UAA HD Devices in WinXP SP3
in [Setup and Deployment]
|
Prev: A problem is preventing Windows from accurately checking the license for this computer. Error Code: 0x80004005.
Next: XP 64-bit not recognizing USB devices
From: finalcl on 1 Dec 2009 04:23 Hi Eric Thanks so much for your great solution. Actually it fixed my nightmare about logon domain by cached credetial issue. Recently some of my users couldn't logon our Corp. domain while they offline at home. Finally the problem was related to the audio driver, then I found your hint to resolve the problem "Erik Chapple" wrote: > I'm not sure what you mean by this however, I was and know UAA was an issue > fixed by KB835221. The difference here is that Microsoft states that UAA HD > audio support is included (http://support.microsoft.com/kb/946480/) so there > is an assumption that no additional actions are required. In fact KB888111 > needs to be manually applied and since the process is not obvious this post > is justified. > > -- > Erik Chapple > EMC Microsoft Practice > Denver, CO > > > "Andrew E." <eckrichco(a)msn.com> wrote in message > news:D7C96741-C392-4628-9194-B2A05C5CAB77(a)microsoft.com... > > With that remark, guess you were'nt around when XP SP2 came out..... > > > > "Erik Chapple" wrote: > > > >> UAA HD AUDIO DEVICE SUPPORT IN WINDOWS XP SP3 > >> This is another MS nasty for all the deployment folks pushing XP SP3 to > >> computers with UAA HD Audio devices. Yes SP3 will support the devices and > >> the drivers are included however,, the patch IS NOT included! The update > >> to > >> KB835221, KB888111 doesn't link to the download but instructs you to call > >> MS > >> Support to get the patch which doesn't work on SP3. > >> > >> This patch is required before any of the HD device drivers are installed > >> and > >> should included in the reference PC image therefore, apply this before > >> sysprep and capture. > >> > >> 1. On the reference PC change the CSDVersion registry key to reflect XP > >> SP2: > >> a. HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=200 > >> (use > >> 512 when scripting) > >> > >> 2. Restart the PC > >> > >> 3. Install KB888111xpsp2.exe (follow the link below and rename > >> KB888111XPSP2.txt to .exe) > >> > >> 4. Change the CSDVersion key back to reflect XP SP3 again: > >> a. HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=300 > >> (use > >> 768 when scripting) > >> > >> 5. Restart the PC, finalize configuration of the reference PC, sysprep > >> and > >> capture. > >> > >> You'll need to obtain the KB888111 patch, Code for 2 SMS installer IPF > >> files > >> is below for those that want to compile and automate the above process. > >> > >> notice "UAAFix_Inst.EXE" is compiled and installed into > >> "XPSP3_UAAFix.EXE". > >> Just update the autologon information in the IPFs before compiling. > >> > >> ====================================================================== > >> UAAFix_Inst.ipf > >> ====================================================================== > >> Document Type: IPF > >> item: Global > >> Version=6.0 > >> Title English=XP SP3 UAA Fix Install > >> Flags=00000100 > >> Languages=0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > >> 0 0 > >> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > >> LanguagesList=English > >> Default Language=2 > >> Copy Default=1 > >> Japanese Font Name=MS Gothic > >> Japanese Font Size=9 > >> Start Gradient=0 0 255 > >> End Gradient=0 0 0 > >> Windows Flags=00010100000000000010110001011010 > >> Message Font=MS Sans Serif > >> Font Size=8 > >> Disk Filename=SETUP > >> Patch Flags=0000000000000001 > >> Patch Threshold=85 > >> Patch Memory=4000 > >> FTP Cluster Size=20 > >> Variable