From: Rod Speed on
june <june(a)june.com> wrote:
> Rod Speed wrote:
>> june <june(a)june.com> wrote:
>>> june wrote:
>>>> Hi
>>>>
>>>> had a few pc issues recently
>>>>
>>>> so went for a full format of the c: partition
>>>> and full load from scratch
>>>>
>>>> then after about 6 backups later - so pc fully loaded
>>>>
>>>> acronis failed to start up - didnt think anything of it
>>>>
>>>> was ok after
>>>>
>>>> had a printer install hang - so had a forced reboot
>>>>
>>>> so decided to go backto the image before the printer to be extra
>>>> clean acronis said image corrupt - oh dear . . .
>>>>
>>>> anyway - if i boot up from the acronis boot cd - all images verify
>>>> so i reinstalled back to the one it wouldnt do before
>>>>
>>>> pc back to normal
>>>>
>>>> but every time i do a checkdisk it always finds a few minor errors
>>>>
>>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>>
>>>> but its every time
>>>>
>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>>> the sata cable ?
>>>>
>>>>
>>>> any ideas welcome
>>>>
>>>> thanks
>>>>
>>>
>>> from speedfan smart readings
>>>
>>> Attribute Current Raw Overall
>>> Raw Read Error Rate 100 0 Normal
>>> 3Spin Up Time 77 7640 Normal
>>> Start/Stop Count 100 217 Very good
>>> Reallocated Sector Count100 0 Very good
>>> Seek Error Rate 253 0 Very good
>>> Seek Time Performance 100 0 Very good
>>> Power On Hours Count 100 556 Very good
>>> Spin Retry Count 100 0 Very good
>>> Calibration Retry Count 100 0 Very good
>>> Power Cycle Count 100 214 Very good
>>> Read Soft Error Rate 100 0 Normal
>>> Unknown attribute 183 100 0 Very good
>>> Unknown attribute 184 100 0 Very good
>>> Unknown attribute 187 100 0 Very good
>>> Unknown attribute 188 100 0 Very good
>>> Airflow Temperature 74 437321754 Good
>>> Hardware ECC Recovered 100 166714 Very good
>>> Reallocated Event Count 100 0 Very good
>>> Current Pending Sector 100 0 Very good
>>> Offline Uncorrectable Sector Count 100 0 Very good
>>> Ultra DMA CRC Error Rate 100 0 Normal
>>> Write Error Rate 100 0 Normal
>>> Soft Read Error Rate 253 0 Very good
>>
>> The hard drive looks fine.
>>
>> Is there anything useful in the system logs ?
>>
>> You dont say what OS you are using.
>>
>>
>
> hi
>
> xp pro sp3
>
>
> error code
> ==========
>
> 32 (0x70020) date time The archive is corrupted: None
>
>
> 502 (0x101F6) date time Operation with partition "0-0" was
> terminated details image corruption (0x70020)
> tag = 0xF5F8CBCF76155638

I meant the XP system logs, not the TI logs.


> not checked disk for a day :) - so might do tomorrow
>
>
> the big tag show sup on google but in foreign
>
> http://www.google.co.uk/search?q=0xF5F8CBCF76155638&hl=en&safe=off&client=firefox-a&channel=s&rls=org.mozilla:en-US:official&hs=sn4&filter=0


