Prev: component name id prefixes
Next: Relay Question
From: Jim Flanagan on 23 Jul 2010 07:32

Anyone know of a mechanical/service reference for the
B&L StereoZoom 4 focus focus assembly? In my infinite
wisdom, I disassembled mine to clean /repaint and now
cannot get it back together so that it operates smoothly..

I've found little internet information on the actual mechanical
workings of this assy, only the actual scope itself.

Tnx - Jim
From: Rich Grise on 23 Jul 2010 17:34
On Fri, 23 Jul 2010 07:32:35 -0400, Jim Flanagan wrote:
>
> Anyone know of a mechanical/service reference for the
> B&L StereoZoom 4 focus focus assembly? In my infinite wisdom, I
> disassembled mine to clean /repaint and now cannot get it back together so
> that it operates smoothly..
>
> I've found little internet information on the actual mechanical workings
> of this assy, only the actual scope itself.
>

1. You should have taken pictures while you were disassembling it.
2. Did you paint some threads?

Good Luck!
Rich

From: Jim Flanagan on 24 Jul 2010 09:32

On 7/23/2010 5:34 PM, Rich Grise wrote:
> On Fri, 23 Jul 2010 07:32:35 -0400, Jim Flanagan wrote:
>> Anyone know of a mechanical/service reference for the
>> B&L StereoZoom 4 focus focus assembly? In my infinite wisdom, I
>> disassembled mine to clean /repaint and now cannot get it back together so
>> that it operates smoothly..
>>
>> I've found little internet information on the actual mechanical workings
>> of this assy, only the actual scope itself.
>>
> 1. You should have taken pictures while you were disassembling it.
> 2. Did you paint some threads?
>
> Good Luck!
> Rich
>
Boy, do I know... I got into a hurry but I resolved the problem. It
turned out to be
an alignment issue. There must be about 8 setscrews that need tweaking
to get things just right. All is well.
Jim
 | 
Pages: 1
Prev: component name id prefixes
Next: Relay Question