Name1=_SYS_ > >> Variable Default1=C:\WINDOWS\system32 > >> Variable Flags1=00001000 > >> Variable Name2=_SMSINSTL_ > >> Variable Default2=D:\Microsoft SMS Installer > >> Variable Flags2=00001000 > >> end > >> item: Remark > >> Text=******************************* > >> end > >> item: Remark > >> Text=Author - Erik Chapple > >> end > >> item: Remark > >> Text=Original Script Date - 05-20-2008 > >> end > >> item: Remark > >> Text=Current Script Date - 05-20-2008 > >> end > >> item: Remark > >> Text=Descripton - Installs the UAA HD Audio Fix to WinXP SP3 > >> end > >> item: Remark > >> Text=This fix must be in place and the PC restarted before installing > >> any > >> drivers. > >> end > >> item: Remark > >> Text=******************************* > >> end > >> item: Remark > >> Text=Standard Variables and Logs > >> end > >> item: Get System Information > >> Variable=USERNAME > >> Flags=00010001 > >> end > >> item: Get Environment Variable > >> Variable=WINDIR > >> Environment=WINDIR > >> end > >> item: Get Environment Variable > >> Variable=SYS32 > >> Environment=SYS32 > >> end > >> item: Set Variable > >> Variable=PROGRAMFILES > >> Value=C:\PROGRAM FILES > >> end > >> item: Set Variable > >> Variable=TEMP > >> Value=c:\windows\temp > >> end > >> item: Set Variable > >> Variable=APPTITLE > >> Value=XP SP3 UAA Fix Install > >> end > >> item: Remark > >> Text=******************************* > >> end > >> item: Install File > >> Source=F:\HDA Fix\kb888111xpsp2.exe > >> Destination=%TEMP%\kb888111xpsp2.exe > >> Flags=0000000000000010 > >> end > >> item: Execute Program > >> Pathname=%TEMP%\kb888111xpsp2.exe > >> Command Line=/passive /norestart /log:"%TEMP%\KB888111.log" > >> Flags=00000010 > >> end > >> item: Sleep > >> Sleep=3000 > >> end > >> item: Remark > >> Text=Set the CSD to SP3 > >> end > >> item: Edit Registry > >> Total Keys=1 > >> Key=SYSTEM\CurrentControlSet\Control\Windows > >> New Value=768 > >> Value Name=CSDVersion > >> Root=2 > >> Data Type=3 > >> end > >> item: Sleep > >> Sleep=3000 > >> end > >> item: Delete File > >> Pathname=%TEMP%\kb888111xpsp2.exe > >> end > >> item: Remark > >> Text=Remove AutoLogon - You MUST set the DefaultDomain value > >> end > >> item: Edit Registry > >> Total Keys=4 > >> item: Key > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > >> New Value=0 > >> Value Name=AutoAdminLogon > >> Root=2 > >> end > >> item: Key > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > >> New Value=DomainName > >> Value Name=DefaultDomainName > >> Root=2 > >> end > >> item: Key > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > >> Value Name=DefaultPassword > >> Root=2 > >> end > >> item: Key > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > >> Value Name=DefaultUserName > >> Root=2 > >> end > >> end > >> item: Execute Program > >> Pathname=c:\windows\system32\shutdown.exe > >> Command Line=-r -t 0 > >> End > >> ====================================================================== > >> XPSP3_UAAFix.ipf > >> ======================================================================== > >> Document Type: IPF > >> item: Global > >> Version=6.0 > >> Title English=XP SP3 UAA Fix > >> Flags=00000100 > >> Languages=0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > >> 0 0 > >> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > >> LanguagesList=English > >> Default Language=2 > >> Copy Default=1 > >> Japanese Font Name=MS Gothic > >> Japanese Font Size=9 > >> Start Gradient=0 0 255 > >> End Gradient=0 0 0 > >> Windows Flags=00010100000000000010110001011010 > >> Message Font=MS Sans Serif > >> Font Size=8 > >> Disk Filename=SETUP > >> Patch Flags=0000000000000001 > >> Patch Threshold=85 > >> Patch Memory=4000 > >> FTP