Mybook - error 51
in [Computer]
|
From: - Bobb - on 6 May 2010 16:13 "- Bobb -" <bobb(a)noemail.123> wrote in message news:hruei2$4fe$1(a)news.eternal-september.org... > Anyone else trying to download this ? Working for you ? Using their File > Mgr I can't get a good copy. It spends an hour dloading and then when "it > successfully downloads", I check it / try to burn it, I get " file error" > in the download data . No hdd errors here. > > I'm trying once more right now. > I watched the end of the download and it checks the checksum - successfully, so it arrived here OK and wrote it to my USB drive OK , but fails to read it properly ???? I did a copy of the iso from USB drive toan internal drive and - same thing. at 97% done - gets an error. I checked errorlog and now I see hundreds of ERROR 51: Event Type: Warning Event Source: Disk Event Category: None Event ID: 51 Description: An error was detected on device \Device\Harddisk2\D during a paging operation. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I clicked the msft link and it says - if you get a lot of these replace the device: if not - ignore the error. Great - what does it MEAN ? IS there a hw problem or not ?? The usb drive is a WDC Mybook , so I went to wdc.com to check support area. No mention of the error. I figured I'd check for latest firmware. I can't read the microscopic p/n on the drive and thought they'd have a "find my WDC drive info" link - nope. I put in the windows dev mgr description (10EADS) and what it returns are articles related to the 1Tb SATA drive inside the MYbook. The first thing I see when looking at firmware online to fix known issues is : BACKUP all your data. YEah I bought 2 external Mybooks FOR backup and they want me to buy a few more so I can backup prior to new firmware. I hadn't had a need for WDC support until now - I'm not impressed. I'll download WHS V2 again later tonite and save to an internal disk.
From: - Bobb - on 6 May 2010 21:17 Saved to internal IDE drive - fine - burned/verified no problems. "- Bobb -" <bobb(a)noemail.123> wrote in message news:hrv7tb$9j1$1(a)news.eternal-september.org... > > "- Bobb -" <bobb(a)noemail.123> wrote in message > news:hruei2$4fe$1(a)news.eternal-september.org... >> Anyone else trying to download this ? Working for you ? Using their File >> Mgr I can't get a good copy. It spends an hour dloading and then when "it >> successfully downloads", I check it / try to burn it, I get " file error" >> in the download data . No hdd errors here. >> >> I'm trying once more right now. >> > I watched the end of the download and it checks the checksum - > successfully, so it arrived here OK and wrote it to my USB drive OK , but > fails to read it properly ???? I did a copy of the iso from USB drive > toan internal drive and - same thing. at 97% done - gets an error. I > checked errorlog and now I see hundreds of ERROR 51: > Event Type: Warning > Event Source: Disk > Event Category: None > Event ID: 51 > Description: An error was detected on device \Device\Harddisk2\D during a > paging operation. > For more information, see Help and Support Center at > http://go.microsoft.com/fwlink/events.asp. > > I clicked the msft link and it says - if you get a lot of these replace > the device: if not - ignore the error. Great - what does it MEAN ? IS > there a hw problem or not ?? > > The usb drive is a WDC Mybook , so I went to wdc.com to check support > area. No mention of the error. I figured I'd check for latest firmware. I > can't read the microscopic p/n on the drive and thought they'd have a > "find my WDC drive info" link - nope. > I put in the windows dev mgr description (10EADS) and what it returns are > articles related to the 1Tb SATA drive inside the MYbook. The first thing > I see when looking at firmware online to fix known issues is : BACKUP all > your data. YEah I bought 2 external Mybooks FOR backup and they want me to > buy a few more so I can backup prior to new firmware. I hadn't had a need > for WDC support until now - I'm not impressed. > I'll download WHS V2 again later tonite and save to an internal disk. > >