From: june on
Rod Speed wrote:
> june <june(a)june.com> wrote:
>> Rod Speed wrote:
>>> june <june(a)june.com> wrote:
>>>> june wrote:
>>>>> Hi
>>>>>
>>>>> had a few pc issues recently
>>>>>
>>>>> so went for a full format of the c: partition
>>>>> and full load from scratch
>>>>>
>>>>> then after about 6 backups later - so pc fully loaded
>>>>>
>>>>> acronis failed to start up - didnt think anything of it
>>>>>
>>>>> was ok after
>>>>>
>>>>> had a printer install hang - so had a forced reboot
>>>>>
>>>>> so decided to go backto the image before the printer to be extra
>>>>> clean acronis said image corrupt - oh dear . . .
>>>>>
>>>>> anyway - if i boot up from the acronis boot cd - all images verify
>>>>> so i reinstalled back to the one it wouldnt do before
>>>>>
>>>>> pc back to normal
>>>>>
>>>>> but every time i do a checkdisk it always finds a few minor errors
>>>>>
>>>>> i know in it self they are nothing - e.g. unused indexes etc.
>>>>>
>>>>> but its every time
>>>>>
>>>>> it leaves me with an uneasy feeling - wondering if its HD or maybe
>>>>> the sata cable ?
>>>>>
>>>>>
>>>>> any ideas welcome
>>>>>
>>>>> thanks
>>>>>
>>>> from speedfan smart readings
>>>>
>>>> Attribute Current Raw Overall
>>>> Raw Read Error Rate 100 0 Normal
>>>> 3Spin Up Time 77 7640 Normal
>>>> Start/Stop Count 100 217 Very good
>>>> Reallocated Sector Count100 0 Very good
>>>> Seek Error Rate 253 0 Very good
>>>> Seek Time Performance 100 0 Very good
>>>> Power On Hours Count 100 556 Very good
>>>> Spin Retry Count 100 0 Very good
>>>> Calibration Retry Count 100 0 Very good
>>>> Power Cycle Count 100 214 Very good
>>>> Read Soft Error Rate 100 0 Normal
>>>> Unknown attribute 183 100 0 Very good
>>>> Unknown attribute 184 100 0 Very good
>>>> Unknown attribute 187 100 0 Very good
>>>> Unknown attribute 188 100 0 Very good
>>>> Airflow Temperature 74 437321754 Good
>>>> Hardware ECC Recovered 100 166714 Very good
>>>> Reallocated Event Count 100 0 Very good
>>>> Current Pending Sector 100 0 Very good
>>>> Offline Uncorrectable Sector Count 100 0 Very good
>>>> Ultra DMA CRC Error Rate 100 0 Normal
>>>> Write Error Rate 100 0 Normal
>>>> Soft Read Error Rate 253 0 Very good
>>> The hard drive looks fine.
>>>
>>> Is there anything useful in the system logs ?
>>>
>>> You dont say what OS you are using.
>>>
>>>
>> hi
>>
>> xp pro sp3
>>
>>
>> error code
>> ==========
>>
>> 32 (0x70020) date time The archive is corrupted: None
>>
>>
>> 502 (0x101F6) date time Operation with partition "0-0" was
>> terminated details image corruption (0x70020)
>> tag = 0xF5F8CBCF76155638
>
> I meant the XP system logs, not the TI logs.
>
>
>> not checked disk for a day :) - so might do tomorrow
>>
>>
>> the big tag show sup on google but in foreign
>>
>> http://www.google.co.uk/search?q=0xF5F8CBCF76155638&hl=en&safe=off&client=firefox-a&channel=s&rls=org.mozilla:en-US:official&hs=sn4&filter=0
>
>


this is the HP printer hang

Faulting application autorun.exe, version 6.0.0.0, faulting module
autorun.exe, version 6.0.0.0, fault address 0x0000ea61.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


From: Arno Wagner on
Previously june <june(a)june.com> wrote:
> june wrote:
>> Hi
>>
>> had a few pc issues recently
>>
>> so went for a full format of the c: partition
>> and full load from scratch
>>
>> then after about 6 backups later - so pc fully loaded
>>
>> acronis failed to start up - didnt think anything of it
>>
>> was ok after
>>
>> had a printer install hang - so had a forced reboot
>>
>> so decided to go backto the image before the printer to be extra clean
>>
>> acronis said image corrupt - oh dear . . .
>>
>> anyway - if i boot up from the acronis boot cd - all images verify
>> so i reinstalled back to the one it wouldnt do before
>>
>> pc back to normal
>>
>> but every time i do a checkdisk it always finds a few minor errors
>>
>> i know in it self they are nothing - e.g. unused indexes etc.
>>
>> but its every time
>>
>> it leaves me with an uneasy feeling - wondering if its HD or maybe the
>> sata cable ?
>>
>>
>> any ideas welcome
>>
>> thanks
>>


> from speedfan smart readings

> Attribute Current Raw Overall
> Raw Read Error Rate 100 0 Normal
> 3Spin Up Time 77 7640 Normal
> Start/Stop Count 100 217 Very good
> Reallocated Sector Count100 0 Very good
> Seek Error Rate 253 0 Very good
> Seek Time Performance 100 0 Very good
> Power On Hours Count 100 556 Very good
> Spin Retry Count 100 0 Very good
> Calibration Retry Count 100 0 Very good
> Power Cycle Count 100 214 Very good
> Read Soft Error Rate 100 0 Normal
> Unknown attribute 183 100 0 Very good
> Unknown attribute 184 100 0 Very good
> Unknown attribute 187 100 0 Very good
> Unknown attribute 188 100 0 Very good
> Airflow Temperature 74 437321754 Good
> Hardware ECC Recovered 100 166714 Very good
> Reallocated Event Count 100 0 Very good
> Current Pending Sector 100 0 Very good
> Offline Uncorrectable Sector Count 100 0 Very good
> Ultra DMA CRC Error Rate 100 0 Normal
> Write Error Rate 100 0 Normal
> Soft Read Error Rate 253 0 Very good


The disk is fine and so is the cable. Maybe some pice of intrusive
spyware or a virus?

Arno