From: Nimet on
From great albania.



Michele wrote:

Load driver for RAID controller
28-Dec-07

Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks

Previous Posts In This Thread:

On Friday, December 28, 2007 3:18 PM
Michele wrote:

Load driver for RAID controller
Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks

On Friday, December 28, 2007 11:50 PM
eckrichc wrote:

Youre missing a few major areas...
Youre missing a few major areas...Just setting the BIOS for RAID controller
use
will get you nowhere,specially with an IDE hd.For RAID & RAID controller,you
need two SATA hds,once the same two are plugged into the controller,set BIOS
for RAID (usually advanced chipset),then set to boot to RAID (2nd
priority,cdrom
1st),once you exit BIOS,a post BIOS utility appears to set up a RAID set,once
thru,boot to xp cd,press F6,install RAID controller drivers,after,return to
xp cd
set up page....

"Michele" wrote:

On Saturday, December 29, 2007 1:08 PM
Michele wrote:

Maybe I didn't explain well what is my problem.
Maybe I didn't explain well what is my problem.
I have a pc that works fine with windows xp and yhe installation is on hard
disk that is attached on standard ide controller (ICH7R) but now I want to
use a RAID capability of my chipset so I bought two new hard disk and I
created a RADI 1 and clone old installation on RAID disk but when I boot
with RAID disk Windows XP fails to start and reboot automatically.
I think the problem is hard disk controller driver that is not valid now and
I want to setup new driver without fresh installation.
Thanks


"Andrew E." <eckrichco(a)msn.com> ha scritto nel messaggio
news:965CD070-4DCE-4802-987C-ECE2279E20E9(a)microsoft.com...

On Monday, January 14, 2008 2:15 AM
Bjarke Andersen wrote:

Re: Load driver for RAID controller
Delete your article, fix your date/time and repost

--
Bjarke Andersen

On Wednesday, January 30, 2008 5:13 AM
Thomas Wendell wrote:

I have to do a repair install, after cloning and subsequent removal of
I have to do a repair install, after cloning and subsequent removal of
original HD, providing (ON FLOPPY) the RAID drivers for your controller.
That's at the point when booting from the CD, it says at the bottom line
"Press F6 to install drivers" or something as such...

Repair installation advice at
http://www.michaelstevenstech.com/XPrepairinstall.htm


--
Tumppi
=================================
A lot learned from these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================




"Michele" <michael300373(a)hotmail.com> kirjoitti
viestiss?:ORuJJXkSIHA.4280(a)TK2MSFTNGP06.phx.gbl...

On Monday, February 08, 2010 7:53 AM
wilma van den broek wrote:

raid controller
download raid controller

On Monday, February 08, 2010 9:19 AM
David B. wrote:

Why are you replying to a 2 year old thread?
Why are you replying to a 2 year old thread?

--


--
"wilma van den broek" wrote in message

On Monday, February 08, 2010 6:36 PM
Russ SBITS.Biz [SBS-MVP] wrote:

Because he is using eggheadcafeinstead of a NNTP news reader :(Russ--Russell
Because he is using eggheadcafe
instead of a NNTP news reader :(
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com

On Tuesday, February 09, 2010 9:05 AM
David B. wrote:

Yeah, but even those idiots should be able to see the date of the post----
Yeah, but even those idiots should be able to see the date of the post

--


--

On Tuesday, February 09, 2010 12:54 PM
Russ SBITS.Biz [SBS-MVP] wrote:

Well they may think it is a regular "Website" forumand not a website that
Well they may think it is a regular "Website" forum
and not a website that "Copies" information..
???
I do not know maybe they all have time machines?
and we are the ones posting outside of time?
LOL
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Datagrid as ComboBox Dropdown Part 2
http://www.eggheadcafe.com/tutorials/aspnet/5af72df7-5b0b-4ac2-be96-e24127040bbf/wpf-datagrid-as-combobox.aspx
From: LD55ZRA on
Please note that you have to stop using EggheadCafe if you need any help on
these
newsgroups. The only means left for you to get help here is to use this
link:

news://msnews.microsoft.com/microsoft.public.windowsxp.hardware

Please start your post from scratch so that Pig-Bear can solve your problem.

hth

<Nimet Fejzullau> wrote in message news:201032314145metipmf(a)freemail.com...
> From great albania.
>
< snipped due to apropos of nothing!!! >