Cluster Size=20 > >> Variable Name1=_SYS_ > >> Variable Default1=C:\WINDOWS\system32 > >> Variable Flags1=00001000 > >> Variable Name2=_SMSINSTL_ > >> Variable Default2=D:\Microsoft SMS Installer > >> Variable Flags2=00001000 > >> end > >> item: Remark > >> Text=******************************* > >> end > >> item: Remark > >> Text=Author - Erik Chapple > >> end > >> item: Remark > >> Text=Original Script Date - 05-20-2008 > >> end > >> item: Remark > >> Text=Current Script Date - 05-20-2008 > >> end > >> item: Remark > >> Text=Descripton - Installs the UAA HD Audio Fix to WinXP SP3 > >> end > >> item: Remark > >> Text=******************************* > >> end > >> item: Remark > >> Text=Standard Variables and Logs > >> end > >> item: Get System Information > >> Variable=USERNAME > >> Flags=00010001 > >> end > >> item: Get Environment Variable > >> Variable=WINDIR > >> Environment=WINDIR > >> end > >> item: Get Environment Variable > >> Variable=SYS32 > >> Environment=SYS32 > >> end > >> item: Set Variable > >> Variable=TEMP > >> Value=c:\windows\temp > >> end > >> item: Set Variable > >> Variable=PROGRAMFILES > >> Value=C:\PROGRAM FILES > >> end > >> item: Set Variable > >> Variable=APPTITLE > >> Value=XP SP3 UAA Fix > >> end > >> item: Remark > >> Text=******************************* > >> end > >> item: Remark > >> Text=Validate that the OS is XP SP3 > >> end > >> item: Get Registry Key Value > >> Variable=OS > >> Key=SYSTEM\CurrentControlSet\Control\Windows > >> Value Name=CSDVersion > >> Flags=00000100 > >> end > >> item: If/While Statement
From: smlunatick on 17 Dec 2009 14:31 On Dec 1, 9:23 am, finalcl <fina...(a)discussions.microsoft.com> wrote: > Hi Eric > > Thanks so much for your great solution. > > Actually it fixed my nightmare about logon domain by cached credetial issue. > Recently some of my users couldn't logon our Corp. domain while they offline > at home. Finally the problem was related to the audio driver, then I found > your hint to resolve the problem > > "Erik Chapple" wrote: > > I'm not sure what you mean by this however, I was and know UAA was an issue > > fixed by KB835221. The difference here is that Microsoft states that UAA HD > > audio support is included (http://support.microsoft.com/kb/946480/) so there > > is an assumption that no additional actions are required. In fact KB888111 > > needs to be manually applied and since the process is not obvious this post > > is justified. > > > -- > > Erik Chapple > > EMC Microsoft Practice > > Denver, CO > > > "Andrew E." <eckric...(a)msn.com> wrote in message > >news:D7C96741-C392-4628-9194-B2A05C5CAB77(a)microsoft.com... > > > With that remark, guess you were'nt around when XP SP2 came out...... > > > > "Erik Chapple" wrote: > > > >> UAA HD AUDIO DEVICE SUPPORT IN WINDOWS XP SP3 > > >> This is another MS nasty for all the deployment folks pushing XP SP3 to > > >> computers with UAA HD Audio devices. Yes SP3 will support the devices and > > >> the drivers are included however,, the patch IS NOT included! The update > > >> to > > >> KB835221, KB888111 doesn't link to the download but instructs you to call > > >> MS > > >> Support to get the patch which doesn't work on SP3. > > > >> This patch is required before any of the HD device drivers are installed > > >> and > > >> should included in the reference PC image therefore, apply this before > > >> sysprep and capture. > > > >> 1. On the reference PC change the CSDVersion registry key to reflect XP > > >> SP2: > > >> a. HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=200 > > >> (use > > >> 512 when scripting) > > > >> 2. Restart the PC > > > >> 3. Install KB888111xpsp2.exe (follow the link below and rename > > >> KB888111XPSP2.txt