BFS vs. mainline scheduler benchmarks and measurements
in [Kernel]
|
Prev: [PATCH 1/1] AGP: amd64, fix pci reference leaks
Next: [PATCH 2/3] viafb: remove unused structure member
From: Martin Steigerwald on 10 Sep 2009 17:20 Uhoh, it seems I configured my kernel's scheduler to produce keyboard failure. The many o's in my last mails where not intended. Let's see whether its better with: shambhala:/proc/sys/kernel> echo 2000000 > /proc/sys/kernel/sched_wakeup_granularity_ns First time I just lost the keyboard in X for a while in such a way that even a Strg-Alt-F1 did not yield any effect. None of what I typed appeared anywhere, not in the mail composer window nor in a Konsole terminal or in the Kickoff menu search field. Mouse still worked okay. I was able to log out via mouse. Then even in KDM the keyboard did not work. Suddenly it produced repeating key input events without me typing anything anymore. Like the second time with those o's where I pressed on send instead of save as draft accidentally. I did not have any keyboard issues like this recently nor in the last year or longer. Let's see whether that raised wakeup_granulaty helps. Desktop experience seems still quite fluid, maybe not as fluid as with the settings below. But I prefer a working keyboard in order to finish up this mail. Am Donnerstag 10 September 2009 schrieb Ingo Molnar: > * Martin Steigerwald <Martin(a)lichtvoll.de> wrote: > > Am Mittwoch 09 September 2009 schrieb Peter Zijlstra: > > > On Wed, 2009-09-09 at 12:05 +0300, Nikos Chantziaras wrote: > > > > Thank you for mentioning min_granularity. After: > > > > > > > > echo 10000000 > /proc/sys/kernel/sched_latency_ns > > > > echo 2000000 > /proc/sys/kernel/sched_min_granularity_ns > > > > > > You might also want to do: > > > > > > echo 2000000 > /proc/sys/kernel/sched_wakeup_granularity_ns > > > > > > That affects when a newly woken task will preempt an already > > > running task. > > > > Heh that scheduler thing again... and unfortunately Col appearing > > to feel hurt while I am think that Ingo is honest on his offer on > > collaboration... > > > > While it makes fun playing with that numbers and indeed > > experiencing subjectively a more fluid deskopt how about just a > > > > echo "This is a f* desktop!" > /proc/sys/kernel/sched_workload > > No need to do that, that's supposed to be the default :-) The knobs > are really just there to help us make it even more so - i.e. you > dont need to tune them. But it really relies on people helping us > out and tell us which combinations work best ... Well currently I have: shambhala:/proc/sys/kernel> grep "" sched_latency_ns sched_min_granularity_ns sched_wakeup_granularity_ns sched_latency_ns:100000 sched_min_granularity_ns:200000 sched_wakeup_granularity_ns:0 And this give me *a completely different* desktop experience. I am using KDE 4.3.1 on a mixture of Debian Squeeze/Sid/Experimental, with compositing. And now when I flip desktops or open a window I can *actually see* the animation. Before I just saw two to five steps of the animation, now its really a lot more fluid. perceived _latency--! Well its like opening the eyes again cause I tended to take the jerky behavior as normal and possibly related to having KDE 4.3.1 with compositing enabled on a ThinkPad T42 with 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] (with OSS Radeon driver) which I consider to be low end for that workload. But then why actually? Next to me is a Sam440ep with PPC 440 667 MHz and and even older Radeon M9 with AmigaOS 4.1 and some simple transparency effects with compositing. And well this combo does feel like it wheel spins cause the hardware is actually to fast [2nd keyboard borkage, somewhere before where the first where I saved as draft] for that operating system. So actually I knew there could be less waiting and less latency. (Granted AmigaOS 4.1 is much more minimalistic also in terms on features and no complete memory protection and message passing by exchanging pointers and whatnot). At least to summarize this: With those settings I just keep switching desktops and opening windows to enjoy the effects. Desktops flip over fluently and windows zoom in on opening fluently either. All those experiences are with: shambhala:~> cat /proc/version Linux version 2.6.31-rc7-tp42-toi-3.0.1-04741-g57e61c0 (martin(a)shambhala) (gcc version 4.3.3 (Debian 4.3.3-10) ) #6 PREEMPT Sun Aug 23 10:51:32 CEST 2009 (Nigel Cunningham's tuxonice-head git from about 10 days ago) Keyboard still working. Possibly it really has got broken with zero as wakeup granularity. > > Or to say it in other words: The Linux kernel should not require > > me to fine-tune three or more values to have the scheduler act in > > a way that matches my workload. > > > > I am willing to test stuff on my work thinkpad and my Amarok > > thinkpad in order to help improving with that. > > It would be great if you could check latest -tip: > > http://people.redhat.com/mingo/tip.git/README > > and compare it to vanilla .31? > > Also, could you outline the interactivity problems/complaints you > have? Hmmm, would there be a simple possibilty to somehow merge tuxonice git and your tip.git into a nice TuxOnIce + scheduler enhanced kernel? I do tend not to stick with non TuxOnIce enabled kernels for too long. At least not on my work thinkpad and my Amarok thinkpad cause I believe that reboots are just for kernel upgrades (with API changes that is) ;-). Apart from that I lack time to compile a kernel a day at the moment like in good old RSDL, SD and CFS testing times ;-). But next kernel, 2.6.31- not-a-rc, is due and I take suggestions for that one. Preferably I would like to have it with TuxOnIce tough. Problems I faced: 1) Well those effect issues. Jerky at best. Animations which should have had 25 frames per second at least, showed 2-5 frames a second. Above tuning helped a lot with that. On the other hand DVD playback with Dragon Player (and Xine) seems just fine - I thought at least. Maybe I should compare watching StarTrek NG with and without scheduler latency fixes. And maybe I find some additional frames per duration there too. 2) Some jerks here and there. Difficult to categorize. It sometimes just happens that the machine does not follow where I put my attention. Like a distracted human who has other things to do than listening to me. This could be trying to enter some text in a Qt text input widget. But I need to look more carefully as to when, where and why. This is just too fuzzy. 