From: Peter Foldes on
Another Deadhead at Egghead

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

<Nimet Fejzullau> wrote in message news:201032314145metipmf(a)freemail.com...
> From great albania.
>
>
>
> Michele wrote:
>
> Load driver for RAID controller
> 28-Dec-07
>
> Hi, I have my pc with windows xp installed on hdd that is attached to a
> standard ide controller but now i want to use RAID capability of my
> controllor but i must load "iastorm.sys" driver to recognize disk, so it is
> possible to load new driver without a fresh installation.
> Thanks
>
> Previous Posts In This Thread:
>
> On Friday, December 28, 2007 3:18 PM
> Michele wrote:
>
> Load driver for RAID controller
> Hi, I have my pc with windows xp installed on hdd that is attached to a
> standard ide controller but now i want to use RAID capability of my
> controllor but i must load "iastorm.sys" driver to recognize disk, so it is
> possible to load new driver without a fresh installation.
> Thanks
>
> On Friday, December 28, 2007 11:50 PM
> eckrichc wrote:
>
> Youre missing a few major areas...
> Youre missing a few major areas...Just setting the BIOS for RAID controller
> use
> will get you nowhere,specially with an IDE hd.For RAID & RAID controller,you
> need two SATA hds,once the same two are plugged into the controller,set BIOS
> for RAID (usually advanced chipset),then set to boot to RAID (2nd
> priority,cdrom
> 1st),once you exit BIOS,a post BIOS utility appears to set up a RAID set,once
> thru,boot to xp cd,press F6,install RAID controller drivers,after,return to
> xp cd
> set up page....
>
> "Michele" wrote:
>
> On Saturday, December 29, 2007 1:08 PM
> Michele wrote:
>
> Maybe I didn't explain well what is my problem.
> Maybe I didn't explain well what is my problem.
> I have a pc that works fine with windows xp and yhe installation is on hard
> disk that is attached on standard ide controller (ICH7R) but now I want to
> use a RAID capability of my chipset so I bought two new hard disk and I
> created a RADI 1 and clone old installation on RAID disk but when I boot
> with RAID disk Windows XP fails to start and reboot automatically.
> I think the problem is hard disk controller driver that is not valid now and
> I want to setup new driver without fresh installation.
> Thanks
>
>
> "Andrew E." <eckrichco(a)msn.com> ha scritto nel messaggio
> news:965CD070-4DCE-4802-987C-ECE2279E20E9(a)microsoft.com...
>
> On Monday, January 14, 2008 2:15 AM
> Bjarke Andersen wrote:
>
> Re: Load driver for RAID controller
> Delete your article, fix your date/time and repost
>
> --
> Bjarke Andersen
>
> On Wednesday, January 30, 2008 5:13 AM
> Thomas Wendell wrote:
>
> I have to do a repair install, after cloning and subsequent removal of
> I have to do a repair install, after cloning and subsequent removal of
> original HD, providing (ON FLOPPY) the RAID drivers for your controller.
> That's at the point when booting from the CD, it says at the bottom line
> "Press F6 to install drivers" or something as such...
>
> Repair installation advice at
> http://www.michaelstevenstech.com/XPrepairinstall.htm
>
>
> --
> Tumppi
> =================================
> A lot learned from these newsgroups
> Helsinki, FINLAND
> (translations from/to FI not always accurate
> =================================
>
>
>
>
> "Michele" <michael300373(a)hotmail.com> kirjoitti
> viestiss?:ORuJJXkSIHA.4280(a)TK2MSFTNGP06.phx.gbl...
>
> On Monday, February 08, 2010 7:53 AM
> wilma van den broek wrote:
>
> raid controller
> download raid controller
>
> On Monday, February 08, 2010 9:19 AM
> David B. wrote:
>
> Why are you replying to a 2 year old thread?
> Why are you replying to a 2 year old thread?
>
> --
>
>
> --
> "wilma van den broek" wrote in message
>
> On Monday, February 08, 2010 6:36 PM
> Russ SBITS.Biz [SBS-MVP] wrote:
>
> Because he is using eggheadcafeinstead of a NNTP news reader :(Russ--Russell
> Because he is using eggheadcafe
> instead of a NNTP news reader :(
> Russ
>
> --
> Russell Grover - SBITS.Biz [SBS-MVP]
> Microsoft Gold Certified Partner
> Microsoft Certified Small Business Specialist
> 24hr SBS Remote Support - www.SBITS.Biz
> Question or Second Opinion - www.PersonalITConsultant.com
> Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com
>
> On Tuesday, February 09, 2010 9:05 AM
> David B. wrote:
>
> Yeah, but even those idiots should be able to see the date of the post----
> Yeah, but even those idiots should be able to see the date of the post
>
> --
>
>
> --
>
> On Tuesday, February 09, 2010 12:54 PM
> Russ SBITS.Biz [SBS-MVP] wrote:
>
> Well they may think it is a regular "Website" forumand not a website that
> Well they may think it is a regular "Website" forum
> and not a website that "Copies" information..
> ???
> I do not know maybe they all have time machines?
> and we are the ones posting outside of time?
> LOL
> Russ
>
> --
> Russell Grover - SBITS.Biz [SBS-MVP]
> Microsoft Gold Certified Partner
> Microsoft Certified Small Business Specialist
> 24hr SBS Remote Support - www.SBITS.Biz
> Question or Second Opinion - www.PersonalITConsultant.com
> Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com
>
>
> Submitted via EggHeadCafe - Software Developer Portal of Choice
> WPF Datagrid as ComboBox Dropdown Part 2
> http://www.eggheadcafe.com/tutorials/aspnet/5af72df7-5b0b-4ac2-be96-e24127040bbf/wpf-datagrid-as-combobox.aspx