924] hub 5-0:1.0: 2 ports detected
[ 6.206303] Initializing USB Mass Storage driver...
[ 6.206428] usbcore: registered new interface driver usb-storage
[ 6.206429] USB Mass Storage support registered.
[ 6.206889] PNP: No PS/2 controller found. Probing ports directly.
[ 6.251877] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.251903] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.252259] mice: PS/2 mouse device common for all mice
[ 6.252393] rtc_cmos 00:03: RTC can wake from S4
[ 6.252606] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.252637] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.446711] cpuidle: using governor ladder
[ 6.446714] cpuidle: using governor menu
[ 6.449762] usbcore: registered new interface driver hiddev
[ 6.449873] usbcore: registered new interface driver usbhid
[ 6.449874] usbhid: USB HID core driver
[ 6.450050] oprofile: using NMI interrupt.
[ 6.469847] TCP cubic registered
[ 6.469851] NET: Registered protocol family 17
[ 6.499369] registered taskstats version 1
[ 6.503448] rtc_cmos 00:03: setting system clock to 2010-03-16 08:01:28 UTC (1268726488)
[ 6.539784] EXT3-fs (sda2): recovery required on readonly filesystem
[ 6.543559] EXT3-fs (sda2): write access will be enabled during recovery
[ 6.587902] kjournald starting. Commit interval 5 seconds
[ 6.591792] EXT3-fs (sda2): recovery complete
[ 6.596352] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 6.600318] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[ 6.604202] Freeing unused kernel memory: 2556k freed
[ 6.609265] Write protecting the kernel read-only data: 6144k
[ 6.613463] Freeing unused kernel memory: 664k freed
[ 6.617826] Freeing unused kernel memory: 332k freed
[ 6.860063] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 7.115503] usb 3-2: New USB device found, idVendor=1241, idProduct=1503
[ 7.119525] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.123498] usb 3-2: Product: USB Keyboard
[ 7.127376] usb 3-2: Manufacturer:
[ 7.181976] input: USB Keyboard as /class/input/input0
[ 7.186467] generic-usb 0003:1241:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-2/input0
[ 7.274776] input: USB Keyboard as /class/input/input1
[ 7.279002] generic-usb 0003:1241:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-2/input1
[ 7.338603] stty used greatest stack depth: 3744 bytes left
[ 7.724093] touch used greatest stack depth: 3664 bytes left
[ 8.919804] egrep used greatest stack depth: 3344 bytes left
[ 10.713241] EXT3-fs (sda2): using internal journal
[ 11.708808] kjournald starting. Commit interval 5 seconds
[ 11.713511] EXT3-fs (sda1): using internal journal
[ 11.718095] EXT3-fs (sda1): mounted filesystem with writeback data mode
[ 12.975258] rc used greatest stack depth: 3136 bytes left

lspci -vv:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
Subsystem: ASRock Incorporation Device 29c0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device 29c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: bf700000-bfafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 11, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4149
Capabilities: [90] Subsystem: ASRock Incorporation Device 27d0
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000fde00000-00000000fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4151
Capabilities: [90] Subsystem: ASRock Incorporation Device 27d2
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 27c8
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 27c9
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 27ca
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 27cb
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device 27cc
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fea77c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: ASRock Incorporation Device 244e

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: ASRock Incorporation Device 27b8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 27df
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix

00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASRock Incorporation Device 27c0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: ASRock Incorporation Device 27da
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Subsystem: ASRock Incorporation Device 8136
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fdeff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdee0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4169
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Not readable
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 08-00-00-00-ff-ff-00-00
Kernel driver in use: r8169

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: J� Engel on 18 Mar 2010 05:10
On Wed, 17 March 2010 21:52:06 +0100, Francois Romieu wrote:
> On Tue, Mar 16, 2010 at 09:35:01AM +0100, J�rn Engel wrote:
> [...]
> > I just noticed lspci is also unhappy.
> >
> > With patch in:
> > Bikini:~# lspci -vv > lspci
> > pcilib: sysfs_read_vpd: read failed: Connection timed out.
> >
> > With patch reverted:
> > Bikini:~# lspci -vv > lspci2
> > Bikini:~# diff -u lspci*
> > --- lspci 2010-03-16 09:03:02.000000000 +0100
> > +++ lspci2 2010-03-16 09:09:36.000000000 +0100
> > @@ -246,7 +246,7 @@
> > Vector table: BAR=4 offset=00000000
> > PBA: BAR=4 offset=00000800
> > Capabilities: [cc] Vital Product Data
> > - Not readable
> > + Unknown small resource type 00, will not decode more.
>
> Neither looks good.