3) Sometimes even typing as a visible latency. Its difficult to spot the cause for that stuff. When I type I expect to see each letter as I type it. 4) I/O latencies causing the machine to actually stall for seconds. But this one got much better when I switched to 2.6.31 - I had to skip 2.6.30 cause it didn't tuxonice nicely, even 2.6.31 did not until it reached rc5. It seems even way better after switching from XFS to Ext4. But well that is a different issue. And at the moment I am quite happy with that. 5) Some window manager operations like resizing windows take very long with compositing. But I think this issue may lie elsewhere. Cause these did not improve with above settings while many compositing effects did. I dunno where that slow window resizing comes from. Whether its a compositing / KWin / Qt refresh issue or something scheduler or something gfx driver related. Keyboard is still working, yay! So the X.org keyboard driver might get irritated with zero as wakeup granularity. Ciao, -- Martin 'Helios' Steigerwald - http://www.Lichtvoll.de GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
From: Benjamin Herrenschmidt on 10 Sep 2009 21:40 > I'd say add an extra horizontal split in the second column, so you'd get > three areas in the right column: > - top for the global target (permanently) > - middle for current, either: > - "current most lagging" if "Global" is selected in left column > - selected process if a specific target is selected in left column > - bottom for backtrace > > Maybe with that setup "Global" in the left column should be renamed to > something like "Dynamic". > > The backtrace area would show selection from either top or middle areas > (so selecting a cause in top or middle area should unselect causes in the > other). I'll have a look after the merge window madness. Multiple windows is also still an option I suppose even if i don't like it that much: we could support double-click on an app or "global" in the left list, making that pop a new window with the same content as the right pane for that app (or global) that updates at the same time as the rest. Somebody ping me if I seem to have forgotten about it in 2 weeks :-) Ben. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Mat on 11 Sep 2009 05:30 Martin Steigerwald <Martin <at> lichtvoll.de> writes: > > Am Donnerstag 10 September 2009 schrieb Ingo Molnar: [snip] > > what is /debug/sched_features - is NO_NEW_FAIR_SLEEPERS set? If not > > set yet then try it: > > > > echo NO_NEW_FAIR_SLEEPERS > /debug/sched_features > > > > that too might make things more fluid. Hi Martin, it made an tremendous difference which still has to be tested out :) Hi Ingo, which adverse effect could cat /proc/sys/kernel/sched_wakeup_granularity_ns 0 have on the throughput ? Concerning that "NO_NEW_FAIR_SLEEPERS" switch - isn't it as easy as to do the following ? (I'm not sure if there's supposed to be another debug) echo NO_NEW_FAIR_SLEEPERS > /sys/kernel/debug/sched_features which after the change says: cat /sys/kernel/debug/sched_features NO_NEW_FAIR_SLEEPERS NO_NORMALIZED_SLEEPER ADAPTIVE_GRAN WAKEUP_PREEMPT START_DEBIT AFFINE_WAKEUPS CACHE_HOT_BUDDY SYNC_WAKEUPS NO_HRTICK NO_DOUBLE_TICK ASYM_GRAN LB_BIAS LB_WAKEUP_UPDATE ASYM_EFF_LOAD NO_WAKEUP_OVERLAP LAST_BUDDY OWNER_SPIN I hope that's the correct switch ^^ Greetings and please keep on improving the scheduler (especially with regards to the desktop crowd) Regards Mat -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Mat on 11 Sep 2009 06:20 Martin Steigerwald <Martin <at> lichtvoll.de> writes: > > Am Donnerstag 10 September 2009 schrieb Ingo Molnar: [snip] > > what is /debug/sched_features - is NO_NEW_FAIR_SLEEPERS set? If not > > set yet then try it: > > > > echo NO_NEW_FAIR_SLEEPERS > /debug/sched_features > > > > that too might make things more fluid. Hi Martin, it made an tremendous difference which still has to be tested out :) Hi Ingo, which adverse effect could cat /proc/sys/kernel/sched_wakeup_granularity_ns 0 have on the throughput ? Concerning that "NO_NEW_FAIR_SLEEPERS" switch - isn't it as easy as to do the following ? (I'm not sure if there's supposed to be another debug) echo NO_NEW_FAIR_SLEEPERS > /sys/kernel/debug/sched_features which after the change says: cat /sys/kernel/debug/sched_features NO_NEW_FAIR_SLEEPERS NO_NORMALIZED_SLEEPER ADAPTIVE_GRAN WAKEUP_PREEMPT START_DEBIT AFFINE_WAKEUPS CACHE_HOT_BUDDY SYNC_WAKEUPS NO_HRTICK NO_DOUBLE_TICK ASYM_GRAN LB_BIAS LB_WAKEUP_UPDATE ASYM_EFF_LOAD NO_WAKEUP_OVERLAP LAST_BUDDY OWNER_SPIN I hope that's the correct switch ^^ Greetings and please keep on improving the scheduler (especially with regards to the desktop crowd) Regards Mat (Sorry for the "double-post" - this one is including all of the CC which GMane left out :) ) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo(a)vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
From: Volker Armin Hemmann on 11 Sep 2009 14:40
Hi, this is with 2.6.31+reiser4+fglrx Phenom II X4 955 KDE 4.3.1, composite temporary disabled. tvtime running. load: fat emerge with make -j5 running in one konsole tab (xulrunner being compiled). without NO_NEW_FAIR_SLEEPERS: tvtime is smooth most of the time with NO_NEW_FAIR_SLEEPERS: tvtime is more jerky. Very visible in scenes with movement. without background load: both settings act the same. tvtime is smooth, video is smooth, games are nice. No real difference. config is attached. Glück Auf, Volker dmesg: [ 0.000000] Linux version 2.6.31r4 (root(a)energy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Thu Sep 10 10:48:07 CEST 2009 [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000238000000 aka 9088M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] modified: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] modified: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] modified: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00c7e00000 page 2M [ 0.000000] 00c7e00000 - 00c7eb0000 page 4k [ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000 [ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7ec0000 00040 [ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00015fb8c0] TEXT DATA BSS ==> [0001000000 - 00015fb8c0] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [00015fc000 - 00015fc133] BRK ==> [00015fc000 - 00015fc133] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000- ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7eb0 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2096703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000 [ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages at ffff880028034000, static data 72160 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793 [ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 2a42000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8184476k/9306112k available (3500k kernel code, 919300k absent, 201380k reserved, 1751k data, 376k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3200.214 MHz processor. [ 0.000609] Console: colour VGA+ 80x25 [ 0.000611] console [tty0] enabled [ 0.003333] hpet clockevent registered [ 0.003333] alloc irq_desc for 24 on node 0 [ 0.003333] alloc kstat_irqs on node 0 [ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.10 BogoMIPS (lpj=10667366) [ 0.003421] Mount-cache hash table entries: 256 [ 0.003543] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003578] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003613] tseg: 0000000000 [ 0.003618] CPU: Physical Processor ID: 0 [ 0.003652] CPU: Processor Core ID: 0 [ 0.003686] mce: CPU supports 6 MCE banks [ 0.003725] using C1E aware idle routine [ 0.003768] ACPI: Core revision 20090521 [ 0.016704] Setting APIC routing to flat [ 0.017026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050860] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.053333] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666966) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.144161] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.144507] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.146699] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666970) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.240822] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.241168] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.243373] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666972) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.337491] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.337836] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.340006] Brought up 4 CPUs [ 0.340040] Total of 4 processors activated (25611.67 BogoMIPS). [ 0.340109] CPU0 attaching sched-domain: [ 0.340111] domain 0: span 0-3 level MC [ 0.340112] groups: 0 1 2 3 [ 0.340116] CPU1 attaching sched-domain: [ 0.340117] domain 0: span 0-3 level MC [ 0.340118] groups: 1 2 3 0 [ 0.340120] CPU2 attaching sched-domain: [ 0.340121] domain 0: span 0-3 level MC [ 0.340122] groups: 2 3 0 1 [ 0.340125] CPU3 attaching sched-domain: [ 0.340126] domain 0: span 0-3 level MC [ 0.340127] groups: 3 0 1 2 [ 0.340162] xor: automatically using best checksumming function: generic_sse [ 0.356667] generic_sse: 12835.200 MB/sec [ 0.356700] xor: using function: generic_sse (12835.200 MB/sec) [ 0.356754] Time: 7:07:42 Date: 09/11/09 [ 0.356802] NET: Registered protocol family 16 [ 0.356851] node 0 link 0: io port [1000, ffffff] [ 0.356851] TOM: 00000000c8000000 aka 3200M [ 0.356851] Fam 10h mmconf [e0000000, efffffff] [ 0.356851] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.356851] node 0 link 0: mmio [f0000000, ffffffff] [ 0.356851] node 0 link 0: mmio [a0000, bffff] [ 0.356851] node 0 link 0: mmio [c8000000, dfffffff] [ 0.356851] TOM2: 0000000238000000 aka 9088M [ 0.356851] bus: [00,07] on node 0 link 0 [ 0.356851] bus: 00 index 0 io port: [0, ffff] [ 0.356851] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.356851] bus: 00 index 2 mmio: [a0000, bffff] [ 0.356851] bus: 00 index 3 mmio: [c8000000, dfffffff] [ 0.356851] bus: 00 index 4 mmio: [238000000, fcffffffff] [ 0.356851] ACPI: bus type pci registered [ 0.356851] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.356851] PCI: Not using MMCONFIG. [ 0.356851] PCI: Using configuration type 1 for base access [ 0.356851] PCI: Using configuration type 1 for extended access [ 0.356851] bio: create slab <bio-0> at 0 [ 0.356978] ACPI: EC: Look up EC in DSDT [ 0.367031] ACPI: Interpreter enabled [ 0.367538] ACPI: (supports S0 S1 S3 S4 S5) [ 0.367652] ACPI: Using IOAPIC for interrupt routing [ 0.367725] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.370531] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.375947] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.380367] ACPI: No dock devices found. [ 0.380451] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.380520] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.380520] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.380520] pci 0000:00:02.0: PME# disabled [ 0.380520] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.380520] pci 0000:00:09.0: PME# disabled [ 0.380520] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.380520] pci 0000:00:0a.0: PME# disabled [ 0.380520] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007] [ 0.380520] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003] [ 0.380520] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007] [ 0.380520] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003] [ 0.380520] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f] [ 0.380520] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff] [ 0.380520] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff] [ 0.380520] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff] [ 0.380576] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff] [ 0.380625] pci 0000:00:12.2: supports D1 D2 [ 0.380626] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.380663] pci 0000:00:12.2: PME# disabled [ 0.380724] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff] [ 0.380775] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff] [ 0.380843] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff] [ 0.380893] pci 0000:00:13.2: supports D1 D2 [ 0.380894] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.380930] pci 0000:00:13.2: PME# disabled [ 0.381072] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.381078] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.381084] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.381089] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.381095] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.381219] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff] [ 0.381353] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.381360] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.381365] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.381372] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.381387] pci 0000:02:00.0: supports D1 D2 [ 0.381415] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff] [ 0.381445] pci 0000:02:00.1: supports D1 D2 [ 