to .exe) > > > >> 4. Change the CSDVersion key back to reflect XP SP3 again: > > >> a. HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=300 > > >> (use > > >> 768 when scripting) > > > >> 5. Restart the PC, finalize configuration of the reference PC, sysprep > > >> and > > >> capture. > > > >> You'll need to obtain the KB888111 patch, Code for 2 SMS installer IPF > > >> files > > >> is below for those that want to compile and automate the above process. > > > >> notice "UAAFix_Inst.EXE" is compiled and installed into > > >> "XPSP3_UAAFix.EXE". > > >> Just update the autologon information in the IPFs before compiling. > > > >> ====================================================================== > > >> UAAFix_Inst.ipf > > >> ====================================================================== > > >> Document Type: IPF > > >> item: Global > > >> Version=6.0 > > >> Title English=XP SP3 UAA Fix Install > > >> Flags=00000100 > > >> Languages=0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > > >> 0 0 > > >> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > > >> LanguagesList=English > > >> Default Language=2 > > >> Copy Default=1 > > >> Japanese Font Name=MS Gothic > > >> Japanese Font Size=9 > > >> Start Gradient=0 0 255 > > >> End Gradient=0 0 0 > > >> Windows Flags=00010100000000000010110001011010 > > >> Message Font=MS Sans Serif > > >> Font Size=8 > > >> Disk Filename=SETUP > > >> Patch Flags=0000000000000001 > > >> Patch Threshold=85 > > >> Patch Memory=4000 > > >> FTP Cluster Size=20 > > >> Variable Name1=_SYS_ > > >> Variable Default1=C:\WINDOWS\system32 > > >> Variable Flags1=00001000 > > >> Variable Name2=_SMSINSTL_ > > >> Variable Default2=D:\Microsoft SMS Installer > > >> Variable Flags2=00001000 > > >> end > > >> item: Remark > > >> Text=******************************* > > >> end > > >> item: Remark > > >> Text=Author - Erik Chapple > > >> end > > >> item: Remark > > >> Text=Original Script Date - 05-20-2008 > > >> end > > >> item: Remark > > >> Text=Current Script Date - 05-20-2008 > > >> end > > >> item: Remark > > >> Text=Descripton - Installs the UAA HD Audio Fix to WinXP SP3 > > >> end > > >> item: Remark > > >> Text=This fix must be in place and the PC restarted before installing > > >> any > > >> drivers. > > >> end > > >> item: Remark > > >> Text=******************************* > > >> end > > >> item: Remark > > >> Text=Standard Variables and Logs > > >> end > > >> item: Get System Information > > >> Variable=USERNAME > > >> Flags=00010001 > > >> end > > >> item: Get Environment Variable > > >> Variable=WINDIR > > >> Environment=WINDIR > > >> end > > >> item: Get Environment Variable > > >> Variable=SYS32 > > >> Environment=SYS32 > > >> end > > >> item: Set Variable > > >> Variable=PROGRAMFILES > > >> Value=C:\PROGRAM FILES > > >> end > > >> item: Set Variable > > >> Variable=TEMP > > >> Value=c:\windows\temp > > >> end > > >> item: Set Variable > > >> Variable=APPTITLE > > >> Value=XP SP3 UAA Fix Install > > >> end > > >> item: Remark > > >> Text=******************************* > > >> end > > >> item: Install File > > >> Source=F:\HDA Fix\kb888111xpsp2.exe > > >> Destination=%TEMP%\kb888111xpsp2.exe > > >> Flags=0000000000000010 > > >> end > > >> item: Execute Program > > >> Pathname=%TEMP%\kb888111xpsp2.exe > > >> Command Line=/passive /norestart /log:"%TEMP%\KB888111.log" > > >> Flags=00000010 > > >> end > > >> item: Sleep > > >> Sleep=3000 > > >> end > > >> item: Remark > > >> Text=Set the CSD to SP3 > > >> end > > >> item: Edit Registry > > >> Total Keys=1 > > >> Key=SYSTEM\CurrentControlSet\Control\Windows > > >> New Value=768 > > >> Value Name=CSDVersion > > >> Root=2 > > >> Data Type=3 > > >> end > > >> item: Sleep > > >> Sleep=3000 > > >> end > > >> item: Delete File > > >> Pathname=%TEMP%\kb888111xpsp2.exe > > >> end > > >> item: Remark > > >> Text=Remove AutoLogon - You MUST set the DefaultDomain value > > >> end > > >> item: Edit Registry > > >> Total Keys=4 > > >> item: Key > > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > > >> New Value=0 > > >> Value Name=AutoAdminLogon > > >> Root=2 > > >> end > > >> item: Key > > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > > >> New Value=DomainName > > >> Value Name=DefaultDomainName > > >> Root=2 > > >> end > > >> item: Key > > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > > >> Value Name=DefaultPassword > > >> Root=2 > > >> end > > >> item: Key > > >> Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > > >> Value Name=DefaultUserName > > >> Root=2 > > >> end > > >> end > > >> item: Execute Program > > >> Pathname=c:\windows\system32\shutdown.exe > > >> Command Line=-r -t 0 > > >> End > > >> ====================================================================== > > >> XPSP3_UAAFix.ipf > > >> ======================================================================== > > >> Document Type: IPF > > >> item: Global > > >> Version=6.0 > > >> Title English=XP SP3 UAA Fix > > >> Flags=00000100 > > >> Languages=0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > > >> 0 0 > > >> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > > >> LanguagesList=English > > >> Default Language=2 > > >> Copy Default=1 > > >> Japanese Font Name=MS Gothic > > >> Japanese Font Size=9 > > >> Start Gradient=0 0 255 > > >> End Gradient=0 0 0 > > >> Windows Flags=00010100000000000010110001011010 > > >> Message Font=MS Sans Serif > > >> Font Size=8 > > >> Disk Filename=SETUP > > >> Patch Flags=0000000000000001 > > >> Patch Threshold=85 > > >> Patch Memory=4000 > > >> FTP Cluster Size=20 > > >> Variable Name1=_SYS_ > > >> Variable Default1=C:\WINDOWS\system32 > > >> Variable Flags1=00001000 > > >> Variable Name2=_SMSINSTL_ > > >> Variable Default2=D:\Microsoft SMS Installer > > >> Variable Flags2=00001000 > > >> end > > >> item: Remark > > >> Text=******************************* > > >> end > > >> item: Remark > > >> Text=Author - Erik Chapple > > >> end > > >> item: Remark > > >> Text=Original Script Date - 05-20-2008 > > >> end > > >> item: Remark > > >> Text=Current Script Date - 05-20-2008 > > >> end > > >> item: Remark > > >> Text=Descripton - Installs the UAA HD Audio Fix to WinXP SP3 > > >> end > > >> item: Remark > > >> Text=******************************* > > >> end > > >> item: Remark > > >> Text=Standard Variables and Logs > > >> end > > >> item: Get System Information > > >> Variable=USERNAME > > >> Flags=00010001 > > >> end > > >> item: Get Environment Variable > > >> Variable=WINDIR > > >> Environment=WINDIR > > >> end > > >> item: Get Environment Variable > > >> Variable=SYS32 > > >> Environment=SYS32 > > >> end > > >> item: Set Variable > > >> Variable=TEMP > > >> Value=c:\windows\temp > > >> end > > >> item: Set Variable > > >> Variable=PROGRAMFILES > > >> Value=C:\PROGRAM FILES > > >> end > > >> item: Set Variable > > >> Variable=APPTITLE > > >> Value=XP SP3 UAA Fix > > >> end > > >> item: Remark > > >> Text=******************************* > > >> end > > >> item: Remark > > >> Text=Validate that the OS is XP SP3 > > >> end > > >> item: Get Registry Key Value > > >> Variable=OS > > >> Key=SYSTEM\CurrentControlSet\Control\Windows > > >> Value Name=CSDVersion > > >> Flags=00000100 > > >> end > > >> item: If/While Statement I have been using a Realtek HD on-board audio system and most of the time the updated drivers seems to also include the UAA drivers within the download.
