Prev: error code 8024e001
Next: vista service pack 1
From: AGonos on 16 Sep 2008 03:38
Thanks for your attempt to help. But I have already done this to no help at
all.
I did try registering the dll and retried but no help.
And I have not repaired my installation.

Although the windows update site responds with no error and does not log any
info in the history log, i found some error messages in the log files in the
winows directory.

These read:

2008-09-15 18:11:31:039 808 c30 Agent *************
2008-09-15 18:11:31:039 808 c30 Agent ** START ** Agent: Installing
updates [CallerId = MicrosoftUpdate]
2008-09-15 18:11:31:039 808 c30 Agent *********
2008-09-15 18:11:31:039 808 c30 Agent * Updates to install = 1
2008-09-15 18:11:31:049 2796 b1c COMAPI - Updates to install = 1
2008-09-15 18:11:31:059 2796 b1c COMAPI <<-- SUBMITTED -- COMAPI: Install
[ClientId = MicrosoftUpdate]
2008-09-15 18:11:31:510 808 c30 Agent * Title = MITAC TECHNOLOGY CORP.
- Input Devices - Remove Control Device V1.0.0.2
2008-09-15 18:11:31:510 808 c30 Agent * UpdateId =
{F43112B3-DAA5-48CA-956B-BA3EE8D3F0B0}.100
2008-09-15 18:11:34:925 808 5c4 Report REPORT EVENT:
{E386019B-0160-4409-808C-BA0954EA992B} 2008-09-15
18:11:29:928+0300 1 162 101 {F43112B3-DAA5-48CA-956B-BA3EE8D3F0B0} 100 0 MicrosoftUpdate Success Content Download Download succeeded.
2008-09-15 18:14:26:652 808 c30 Service WARNING: GetUserTokenFromSessionId
failed with error 800704dd for session 0
2008-09-15 18:14:28:034 808 c30 Agent * WARNING: Exit code = 0x80240020
2008-09-15 18:14:28:034 808 c30 Agent *********
2008-09-15 18:14:28:034 808 c30 Agent ** END ** Agent: Installing
updates [CallerId = MicrosoftUpdate]
2008-09-15 18:14:28:044 808 c30 Agent *************



OK it is difficult to see in a small space but the point is :
WARNING: GetUserTokenFromSessionId failed with error 800704dd for session 0
2008-09-15 18:14:28:034 808 c30 Agent * WARNING: Exit code = 0x80240020

So looked in here with these error codes and found a suggestion for some
registry info that might be missing!
indeed they were missing the whole key senslogn under
HK_LM\software\microsoft\windows nt\currentversion\winlogon\notify
I cannot point you to the article I found but if someone needs it I can look
for it again.

So I followed those steps.
now the update process seems to take a little bit more time but still fails!.

now these errors appear:
GetUserTokenFromSessionId failed with error 800704dd for session 0
2008-09-16 10:35:52:806 804 990 Agent * WARNING: Exit code = 0x80240020

and

2008-09-16 10:35:52:806 1968 4bc COMAPI >>-- RESUMED -- COMAPI: Install
[ClientId = MicrosoftUpdate]
2008-09-16 10:35:52:806 1968 4bc COMAPI - Install call failed
2008-09-16 10:35:52:806 1968 4bc COMAPI - Reboot required = No
2008-09-16 10:35:52:806 1968 4bc COMAPI - WARNING: Exit code = 0x80240FFF;
Call error code = 0x80240020

any more suggestions?



"Diana" wrote:

> Hello,
>
> Please try the steps in the article listed below:
>
> 943144 Updates are not installed successfully from Windows Update, from
> Microsoft Update, or by using Automatic Updates after you perform a new
> Windows XP installation or you repair a Windows XP installation
> http://support.microsoft.com/default.aspx?scid=kb;EN-US;943144
>
> Diana Smith [MSFT] <diasmith(a)hotmail.com>
> CSS Security Team
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>

From: TaurArian on 16 Sep 2008 05:36
Error messages that you may receive when you try to download and install
updates from the Windows Update Web site, from the Microsoft Update Web
site, or from a WSUS server: "0x800704DD," "0x80240020," or both
http://support.microsoft.com/kb/910341

--

TaurArian [MVP] 2005-2009 - Update Services
http://taurarian.mvps.org
======================================
How to ask a question: http://support.microsoft.com/kb/555375
Computer Maintenance: Acronis / Diskeeper / Paragon / Raxco