0.381495] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.381497] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.381500] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.381543] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 0.381545] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.381548] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff] [ 0.383347] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff] [ 0.383360] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff] [ 0.383370] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff] [ 0.383375] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff] [ 0.383402] pci 0000:01:00.0: supports D1 D2 [ 0.383403] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.383440] pci 0000:01:00.0: PME# disabled [ 0.383525] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff] [ 0.383527] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.383530] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.383565] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff] [ 0.383644] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f] [ 0.383701] pci 0000:05:08.0: supports D1 D2 [ 0.383743] pci 0000:00:14.4: transparent bridge [ 0.383779] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.383785] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff] [ 0.383797] pci_bus 0000:00: on NUMA node 0 [ 0.383800] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.383936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.383981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.384025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.384091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.386726] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.386953] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.387183] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.387408] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.387643] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.387914] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15) [ 0.388140] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.388352] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.388538] SCSI subsystem initialized [ 0.388538] libata version 3.00 loaded. [ 0.388538] usbcore: registered new interface driver usbfs [ 0.388538] usbcore: registered new interface driver hub [ 0.388538] usbcore: registered new device driver usb [ 0.443347] raid6: int64x1 2755 MB/s [ 0.500010] raid6: int64x2 3858 MB/s [ 0.556669] raid6: int64x4 2850 MB/s [ 0.613353] raid6: int64x8 2537 MB/s [ 0.670007] raid6: sse2x1 3999 MB/s [ 0.726666] raid6: sse2x2 7012 MB/s [ 0.783343] raid6: sse2x4 7975 MB/s [ 0.783377] raid6: using algorithm sse2x4 (7975 MB/s) [ 0.783423] PCI: Using ACPI for IRQ routing [ 0.783423] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.783425] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.793433] PCI-DMA: Disabling AGP. [ 0.793518] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.793518] PCI-DMA: using GART IOMMU. [ 0.793518] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.795205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.795312] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.800030] hpet: hpet2 irq 24 for MSI [ 0.810015] Switched to high resolution mode on CPU 0 [ 0.811193] Switched to high resolution mode on CPU 2 [ 0.811196] Switched to high resolution mode on CPU 1 [ 0.811200] Switched to high resolution mode on CPU 3 [ 0.820035] pnp: PnP ACPI init [ 0.820085] ACPI: bus type pnp registered [ 0.822351] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.822406] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.822461] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.822515] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.822837] pnp: PnP ACPI: found 12 devices [ 0.822871] ACPI: ACPI bus type pnp unregistered [ 0.822911] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.822965] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.823002] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.823037] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.823072] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.823106] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 0.823141] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 0.823176] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 0.823211] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 0.823245] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 0.823280] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 0.823315] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 0.823359] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 0.823394] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 0.823429] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 0.823464] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 0.823499] system 00:07: ioport range 0x800-0x89f has been reserved [ 0.823533] system 00:07: ioport range 0xb00-0xb0f has been reserved [ 0.823568] system 00:07: ioport range 0xb20-0xb3f has been reserved [ 0.823603] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.823638] system 00:07: ioport range 0x910-0x91f has been reserved [ 0.823673] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.823708] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.823743] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.823780] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.823816] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.823852] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.828757] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.828792] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.828828] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.828863] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.828918] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.828953] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.828988] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff [ 0.829023] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff [ 0.829078] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.829112] pci 0000:00:0a.0: IO window: 0xb000-0xbfff [ 0.829148] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.829183] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.829237] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.829273] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.829310] pci 0000:00:14.4: MEM window: disabled [ 0.829346] pci 0000:00:14.4: PREFETCH window: 