Dave Ault Calls Banquers BS & Runs Him Off With Tail Between Legs
in [SolidWorks]
|
Prev: History Based Modeling (SolidWorks) Dumped And Replaced With Direct Modeling (CoCreate)
Next: Drawing speed
From: Cliff on 16 Jul 2010 21:45 On Fri, 16 Jul 2010 09:33:20 -0700 (PDT), Joe788 <joemama788(a)aol.com> wrote: >On Jul 5, 5:43�am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om> >wrote: >> �http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highligh... >> >> � Well Done !! >> -- >> Cliff > >LOL! Banquer going on and on about Qualcomm not allowing files to be >posted. He must have forgot about his mask on arc problem file he >posted, complete with Qualcomm part number. BTW, it was one of the >worst quality files I've ever seen. And it only had a few holes to drill !! Which poor clueless could not find out how to do AFTER MORE THAN TWO YEARS !!! >(Though mask on arc still worked >perfectly). Indeed it did. Anybody but that fool yonnie (bunko) bonkers could see that. Even a 12 year old that had never even seen MC before had no problems with it I heard. Can anyone still doubt that he's not even a MasterCam user of any level (or any other CAM or CAD/CAM or CAD program), much less the expert he tried to pose as? -- Cliff
From: noneya on 16 Jul 2010 22:02 On Jul 16, 9:33 am, Joe788 <joemama...(a)aol.com> wrote: > On Jul 5, 5:43 am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om> > wrote: > > > http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highligh... > > > Well Done !! > > -- > > Cliff > > LOL! Banquer going on and on about Qualcomm not allowing files to be > posted. He must have forgot about his mask on arc problem file he > posted, complete with Qualcomm part number. BTW, it was one of the > worst quality files I've ever seen. (Though mask on arc still worked > perfectly). Jon says he designs, draws,and generates tool path for employers, clients and customers whether imagined or real. He was (according to him) the resident expert at Qualcomm who was called upon to fix the engineering department and customer supplied models. So, as an expert why hasn't Jon created a sample part from scratch and post it as an example to prove his point? Maybe, just maybe Jon learned a lesson from Cliff. Where Cliff posted a sample of his CNC programming skill which turned out to be error riddled G-Code.
From: Cliff on 17 Jul 2010 02:02 On Fri, 16 Jul 2010 19:02:52 -0700 (PDT), noneya <CliffBandqueer(a)aol.com> wrote: >On Jul 16, 9:33�am, Joe788 <joemama...(a)aol.com> wrote: >> On Jul 5, 5:43�am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om> >> wrote: >> >> > �http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highligh... >> >> > � Well Done !! >> > -- >> > Cliff >> >> LOL! Banquer going on and on about Qualcomm not allowing files to be >> posted. He must have forgot about his mask on arc problem file he >> posted, complete with Qualcomm part number. BTW, it was one of the >> worst quality files I've ever seen. (Though mask on arc still worked >> perfectly). > >Jon says he designs, draws,and generates tool path for employers, >clients and customers whether imagined or real. He was (according to >him) the resident expert at Qualcomm who was called upon to fix the >engineering department and customer supplied models. > >So, as an expert why hasn't Jon created a sample part from scratch and >post it as an example to prove his point? He cannot. Would need an actual user. >Maybe, just maybe Jon learned a lesson from Cliff. Where Cliff posted >a sample of his CNC programming skill which turned out to be error >riddled G-Code. All of which followed from one error of distraction while making my point (which was well made but not grasped by a few). -- Cliff
From: noneya on 17 Jul 2010 05:29 On Jul 16, 11:02 pm, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om> wrote: > On Fri, 16 Jul 2010 19:02:52 -0700 (PDT), noneya <CliffBandqu...(a)aol.com> wrote: > >On Jul 16, 9:33 am, Joe788 <joemama...(a)aol.com> wrote: > >> On Jul 5, 5:43 am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om> > >> wrote: > > >> > http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highligh... > > >> > Well Done !! > >> > -- > >> > Cliff > > >> LOL! Banquer going on and on about Qualcomm not allowing files to be > >> posted. He must have forgot about his mask on arc problem file he > >> posted, complete with Qualcomm part number. BTW, it was one of the > >> worst quality files I've ever seen. (Though mask on arc still worked > >> perfectly). > > >Jon says he designs, draws,and generates tool path for employers, > >clients and customers whether imagined or real. He was (according to > >him) the resident expert at Qualcomm who was called upon to fix the > >engineering department and customer supplied models. > > >So, as an expert why hasn't Jon created a sample part from scratch and > >post it as an example to prove his point? > > He cannot. Would need an actual user. > > >Maybe, just maybe Jon learned a lesson from Cliff. Where Cliff posted > >a sample of his CNC programming skill which turned out to be error > >riddled G-Code. > > All of which followed from one error of distraction LOL, nice try at revisionist history but you're not fooling anyone.
From: Joe788 on 17 Jul 2010 12:21
On Jul 5, 5:43 am, Cliff <Clhuprichguessw...(a)aoltmovetheperiodc.om> wrote: > http://www.vx.com/forum/messageview.cfm?catid=4&threadid=748&highligh... > > Well Done !! > -- > Cliff Banquer has enough time to log in and out of his multiple usernames to give his usenet copy/paste/spams 5 stars, but he apparently still doesn't have time to make even a meager attempt at backing up any of the trash he's spewed. Huge surprise from Jonny Jihad the CADCAM Fraud. |