"AGonos" <AGonos(a)discussions.microsoft.com> wrote in message
news:F98F3D34-881C-4854-89D0-D5C4B5EAA323(a)microsoft.com...
> Thanks for your attempt to help. But I have already done this to no help
> at
> all.
> I did try registering the dll and retried but no help.
> And I have not repaired my installation.
>
> Although the windows update site responds with no error and does not log
> any
> info in the history log, i found some error messages in the log files in
> the
> winows directory.
>
> These read:
>
> 2008-09-15 18:11:31:039 808 c30 Agent *************
> 2008-09-15 18:11:31:039 808 c30 Agent ** START ** Agent: Installing
> updates [CallerId = MicrosoftUpdate]
> 2008-09-15 18:11:31:039 808 c30 Agent *********
> 2008-09-15 18:11:31:039 808 c30 Agent * Updates to install = 1
> 2008-09-15 18:11:31:049 2796 b1c COMAPI - Updates to install = 1
> 2008-09-15 18:11:31:059 2796 b1c COMAPI <<-- SUBMITTED -- COMAPI: Install
> [ClientId = MicrosoftUpdate]
> 2008-09-15 18:11:31:510 808 c30 Agent * Title = MITAC TECHNOLOGY CORP.
> - Input Devices - Remove Control Device V1.0.0.2
> 2008-09-15 18:11:31:510 808 c30 Agent * UpdateId =
> {F43112B3-DAA5-48CA-956B-BA3EE8D3F0B0}.100
> 2008-09-15 18:11:34:925 808 5c4 Report REPORT EVENT:
> {E386019B-0160-4409-808C-BA0954EA992B} 2008-09-15
> 18:11:29:928+0300 1 162 101 {F43112B3-DAA5-48CA-956B-BA3EE8D3F0B0} 100 0
> MicrosoftUpdate Success Content Download Download succeeded.
> 2008-09-15 18:14:26:652 808 c30 Service WARNING: GetUserTokenFromSessionId
> failed with error 800704dd for session 0
> 2008-09-15 18:14:28:034 808 c30 Agent * WARNING: Exit code = 0x80240020
> 2008-09-15 18:14:28:034 808 c30 Agent *********
> 2008-09-15 18:14:28:034 808 c30 Agent ** END ** Agent: Installing
> updates [CallerId = MicrosoftUpdate]
> 2008-09-15 18:14:28:044 808 c30 Agent *************
>
>
>
> OK it is difficult to see in a small space but the point is :
> WARNING: GetUserTokenFromSessionId failed with error 800704dd for session
> 0
> 2008-09-15 18:14:28:034 808 c30 Agent * WARNING: Exit code = 0x80240020
>
> So looked in here with these error codes and found a suggestion for some
> registry info that might be missing!
> indeed they were missing the whole key senslogn under
> HK_LM\software\microsoft\windows nt\currentversion\winlogon\notify
> I cannot point you to the article I found but if someone needs it I can
> look
> for it again.
>
> So I followed those steps.
> now the update process seems to take a little bit more time but still
> fails!.
>
> now these errors appear:
> GetUserTokenFromSessionId failed with error 800704dd for session 0
> 2008-09-16 10:35:52:806 804 990 Agent * WARNING: Exit code = 0x80240020
>
> and
>
> 2008-09-16 10:35:52:806 1968 4bc COMAPI >>-- RESUMED -- COMAPI: Install
> [ClientId = MicrosoftUpdate]
> 2008-09-16 10:35:52:806 1968 4bc COMAPI - Install call failed
> 2008-09-16 10:35:52:806 1968 4bc COMAPI - Reboot required = No
> 2008-09-16 10:35:52:806 1968 4bc COMAPI - WARNING: Exit code =
> 0x80240FFF;
> Call error code = 0x80240020
>
> any more suggestions?
>
>
>
> "Diana" wrote:
>
>> Hello,
>>
>> Please try the steps in the article listed below:
>>
>> 943144 Updates are not installed successfully from Windows Update, from
>> Microsoft Update, or by using Automatic Updates after you perform a new
>> Windows XP installation or you repair a Windows XP installation
>> http://support.microsoft.com/default.aspx?scid=kb;EN-US;943144
>>
>> Diana Smith [MSFT] <diasmith(a)hotmail.com>
>> CSS Security Team
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>>
>


From: AGonos on 16 Sep 2008 07:18
Thank you TaurArian
This was the post I had found and tried to use to resolve the issue as I was
describing earlier.
However that alone did not help.
I am glad to say that now i have resolved the issue.
what I did was: /wuforce install the windowsupdateagent30-x86.exe
then restart and .. stil not working.
Then I exported the HK_LM\software\microsoft\windows
nt\currentversion\winlogon\notify\SensLogn
from my desktop - work PC and imported it into my laptop.

This at first look at least did not seem any different to the values I had
entered manualy following the article you suggested.

then I restarted and before I attempted to MSUPDATE I deleted
softwaredistribution once more (I have done this before ). (Implied I
shutdown "Automatic Updates" service and restarted it )

Then I went into the Windows Update Site and this time It was reset.
It asked that I accept the License or whatever that was, checked for
software... and Finally it worked. It installed one update!.