0xfcf00000-0xfcffffff [ 0.829387] alloc irq_desc for 18 on node -1 [ 0.829388] alloc kstat_irqs on node -1 [ 0.829392] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.829428] pci 0000:00:02.0: setting latency timer to 64 [ 0.829432] alloc irq_desc for 17 on node -1 [ 0.829433] alloc kstat_irqs on node -1 [ 0.829435] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.829471] pci 0000:00:09.0: setting latency timer to 64 [ 0.829474] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.829509] pci 0000:00:0a.0: setting latency timer to 64 [ 0.829516] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.829517] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.829519] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.829521] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.829522] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.829523] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.829525] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff] [ 0.829526] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff] [ 0.829527] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.829529] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.829530] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.829531] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.829533] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff] [ 0.829534] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.829535] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.829547] NET: Registered protocol family 2 [ 0.829602] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.830084] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.831067] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.831468] TCP: Hash tables configured (established 262144 bind 65536) [ 0.831504] TCP reno registered [ 0.831582] NET: Registered protocol family 1 [ 0.832803] Scanning for low memory corruption every 60 seconds [ 0.833572] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.833696] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.833781] msgmni has been set to 15987 [ 0.834082] alg: No test for stdrng (krng) [ 0.834123] async_tx: api initialized (sync-only) [ 0.834227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.834280] io scheduler noop registered [ 0.834315] io scheduler cfq registered (default) [ 0.834448] pci 0000:02:00.0: Boot video device [ 0.834538] alloc irq_desc for 25 on node -1 [ 0.834540] alloc kstat_irqs on node -1 [ 0.834545] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.834550] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.834642] alloc irq_desc for 26 on node -1 [ 0.834643] alloc kstat_irqs on node -1 [ 0.834646] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.834650] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.834741] alloc irq_desc for 27 on node -1 [ 0.834742] alloc kstat_irqs on node -1 [ 0.834744] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X [ 0.834748] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.834953] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.835007] ACPI: Power Button [PWRF] [ 0.835098] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.835152] ACPI: Power Button [PWRB] [ 0.835302] processor LNXCPU:00: registered as cooling_device0 [ 0.835337] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.835434] processor LNXCPU:01: registered as cooling_device1 [ 0.835504] processor LNXCPU:02: registered as cooling_device2 [ 0.835577] processor LNXCPU:03: registered as cooling_device3 [ 0.839315] Linux agpgart interface v0.103 [ 0.839511] ahci 0000:00:11.0: version 3.0 [ 0.839521] alloc irq_desc for 22 on node -1 [ 0.839522] alloc kstat_irqs on node -1 [ 0.839525] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.839673] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.839727] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.840272] scsi0 : ahci [ 0.840403] scsi1 : ahci [ 0.840501] scsi2 : ahci [ 0.840598] scsi3 : ahci [ 0.840697] scsi4 : ahci [ 0.840795] scsi5 : ahci [ 0.840926] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed [ 0.840962] ata2: SATA max UDMA/133 abar m1024(a)0xfddff800 port 0xfddff980 irq 22 [ 0.841016] ata3: SATA max UDMA/133 abar m1024(a)0xfddff800 port 0xfddffa00 irq 22 [ 0.841070] ata4: SATA max UDMA/133 abar m1024(a)0xfddff800 port 0xfddffa80 irq 22 [ 0.841124] ata5: SATA max UDMA/133 abar m1024(a)0xfddff800 port 0xfddffb00 irq 22 [ 0.841178] ata6: SATA max UDMA/133 abar m1024(a)0xfddff800 port 0xfddffb80 irq 22 [ 0.841459] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.841493] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.841943] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.842074] mice: PS/2 mouse device common for all mice [ 0.842243] rtc_cmos 00:02: RTC can wake from S4 [ 0.842313] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.842369] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.842428] md: raid1 personality registered for level 1 [ 0.842462] md: raid6 personality registered for level 6 [ 0.842496] md: raid5 personality registered for level 5 [ 0.842530] md: raid4 personality registered for level 4 [ 0.843117] cpuidle: using governor ladder [ 0.843151] cpuidle: using governor menu [ 0.843689] usbcore: registered new interface driver hiddev [ 0.843746] usbcore: registered new interface driver usbhid [ 0.843780] usbhid: v2.6:USB HID core driver [ 0.843843] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 0.843878] ALSA device list: [ 0.843911] No soundcards found. [ 0.843979] TCP cubic registered [ 0.844019] NET: Registered protocol family 10 [ 0.844148] IPv6 over IPv4 tunneling driver [ 0.844265] NET: Registered protocol family 17 [ 0.844315] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 0.844391] powernow-k8: 0 : pstate 0 (3200 MHz) [ 0.844425] powernow-k8: 1 : pstate 1 (2500 MHz) [ 0.844459] powernow-k8: 2 : pstate 2 (2100 MHz) [ 0.844492] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.844886] PM: Resume from disk failed. [ 0.844966] Magic number: 9:648:116 [ 0.866018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.160036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.160097] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.160150] ata6: SATA link down (SStatus 0 SControl 300) [ 1.160205] ata5: SATA link down (SStatus 0 SControl 300) [ 1.160259] ata3: SATA link down (SStatus 0 SControl 300) [ 1.166391] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 1.166432] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.166480] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 