From: TeeJay1952 on 7 May 2010 10:54 On 5/6/2010 9:17 PM, - Bobb - wrote: > Saved to internal IDE drive - fine - burned/verified no problems. > > "- Bobb -"<bobb(a)noemail.123> wrote in message > news:hrv7tb$9j1$1(a)news.eternal-september.org... >> >> "- Bobb -"<bobb(a)noemail.123> wrote in message >> news:hruei2$4fe$1(a)news.eternal-september.org... >>> Anyone else trying to download this ? Working for you ? Using their File >>> Mgr I can't get a good copy. It spends an hour dloading and then when "it >>> successfully downloads", I check it / try to burn it, I get " file error" >>> in the download data . No hdd errors here. >>> >>> I'm trying once more right now. >>> >> I watched the end of the download and it checks the checksum - >> successfully, so it arrived here OK and wrote it to my USB drive OK , but >> fails to read it properly ???? I did a copy of the iso from USB drive >> toan internal drive and - same thing. at 97% done - gets an error. I >> checked errorlog and now I see hundreds of ERROR 51: >> Event Type: Warning >> Event Source: Disk >> Event Category: None >> Event ID: 51 >> Description: An error was detected on device \Device\Harddisk2\D during a >> paging operation. >> For more information, see Help and Support Center at >> http://go.microsoft.com/fwlink/events.asp. >> >> I clicked the msft link and it says - if you get a lot of these replace >> the device: if not - ignore the error. Great - what does it MEAN ? IS >> there a hw problem or not ?? >> >> The usb drive is a WDC Mybook , so I went to wdc.com to check support >> area. No mention of the error. I figured I'd check for latest firmware. I >> can't read the microscopic p/n on the drive and thought they'd have a >> "find my WDC drive info" link - nope. >> I put in the windows dev mgr description (10EADS) and what it returns are >> articles related to the 1Tb SATA drive inside the MYbook. The first thing >> I see when looking at firmware online to fix known issues is : BACKUP all >> your data. YEah I bought 2 external Mybooks FOR backup and they want me to >> buy a few more so I can backup prior to new firmware. I hadn't had a need >> for WDC support until now - I'm not impressed. >> I'll download WHS V2 again later tonite and save to an internal disk. >> >> > > Front USB ports are notorious for low power levels with 2 devices plugged in. Back ports have better connection.
From: - Bobb - on 7 May 2010 12:22 "TeeJay1952" <terryjoyce(a)comcast.net> wrote in message news:hs19jj$5rf$1(a)news.eternal-september.org... > On 5/6/2010 9:17 PM, - Bobb - wrote: >> Saved to internal IDE drive - fine - burned/verified no problems. >> >> "- Bobb -"<bobb(a)noemail.123> wrote in message >> news:hrv7tb$9j1$1(a)news.eternal-september.org... >>> >>> "- Bobb -"<bobb(a)noemail.123> wrote in message >>> news:hruei2$4fe$1(a)news.eternal-september.org... >>>> Anyone else trying to download this ? Working for you ? Using their >>>> File >>>> Mgr I can't get a good copy. It spends an hour dloading and then when >>>> "it >>>> successfully downloads", I check it / try to burn it, I get " file >>>> error" >>>> in the download data . No hdd errors here. >>>> >>>> I'm trying once more right now. >>>> >>> I watched the end of the download and it checks the checksum - >>> successfully, so it arrived here OK and wrote it to my USB drive OK , >>> but >>> fails to read it properly ???? I did a copy of the iso from USB drive >>> toan internal drive and - same thing. at 97% done - gets an error. I >>> checked errorlog and now I see hundreds of ERROR 51: >>> Event Type: Warning >>> Event Source: Disk >>> Event Category: None >>> Event ID: 51 >>> Description: An error was detected on device \Device\Harddisk2\D during >>> a >>> paging operation. >>> For more information, see Help and Support Center at >>> http://go.microsoft.com/fwlink/events.asp. >>> >>> I clicked the msft link and it says - if you get a lot of these replace >>> the device: if not - ignore the error. Great - what does it MEAN ? IS >>> there a hw problem or not ?? >>> >>> The usb drive is a WDC Mybook , so I went to wdc.com to check support >>> area. No mention of the error. I figured I'd check for latest firmware. >>> I >>> can't read the microscopic p/n on the drive and thought they'd have a >>> "find my WDC drive info" link - nope. >>> I put in the windows dev mgr description (10EADS) and what it returns >>> are >>> articles related to the 1Tb SATA drive inside the MYbook. The first >>> thing >>> I see when looking at firmware online to fix known issues is : BACKUP >>> all >>> your data. YEah I bought 2 external Mybooks FOR backup and they want me >>> to >>> buy a few more so I can backup prior to new firmware. I hadn't had a >>> need >>> for WDC support until now - I'm not impressed. >>> I'll download WHS V2 again later tonite and save to an internal disk. >>> >>> >> >> > Front USB ports are notorious for low power levels with 2 devices plugged > in. Back ports have better connection. It's in the back .. In the drive's USB setting see that it's setup to be 'portable' rather than setup for better throughput. Saving the file seemed OK, it's when retrieving the data to burn a DVD that it failed. Next time I have a project, I'll set to "better throughput" to see if it matters. Not sure if drive or port " error retrieving data" would make me think the drive my otherwise no errors. Just a heads up to others - if you get the problem try changing the drive setting to "better performance" rather than "portability".