So thank you though propably someone should add deleting the
softwarediostribution folder as well as adding the registry keys. It seems
that the contents were corrupt in a strange way!



then


"TaurArian" wrote:

> Error messages that you may receive when you try to download and install
> updates from the Windows Update Web site, from the Microsoft Update Web
> site, or from a WSUS server: "0x800704DD," "0x80240020," or both
> http://support.microsoft.com/kb/910341
>
> --
>
> TaurArian [MVP] 2005-2009 - Update Services
> http://taurarian.mvps.org
> ======================================
> How to ask a question: http://support.microsoft.com/kb/555375
> Computer Maintenance: Acronis / Diskeeper / Paragon / Raxco
>
>
> "AGonos" <AGonos(a)discussions.microsoft.com> wrote in message
> news:F98F3D34-881C-4854-89D0-D5C4B5EAA323(a)microsoft.com...
> > Thanks for your attempt to help. But I have already done this to no help
> > at
> > all.
> > I did try registering the dll and retried but no help.
> > And I have not repaired my installation.
> >
> > Although the windows update site responds with no error and does not log
> > any
> > info in the history log, i found some error messages in the log files in
> > the
> > winows directory.
> >
> > These read:
> >
> > 2008-09-15 18:11:31:039 808 c30 Agent *************
> > 2008-09-15 18:11:31:039 808 c30 Agent ** START ** Agent: Installing
> > updates [CallerId = MicrosoftUpdate]
> > 2008-09-15 18:11:31:039 808 c30 Agent *********
> > 2008-09-15 18:11:31:039 808 c30 Agent * Updates to install = 1
> > 2008-09-15 18:11:31:049 2796 b1c COMAPI - Updates to install = 1
> > 2008-09-15 18:11:31:059 2796 b1c COMAPI <<-- SUBMITTED -- COMAPI: Install
> > [ClientId = MicrosoftUpdate]
> > 2008-09-15 18:11:31:510 808 c30 Agent * Title = MITAC TECHNOLOGY CORP.
> > - Input Devices - Remove Control Device V1.0.0.2
> > 2008-09-15 18:11:31:510 808 c30 Agent * UpdateId =
> > {F43112B3-DAA5-48CA-956B-BA3EE8D3F0B0}.100
> > 2008-09-15 18:11:34:925 808 5c4 Report REPORT EVENT:
> > {E386019B-0160-4409-808C-BA0954EA992B} 2008-09-15
> > 18:11:29:928+0300 1 162 101 {F43112B3-DAA5-48CA-956B-BA3EE8D3F0B0} 100 0
> > MicrosoftUpdate Success Content Download Download succeeded.
> > 2008-09-15 18:14:26:652 808 c30 Service WARNING: GetUserTokenFromSessionId
> > failed with error 800704dd for session 0
> > 2008-09-15 18:14:28:034 808 c30 Agent * WARNING: Exit code = 0x80240020
> > 2008-09-15 18:14:28:034 808 c30 Agent *********
> > 2008-09-15 18:14:28:034 808 c30 Agent ** END ** Agent: Installing
> > updates [CallerId = MicrosoftUpdate]
> > 2008-09-15 18:14:28:044 808 c30 Agent *************
> >
> >
> >
> > OK it is difficult to see in a small space but the point is :
> > WARNING: GetUserTokenFromSessionId failed with error 800704dd for session
> > 0
> > 2008-09-15 18:14:28:034 808 c30 Agent * WARNING: Exit code = 0x80240020
> >
> > So looked in here with these error codes and found a suggestion for some
> > registry info that might be missing!
> > indeed they were missing the whole key senslogn under
> > HK_LM\software\microsoft\windows nt\currentversion\winlogon\notify
> > I cannot point you to the article I found but if someone needs it I can
> > look
> > for it again.
> >
> > So I followed those steps.
> > now the update process seems to take a little bit more time but still
> > fails!.
> >
> > now these errors appear:
> > GetUserTokenFromSessionId failed with error 800704dd for session 0
> > 2008-09-16 10:35:52:806 804 990 Agent * WARNING: Exit code = 0x80240020
> >
> > and
> >
> > 2008-09-16 10:35:52:806 1968 4bc COMAPI >>-- RESUMED -- COMAPI: Install
> > [ClientId = MicrosoftUpdate]
> > 2008-09-16 10:35:52:806 1968 4bc COMAPI - Install call failed
> > 2008-09-16 10:35:52:806 1968 4bc COMAPI - Reboot required = No
> > 2008-09-16 10:35:52:806 1968 4bc COMAPI - WARNING: Exit code =
> > 0x80240FFF;
> > Call error code = 0x80240020
> >
> > any more suggestions?
> >
> >
> >
> > "Diana" wrote:
> >
> >> Hello,
> >>
> >> Please try the steps in the article listed below:
> >>
> >> 943144 Updates are not installed successfully from Windows Update, from
> >> Microsoft Update, or by using Automatic Updates after you perform a new
> >> Windows XP installation or you repair a Windows XP installation
> >> http://support.microsoft.com/default.aspx?scid=kb;EN-US;943144
> >>
> >> Diana Smith [MSFT] <diasmith(a)hotmail.com>
> >> CSS Security Team
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >>
> >
>
>
>
 | 
Pages: 1
Prev: error code 8024e001
Next: vista service pack 1