1.166514] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.172888] ata4.00: configured for UDMA/133 [ 1.172943] ata2.00: configured for UDMA/133 [ 1.560035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.566394] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 1.566430] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.572855] ata1.00: configured for UDMA/133 [ 1.583424] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.583684] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.583756] sd 0:0:0:0: [sda] Write Protect is off [ 1.583791] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.583800] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.583911] sda: [ 1.583952] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.584094] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.584283] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.584354] sd 1:0:0:0: [sdb] Write Protect is off [ 1.584389] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.584398] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.584507] sdb: [ 1.584577] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.584709] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.584865] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.584934] sd 3:0:0:0: [sdc] Write Protect is off [ 1.584969] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.584977] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.585071] sdc: [ 1.585123] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.588354] sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sda1 sda2 sda3 sda4 < sdb5 sdc5 sda5 sdc6 sdb6 > [ 1.606850] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.610449] sda6 > [ 1.610814] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.617957] sdc7 > [ 1.618341] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.618382] md: Waiting for all devices to be available before autodetect [ 1.618417] md: If you don't use raid, use raid=noautodetect [ 1.618533] md: Autodetecting RAID arrays. [ 1.724723] md: Scanned 12 and added 12 devices. [ 1.724758] md: autorun ... [ 1.724792] md: considering sdc6 ... [ 1.724827] md: adding sdc6 ... [ 1.724862] md: sdc5 has different UUID to sdc6 [ 1.724897] md: sdc3 has different UUID to sdc6 [ 1.724931] md: sdc1 has different UUID to sdc6 [ 1.724967] md: adding sda6 ... [ 1.725001] md: sda5 has different UUID to sdc6 [ 1.725036] md: sda3 has different UUID to sdc6 [ 1.725070] md: sda1 has different UUID to sdc6 [ 1.725106] md: adding sdb6 ... [ 1.725140] md: sdb5 has different UUID to sdc6 [ 1.725175] md: sdb3 has different UUID to sdc6 [ 1.725209] md: sdb1 has different UUID to sdc6 [ 1.725349] md: created md3 [ 1.725382] md: bind<sdb6> [ 1.725419] md: bind<sda6> [ 1.725456] md: bind<sdc6> [ 1.725492] md: running: <sdc6><sda6><sdb6> [ 1.725626] raid5: device sdc6 operational as raid disk 2 [ 1.725661] raid5: device sda6 operational as raid disk 0 [ 1.725695] raid5: device sdb6 operational as raid disk 1 [ 1.725846] raid5: allocated 3220kB for md3 [ 1.725910] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 [ 1.725963] RAID5 conf printout: [ 1.725996] --- rd:3 wd:3 [ 1.726029] disk 0, o:1, dev:sda6 [ 1.726062] disk 1, o:1, dev:sdb6 [ 1.726095] disk 2, o:1, dev:sdc6 [ 1.726142] md3: detected capacity change from 0 to 864065421312 [ 1.726213] md: considering sdc5 ... [ 1.726249] md: adding sdc5 ... [ 1.726283] md: sdc3 has different UUID to sdc5 [ 1.726318] md: sdc1 has different UUID to sdc5 [ 1.726353] md: adding sda5 ... [ 1.726388] md: sda3 has different UUID to sdc5 [ 1.726422] md: sda1 has different UUID to sdc5 [ 1.726458] md: adding sdb5 ... [ 1.726492] md: sdb3 has different UUID to sdc5 [ 1.726526] md: sdb1 has different UUID to sdc5 [ 1.726630] md: created md2 [ 1.726663] md: bind<sdb5> [ 1.726700] md: bind<sda5> [ 1.726738] md: bind<sdc5> [ 1.726774] md: running: <sdc5><sda5><sdb5> [ 1.726901] raid5: device sdc5 operational as raid disk 2 [ 1.726935] raid5: device sda5 operational as raid disk 0 [ 1.726969] raid5: device sdb5 operational as raid disk 1 [ 1.727126] raid5: allocated 3220kB for md2 [ 1.727190] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 [ 1.727243] RAID5 conf printout: [ 1.727276] --- rd:3 wd:3 [ 1.727309] disk 0, o:1, dev:sda5 [ 1.727342] disk 1, o:1, dev:sdb5 [ 1.727376] disk 2, o:1, dev:sdc5 [ 1.727420] md2: detected capacity change from 0 to 40007499776 [ 1.727490] md: considering sdc3 ... [ 1.727526] md: adding sdc3 ... [ 1.727560] md: sdc1 has different UUID to sdc3 [ 1.727595] md: adding sda3 ... [ 1.727629] md: sda1 has different UUID to sdc3 [ 1.727664] md: adding sdb3 ... [ 1.727698] md: sdb1 has different UUID to sdc3 [ 1.727799] md: created md1 [ 1.727832] md: bind<sdb3> [ 1.727869] md: bind<sda3> [ 1.727905] md: bind<sdc3> [ 1.727945] md: running: <sdc3><sda3><sdb3> [ 1.728090] raid5: device sdc3 operational as raid disk 2 [ 1.728125] raid5: device sda3 operational as raid disk 0 [ 1.728159] raid5: device sdb3 operational as raid disk 1 [ 1.728320] raid5: allocated 3220kB for md1 [ 1.728370] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 1.728423] RAID5 conf printout: [ 1.728455] --- rd:3 wd:3 [ 1.728488] disk 0, o:1, dev:sda3 [ 1.728522] disk 1, o:1, dev:sdb3 [ 1.728555] disk 2, o:1, dev:sdc3 [ 1.728604] md1: detected capacity change from 0 to 79998877696 [ 1.728674] md: considering sdc1 ... [ 1.728710] md: adding sdc1 ... [ 1.728745] md: adding sda1 ... [ 1.728779] md: adding sdb1 ... [ 1.728813] md: created md0 [ 1.728846] md: bind<sdb1> [ 1.728882] md: bind<sda1> [ 1.728919] md: bind<sdc1> [ 1.728955] md: running: <sdc1><sda1><sdb1> [ 1.729133] raid1: raid set md0 active with 3 out of 3 mirrors [ 1.729176] md0: detected capacity change from 0 to 65667072 [ 1.729232] md: ... autorun DONE. [ 1.729284] md: Loading md3: /dev/sda3 [ 1.729322] md3: unknown partition table [ 1.729481] md: couldn't update array info. -22 [ 1.729518] md: could not bd_claim sda3. [ 1.729552] md: md_import_device returned -16 [ 1.729588] md: could not bd_claim sdb3. [ 1.729621] md: md_import_device returned -16 [ 1.729657] md: could not bd_claim sdc3. [ 1.729690] md: md_import_device returned -16 [ 1.729725] md: starting md3 failed [ 1.729800] md1: unknown partition table [ 1.767199] reiser4: md1: found disk format 4.0.0. [ 5.790318] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1. [ 5.790370] Freeing unused kernel memory: 376k freed [ 9.037775] udev: starting version 145 [ 9.217043] md2: [ 9.217072] md0: unknown partition table [ 