From: JD on 7 May 2010 14:03
On 07/05/2010 5:22 PM, - Bobb - wrote: > "TeeJay1952"<terryjoyce(a)comcast.net> wrote in message > news:hs19jj$5rf$1(a)news.eternal-september.org... >> On 5/6/2010 9:17 PM, - Bobb - wrote: >>> Saved to internal IDE drive - fine - burned/verified no problems. >>> >>> "- Bobb -"<bobb(a)noemail.123> wrote in message >>> news:hrv7tb$9j1$1(a)news.eternal-september.org... >>>> >>>> "- Bobb -"<bobb(a)noemail.123> wrote in message >>>> news:hruei2$4fe$1(a)news.eternal-september.org... >>>>> Anyone else trying to download this ? Working for you ? Using their >>>>> File >>>>> Mgr I can't get a good copy. It spends an hour dloading and then when >>>>> "it >>>>> successfully downloads", I check it / try to burn it, I get " file >>>>> error" >>>>> in the download data . No hdd errors here. >>>>> >>>>> I'm trying once more right now. >>>>> >>>> I watched the end of the download and it checks the checksum - >>>> successfully, so it arrived here OK and wrote it to my USB drive OK , >>>> but >>>> fails to read it properly ???? I did a copy of the iso from USB drive >>>> toan internal drive and - same thing. at 97% done - gets an error. I >>>> checked errorlog and now I see hundreds of ERROR 51: >>>> Event Type: Warning >>>> Event Source: Disk >>>> Event Category: None >>>> Event ID: 51 >>>> Description: An error was detected on device \Device\Harddisk2\D during >>>> a >>>> paging operation. >>>> For more information, see Help and Support Center at >>>> http://go.microsoft.com/fwlink/events.asp. >>>> >>>> I clicked the msft link and it says - if you get a lot of these replace >>>> the device: if not - ignore the error. Great - what does it MEAN ? IS >>>> there a hw problem or not ?? >>>> >>>> The usb drive is a WDC Mybook , so I went to wdc.com to check support >>>> area. No mention of the error. I figured I'd check for latest firmware. >>>> I >>>> can't read the microscopic p/n on the drive and thought they'd have a >>>> "find my WDC drive info" link - nope. >>>> I put in the windows dev mgr description (10EADS) and what it returns >>>> are >>>> articles related to the 1Tb SATA drive inside the MYbook. The first >>>> thing >>>> I see when looking at firmware online to fix known issues is : BACKUP >>>> all >>>> your data. YEah I bought 2 external Mybooks FOR backup and they want me >>>> to >>>> buy a few more so I can backup prior to new firmware. I hadn't had a >>>> need >>>> for WDC support until now - I'm not impressed. >>>> I'll download WHS V2 again later tonite and save to an internal disk. >>>> >>>> >>> >>> >> Front USB ports are notorious for low power levels with 2 devices plugged >> in. Back ports have better connection. > > It's in the back .. In the drive's USB setting see that it's setup to be > 'portable' rather than setup for better throughput. Saving the file seemed > OK, it's when retrieving the data to burn a DVD that it failed. Next time I > have a project, I'll set to "better throughput" to see if it matters. Not > sure if drive or port " error retrieving data" would make me think the drive > my otherwise no errors. > Just a heads up to others - if you get the problem try changing the drive > setting to "better performance" rather than "portability". > > > Your hard drive might be failing if its not the interface to the hard drive (on the mybook). I tend to buy hard drive's and put them in enclosure's myself or use my "Sharkoon Drive port pro" seems that the 2.5" HDD's don't last as long as there 3.5" brothers. you should check the drive and return it if it is failing here is WD's Warranty and returns section: http://support.wdc.com/warranty/index_end.asp?lang=en JD |