From: Scott Rawlins Scott on 18 Dec 2009 02:24
hi ...its been a while since you made this post .. but ive spent a ridiculous amount of hours searching for the solution to my nightmare over the last two weeks , and today you became my new god ..lol ... i cannot thank you enough for taking the time to make this post .. you may even have saved my life for if it took much longer to find a solution i think i might have put my head through the computer..lol .. thanks again :) "Erik Chapple" wrote: > UAA HD AUDIO DEVICE SUPPORT IN WINDOWS XP SP3 > This is another MS nasty for all the deployment folks pushing XP SP3 to > computers with UAA HD Audio devices. Yes SP3 will support the devices and > the drivers are included however,, the patch IS NOT included! The update to > KB835221, KB888111 doesn't link to the download but instructs you to call MS > Support to get the patch which doesn't work on SP3. > > This patch is required before any of the HD device drivers are installed and > should included in the reference PC image therefore, apply this before > sysprep and capture. > > 1. On the reference PC change the CSDVersion registry key to reflect XP SP2: > a. HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=200 (use > 512 when scripting) > > 2. Restart the PC > > 3. Install KB888111xpsp2.exe (follow the link below and rename > KB888111XPSP2.txt to .exe) > > 4. Change the CSDVersion key back to reflect XP SP3 again: > a. HKLM\SYSTEM\CurrentControlSet\Control\Windows\CSDVersion value=300 (use > 768 when scripting) > > 5. Restart the PC, finalize configuration of the reference PC, sysprep and > capture. > > You'll need to obtain the KB888111 patch, Code for 2 SMS installer IPF files > is below for those that want to compile and automate the above process. > > notice "UAAFix_Inst.EXE" is compiled and installed into "XPSP3_UAAFix.EXE". > Just update the autologon information in the IPFs before compiling. > > ====================================================================== > UAAFix_Inst.ipf > ====================================================================== > Document Type: IPF > item: Global > Version=6.0 > Title English=XP SP3 UAA Fix Install > Flags=00000100 > Languages=0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > LanguagesList=English > Default Language=2 > Copy Default=1 > Japanese Font Name=MS Gothic > Japanese Font Size=9 > Start Gradient=0 0 255 > End Gradient=0 0 0 > Windows Flags=00010100000000000010110001011010 > Message Font=MS Sans Serif > Font Size=8 > Disk Filename=SETUP > Patch Flags=0000000000000001 > Patch Threshold=85 > Patch Memory=4000 > FTP Cluster Size=20 > Variable Name1=_SYS_ > Variable Default1=C:\WINDOWS\system32 > Variable Flags1=00001000 > Variable Name2=_SMSINSTL_ > Variable Default2=D:\Microsoft SMS Installer > Variable Flags2=00001000 > end > item: Remark > Text=******************************* > end > item: Remark > Text=Author - Erik Chapple > end > item: Remark > Text=Original Script Date - 05-20-2008 > end > item: Remark > Text=Current Script Date - 05-20-2008 > end > item: Remark > Text=Descripton - Installs the UAA HD Audio Fix to WinXP SP3 > end > item: Remark > Text=This fix must be in place and the PC restarted before installing any > drivers. > end > item: Remark > Text=******************************* > end > item: Remark > Text=Standard Variables and Logs > end > item: Get System Information > Variable=USERNAME > Flags=00010001 > end > item: Get Environment Variable > Variable=WINDIR > Environment=WINDIR > end > item: Get Environment Variable > Variable=SYS32 > Environment=SYS32 > end > item: Set Variable > Variable=PROGRAMFILES > Value=C:\PROGRAM FILES > end > item: Set Variable > Variable=TEMP > Value=c:\windows\temp > end > item: Set Variable > Variable=APPTITLE > Value=XP SP3 UAA Fix Install > end > item: Remark > Text=******************************* > end > item: Install File > Source=F:\HDA Fix\kb888111xpsp2.exe > Destination=%TEMP%\kb888111xpsp2.exe > Flags=0000000000000010 > end > item: Execute Program > Pathname=%TEMP%\kb888111xpsp2.exe > Command Line=/passive /norestart /log:"%TEMP%\KB888111.log" > Flags=00000010 > end > item: Sleep > Sleep=3000 > end > item: Remark > Text=Set the CSD to SP3 > end > item: Edit Registry > Total Keys=1 > Key=SYSTEM\CurrentControlSet\Control\Windows > New Value=768 > Value Name=CSDVersion > Root=2 > Data Type=3 > end > item: Sleep > Sleep=3000 > end > item: Delete File > Pathname=%TEMP%\kb888111xpsp2.exe > end > item: Remark > Text=Remove AutoLogon - You MUST set the DefaultDomain value > end > item: Edit Registry > Total Keys=4 > item: Key > Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > New Value=0 > Value Name=AutoAdminLogon > Root=2 > end > item: Key > Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > New Value=DomainName > Value Name=DefaultDomainName > Root=2 > end > item: Key > Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > Value Name=DefaultPassword > Root=2 > end > item: Key > Key=Software\Microsoft\Windows NT\CurrentVersion\Winlogon > Value Name=DefaultUserName > Root=2 > end > end > item: Execute Program > Pathname=c:\windows\system32\shutdown.exe > Command Line=-r -t 0 > End > ====================================================================== > XPSP3_UAAFix.ipf > ======================================================================== > Document Type: IPF > item: Global > Version=6.0 > Title English=XP SP3 UAA Fix > Flags=00000100 > Languages=0 0 65 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > LanguagesList=English > Default Language=2 > Copy Default=1 > Japanese Font Name=MS Gothic > Japanese Font Size=9 > Start Gradient=0 0 255 > End Gradient=0 0 0 > Windows Flags=00010100000000000010110001011010 > Message Font=MS Sans Serif > Font Size=8 > Disk Filename=SETUP > Patch Flags=0000000000000001 > Patch Threshold=85 > Patch Memory=4000 > FTP Cluster Size=20 > Variable Name1=_SYS_ > Variable Default1=C:\WINDOWS\system32 > Variable Flags1=00001000 > Variable Name2=_SMSINSTL_ > Variable Default2=D:\Microsoft SMS Installer > Variable Flags2=00001000 > end > item: Remark > Text=******************************* > end > item: Remark > Text=Author - Erik Chapple > end > item: Remark > Text=Original Script Date - 05-20-2008 > end > item: Remark > Text=Current Script Date - 05-20-2008 > end > item: Remark > Text=Descripton - Installs the UAA HD Audio Fix to WinXP SP3 > end > item: Remark > Text=******************************* > end > item: Remark > Text=Standard Variables and Logs > end > item: Get System Information > Variable=USERNAME > Flags=00010001 > end > item: Get Environment Variable > Variable=WINDIR > Environment=WINDIR > end > item: Get Environment Variable > Variable=SYS32 > Environment=SYS32 > end > item: Set Variable > Variable=TEMP > Value=c:\windows\temp > end > item: Set Variable > Variable=PROGRAMFILES > Value=C:\PROGRAM FILES > end > item: Set Variable > Variable=APPTITLE > Value=XP SP3 UAA Fix > end > item: Remark > Text=******************************* > end > item: Remark > Text=Validate that the OS is XP SP3 > end > item: Get Registry Key Value > Variable=OS > Key=SYSTEM\CurrentControlSet\Control\Windows > Value Name=CSDVersion > Flags=00000100 > end > item: If/While Statement > Variable=OS > Value=768 > Flags=00000100 > end > item: Install File > Source=F:\HDA Fix\StandAlone Fix\UAAFix_Inst.EXE > Destination=%TEMP%\UAAFix_Inst.EXE > Flags=0000000000000010 > end > item: Remark > Text=Set CSD to SP2 and add UAAFix_Inst.exe to RunOnce > end > item: Edit Registry > Total Keys=2 > item: Key > Key=SYSTEM\CurrentControlSet\Control\Windows > New Value=512 > Value Name=CSDVersion > Root=2 > Data Type=3 > end > item: Key > Key=SOFTWARE\Microsoft\Windwos\CurrentVersion\RunOnce > New Value=c:\windows\temp\UAAFix_Inst.EXE > Value Name=SP3 UAA Audio Fix > Root=2 > end > end > item: Remark > Text=Configure AutoLogon - you MUST edit the key values for your > environment!! |