9.282015] unknown partition table [ 10.420576] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.420591] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.420840] r8169 0000:01:00.0: setting latency timer to 64 [ 10.420871] alloc irq_desc for 28 on node -1 [ 10.420872] alloc kstat_irqs on node -1 [ 10.420882] r8169 0000:01:00.0: irq 28 for MSI/MSI-X [ 10.420988] eth0: RTL8168c/8111c at 0xffffc90012f18000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 28 [ 10.440462] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.440465] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 10.440491] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.440518] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 10.440532] drivers/usb/core/inode.c: creating file 'devices' [ 10.440534] drivers/usb/core/inode.c: creating file '001' [ 10.440566] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 10.440572] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 10.440575] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 10.440596] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 10.440602] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.440615] ehci_hcd 0000:00:12.2: debug port 1 [ 10.440619] ehci_hcd 0000:00:12.2: MWI active [ 10.440620] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 10.440633] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 10.440637] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.440642] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 10.447931] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 10.447961] usb usb1: default language 0x0409 [ 10.447965] usb usb1: udev 1, busnum 1, minor = 0 [ 10.447967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.447968] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.447969] usb usb1: Product: EHCI Host Controller [ 10.447970] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 10.447971] usb usb1: SerialNumber: 0000:00:12.2 [ 10.447998] usb usb1: uevent [ 10.448007] usb usb1: usb_probe_device [ 10.448009] usb usb1: configuration #1 chosen from 1 choice [ 10.448014] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 10.448021] usb 1-0:1.0: uevent [ 10.448028] hub 1-0:1.0: usb_probe_interface [ 10.448029] hub 1-0:1.0: usb_probe_interface - got id [ 10.448031] hub 1-0:1.0: USB hub found [ 10.448035] hub 1-0:1.0: 6 ports detected [ 10.448036] hub 1-0:1.0: standalone hub [ 10.448037] hub 1-0:1.0: no power switching (usb 1.0) [ 10.448038] hub 1-0:1.0: individual port over-current protection [ 10.448039] hub 1-0:1.0: power on to power good time: 20ms [ 10.448042] hub 1-0:1.0: local power source is good [ 10.448043] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 10.448067] drivers/usb/core/inode.c: creating file '001' [ 10.448085] alloc irq_desc for 19 on node -1 [ 10.448087] alloc kstat_irqs on node -1 [ 10.448091] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.448101] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 10.448105] drivers/usb/core/inode.c: creating file '002' [ 10.448122] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 10.448127] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 10.448130] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 10.448143] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 10.448148] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.448161] ehci_hcd 0000:00:13.2: debug port 1 [ 10.448164] ehci_hcd 0000:00:13.2: MWI active [ 10.448165] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 10.448173] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 10.448176] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.448181] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 10.457930] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 10.457945] usb usb2: default language 0x0409 [ 10.457949] usb usb2: udev 1, busnum 2, minor = 128 [ 10.457950] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.457952] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.457953] usb usb2: Product: EHCI Host Controller [ 10.457954] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 10.457955] usb usb2: SerialNumber: 0000:00:13.2 [ 10.457977] usb usb2: uevent [ 10.457984] usb usb2: usb_probe_device [ 10.457986] usb usb2: configuration #1 chosen from 1 choice [ 10.457989] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 10.457997] usb 2-0:1.0: uevent [ 10.458003] hub 2-0:1.0: usb_probe_interface [ 10.458004] hub 2-0:1.0: usb_probe_interface - got id [ 10.458005] hub 2-0:1.0: USB hub found [ 10.458009] hub 2-0:1.0: 6 ports detected [ 10.458010] hub 2-0:1.0: standalone hub [ 10.458010] hub 2-0:1.0: no power switching (usb 1.0) [ 10.458011] hub 2-0:1.0: individual port over-current protection [ 10.458013] hub 2-0:1.0: power on to power good time: 20ms [ 10.458015] hub 2-0:1.0: local power source is good [ 10.458016] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 10.458038] drivers/usb/core/inode.c: creating file '001' [ 10.474718] Linux video capture interface: v2.00 [ 10.489875] bttv: driver version 0.9.18 loaded [ 10.489877] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 10.489914] bttv: Bt8xx card found (0). [ 10.489923] alloc irq_desc for 21 on node -1 [ 10.489924] alloc kstat_irqs on node -1 [ 10.489928] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 10.489938] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000 [ 10.489971] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 10.489974] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.490007] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 10.547936] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 10.547939] hub 1-0:1.0: port 2: status 0501 change 0001 [ 10.557954] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 10.647931] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 10.647940] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 10.700045] ehci_hcd 0000:00:12.2: port 2 high speed [ 10.700049] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 10.757104] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 10.810036] ehci_hcd 0000:00:12.2: port 2 high speed [ 10.810039] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 10.881474] usb 1-2: default language 0x0409 [ 10.881724] usb 1-2: udev 2, busnum 1, minor = 1 [ 10.881725] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 10.881726] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.881728] usb 1-2: Product: USB2.0 Hub [ 10.881764] usb 1-2: uevent [ 10.881773] usb 1-2: usb_probe_device [ 10.881775] usb 1-2: configuration #1 chosen from 1 choice [ 10.882188] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 10.882199] usb 1-2:1.0: uevent [ 10.882206] hub 1-2:1.0: usb_probe_interface [ 10.882207] hub 1-2:1.0: usb_probe_interface - got id [ 10.882209] hub 1-2:1.0: USB hub found [ 10.882473] hub 1-2:1.0: 4 ports detected [ 10.882474] hub 1-2:1.0: standalone hub [ 10.882476] hub 1-2:1.0: individual port power switching [ 10.882477] hub 1-2:1.0: individual port over-current protection [ 10.882478] hub 1-2:1.0: Single TT [ 10.882479] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns) [ 10.882480] hub 1-2:1.0: Port indicators are supported [ 10.882481] hub 1-2:1.0: power on to power good time: 100ms [ 10.882848] hub 1-2:1.0: local power source is good [ 10.882849] hub 1-2:1.0: enabling power on all ports [ 10.883860] drivers/usb/core/inode.c: creating file '002' [ 10.983961] hub 1-2:1.0: port 2: status 0301 change 0001 [ 11.083356] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us] [ 11.083364] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000 [ 11.083700] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 11.152198] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 11.241187] usb 1-2.2: skipped 1 descriptor after interface [ 11.241189] usb 1-2.2: skipped 1 descriptor after interface [ 11.241685] usb 1-2.2: default language 0x0409 [ 11.243941] usb 1-2.2: udev 3, busnum 1, minor = 2 [ 11.243943] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 11.243944] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.243945] usb 1-2.2: Product: USB Receiver [ 11.243947] usb 1-2.2: Manufacturer: Logitech [ 11.243972] usb 1-2.2: uevent [ 11.243980] usb 1-2.2: usb_probe_device [ 11.243981] usb 1-2.2: configuration #1 chosen from 1 choice [ 11.251309] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0) [ 11.251324] usb 1-2.2:1.0: uevent [ 11.251334] usbhid 1-2.2:1.0: usb_probe_interface [ 11.251335] usbhid 1-2.2:1.0: usb_probe_interface - got id [ 11.251796] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 11.254692] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3 [ 11.254732] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0 [ 11.254740] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1) [ 11.254749] usb 1-2.2:1.1: uevent [ 11.254755] usbhid 1-2.2:1.1: usb_probe_interface [ 11.254757] usbhid 1-2.2:1.1: usb_probe_interface - got id [ 11.255046] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 11.260359] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4 [ 11.260368] usb 1-2.2: link qh8-0601/ffff8800c7800300 start 2 [1/2 us] [ 11.260384] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 11.260414] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1 [ 11.260427] drivers/usb/core/inode.c: creating file '003' [ 11.260438] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004 [ 11.280770] usb 1-2.2:1.0: uevent [ 11.280827] usb 1-2.2: uevent [ 11.280844] usb 1-2.2:1.0: uevent [ 11.280903] usb 1-2.2: uevent [ 11.281405] usb 1-2.2:1.1: uevent [ 11.281467] usb 1-2.2: uevent [ 11.281517] usb 1-2.2:1.0: uevent [ 11.281529] usb 1-2.2:1.0: uevent [ 11.282164] usb 1-2.2:1.1: uevent [ 11.493831] bttv0: tea5757: read timeout [ 11.493832] bttv0: tuner type=5 [ 11.505445] bttv0: audio absent, no audio device found! [ 11.525030] TUNER: Unable to find symbol tea5767_autodetection() [ 11.525033] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 11.527843] tuner-simple 0-0060: creating new instance [ 11.527846] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 11.528664] bttv0: registered device video0 [ 11.528695] bttv0: registered device vbi0 [ 11.814508] reiser4: md2: found disk format 4.0.0. [ 13.337101] hub 2-0:1.0: hub_suspend [ 13.337107] usb usb2: bus auto-suspend [ 13.337109] ehci_hcd 0000:00:13.2: suspend root hub [ 13.591267] reiser4: md3: found disk format 4.0.0. [ 55.020583] reiser4: sdc7: found disk format 4.0.0. [ 67.386552] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 67.408915] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 67.501498] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k [ 68.205087] w83627ehf: Found W83627EHG chip at 0x290 [ 68.421646] r8169: eth0: link up [ 68.421650] r8169: eth0: link up [ 70.281241] usb usb1: uevent [ 70.281269] usb 1-0:1.0: uevent [ 70.281293] usb 1-2: uevent [ 70.281320] usb 1-2.2: uevent [ 70.281346] usb 1-2.2:1.0: uevent [ 70.281533] usb 1-2.2:1.1: uevent [ 70.281706] usb 1-2:1.0: uevent [ 70.281804] usb usb2: uevent [ 70.281830] usb 2-0:1.0: uevent [ 71.272886] alloc irq_desc for 23 on node -1 [ 71.272889] alloc kstat_irqs on node -1 [ 71.272895] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) - > IRQ 23 [ 71.278891] Audigy2 value: Special config. [ 72.473408] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 72.473417] Disabling lock debugging due to kernel taint [ 72.490481] [fglrx] Maximum main memory to use for locked dma buffers: 7760 MBytes. [ 72.490559] [fglrx] vendor: 1002 device: 9501 count: 1 [ 72.490739] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 72.490750] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 72.490754] pci 0000:02:00.0: setting latency timer to 64 [ 72.490884] [fglrx] Kernel PAT support is enabled [ 72.490901] [fglrx] module loaded - fglrx 8.66.2 [Sep 1 2009] with 1 minors [ 72.668413] alloc irq_desc for 29 on node -1 [ 72.668416] alloc kstat_irqs on node -1 [ 72.668424] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X [ 72.668759] [fglrx] Firegl kernel thread PID: 3800 [ 74.787429] [fglrx] Gart USWC size:1279 M. [ 74.787431] [fglrx] Gart cacheable size:508 M. [ 74.787435] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 74.787437] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000 [ 74.787438] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 75.947153] usb 1-2.2: link qh8-0601/ffff8800c78003c0 start 3 [1/2 us] [ 616.849440] reiser4[ktxnmgrd:md1:ru(581)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 616.849445] NOTICE: md1 does not support write barriers, using synchronous write instead. [ 671.813536] reiser4[ktxnmgrd:md2:ru(2774)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 671.813541] NOTICE: md2 does not support write barriers, using synchronous write instead. [ 703.842289] reiser4[ktxnmgrd:md3:ru(2776)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 703.842293] NOTICE: md3 does not support write barriers, using synchronous write instead. ps. I have to disable c1e in bios, or video is very jerky - unless something cpu heavy runs on at least one core... |