Agreed.

> Did lspci output look different with an older kernel ?

Yes. The relevant hunk is this one. Different obviously doesn't
mean better. :)

@@ -223,7 +221,7 @@
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4169
+ Address: 00000000fee0300c Data: 4179
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-

And for completeness he is the full diff. The machine was bought on
16 Jun 2009, so this is the oldest kernel I have. If you want any
specific kernels tested, please tell me which ones.

Bikini:~# uname -a
Linux Bikini 2.6.31-rc2 #193 SMP Sun Mar 14 17:00:08 CET 2010 x86_64 GNU/Linux
Bikini:~# lspci -vv > lspci3
Bikini:~# diff -u lspci[23]
--- lspci2 2010-03-16 09:09:46.000000000 +0100
+++ lspci3 2010-03-18 09:49:21.000000000 +0100
@@ -24,14 +24,12 @@
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00001000-00001fff
- Memory behind bridge: bf700000-bfafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
+ Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
@@ -56,14 +54,14 @@
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4149
+ Address: fee0300c Data: 4159
Capabilities: [90] Subsystem: ASRock Incorporation Device 27d0
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
- Kernel driver in use: pcieport
+ Kernel driver in use: pcieport-driver

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
@@ -98,14 +96,14 @@
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4151
+ Address: fee0300c Data: 4161
Capabilities: [90] Subsystem: ASRock Incorporation Device 27d2
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
- Kernel driver in use: pcieport
+ Kernel driver in use: pcieport-driver

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: ASRock Incorporation Device 27c8
@@ -223,7 +221,7 @@
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4169
+ Address: 00000000fee0300c Data: 4179
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: J� Engel on 26 Mar 2010 05:20
On Thu, 25 March 2010 18:56:03 -0600, Robert Hancock wrote:
>
> Francois, ping? Is there anyone else that has access to this kind of
> information about these chips?
>
> It's kind of interesting that there's only been one report of this
> though. Either the affected chips are rare among people testing
> 2.6.34-rc or there's something more to this. Maybe something
> wierd/unusual about Jörn's system?
>
> Jörn, are any other devices on your system working with 64-bit
> addressing? Try doing this:
>
> find /sys -name "*dma_mask_bits*" | xargs cat
>
> Does anything show more than 32?

I've slightly changed the command:
# for i in `find /sys -name "*dma_mask_bits*"`; do echo -n "$i: "; cat $i; done
/sys/devices/pci0000:00/0000:00:00.0/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:00.0/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:02.0/dma_mask_bits: 36
/sys/devices/pci0000:00/0000:00:02.0/consistent_dma_mask_bits: 36
/sys/devices/pci0000:00/0000:00:1c.0/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1c.0/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1c.1/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1c.1/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1c.1/0000:01:00.0/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1c.1/0000:01:00.0/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.0/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.0/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.1/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.1/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.2/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.2/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.3/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.3/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.7/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1d.7/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1e.0/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1e.0/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.0/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.0/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.1/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.1/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.2/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.2/consistent_dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.3/dma_mask_bits: 32
/sys/devices/pci0000:00/0000:00:1f.3/consistent_dma_mask_bits: 32

One device, which should be this one:
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)

J�rn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
From: J� Engel on 27 Mar 2010 02:40
On Fri, 26 March 2010 19:55:44 -0600, Robert Hancock wrote:
>
> Well, that one's 36 bits, but it's unclear whether that driver would
> actually be likely to access anything over 4GB. It's possible that
> there's just some general problem with 64-bit DMA on that machine.

That may very well be. I've had trouble using a PCIe card in that
machine as well. "Solution" was to buy a different computer. Sad, I
know, but not my money.

> The fact that even stuff like lspci and MII is breaking seems odd,
> though. It could be that model of card doesn't like the PCIDAC register
> bit being set (maybe it means something different on that model, or
> something).
>
> I suppose a publicly accessible datasheet for these chips is too much to
> hope for?

Which chips?

J�rn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo(a)vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
 |  Next  |  Last
Pages: 1 2
Prev: gigaset fixes for 2.6.34-rc1
Next: fix callgraphs of 32-bit processes on 64-bit kernels.