Win CE 5.0 VS2005 connect [Compact Framework]

Prev: Native Exception 0xc0000005
Next: WinScard.dll, ScardTransmit

From: Mario on 14 Aug 2006 19:57

I do not think so. Which component shoulc I check for? Thanks.

Cheers,

Mario

<ctacke/> wrote:
> Is the firewall part of the CE image? If so, make sure it's off.
>
> -Chris
>
>
> "Mario" <alphatommy(a)hotmail.com> wrote in message
> news:1155592470.743636.302550(a)m79g2000cwm.googlegroups.com...
> > Hi Chris,
> >
> > I did follow the msdn doc titled "How to: Connect Windows CE Device
> > Without ActiveSync" All steps were executed correctly until
> > deployment. From PB I checked that CMAccpet.exe and ConmanClient2.exe
> > were still running before I tried to deploy/debug the application from
> > VS2005. After going to Debug/Start Debugging, I got an error saying
> > that "There were deployment errors. Continue?" On the Error List, it
> > had "Connection failed" under Description and "Device Connectivity
> > Component" under File. I also tried to just connect to the device
> > through Tools/Connect to Device in VS2005 to no avail. The message was
> > "Connection failed. The device is not ready". All this was done while
> > ConmanClient2.exe and CMAccept.exe were still running in the device.
> >
> > Thanks.
> >
> > mario
> >
> >
> > <ctacke/> wrote:
> >> PB and Studio use totally different connection mechanisms. Installing
> >> ActiveSync is a good start - though not required. Google for connecting
> >> to
> >> a CE 5.0 device without ActiveSync for the manual method.
> >>
> >> -Chris
> >>
> >>
> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
> >> news:1155336366.654497.139320(a)i42g2000cwa.googlegroups.com...
> >> > Hi Derek,
> >> >
> >> > I am trying to deployed my application to the WinCE device. I tried to
> >> > connect the device by going to VS2005/Tools/Coonect to Device... I get
> >> > an error that ActiveSync is not installed. I guess the answer to your
> >> > last question is that I have not been able to talk to my device from
> >> > VS2005. I have not problems talking to the device from Platform
> >> > builder. Any pointers is appreciated it. Thanks.
> >> >
> >> > Cheers,
> >> >
> >> > mario
> >> >
> >> > Derek Ou wrote:
> >> >> Hi, Mario,
> >> >>
> >> >> Do you have problem just connecting VS2005 to Win CE 5.0? Or you have
> >> >> problem deploying your project after connection is set up? I assume
> >> >> that
> >> >> you are using the Remote File Viewer from Platform Builder, right?
> >> >> Have
> >> >> you
> >> >> been able to use the remote tools for VS2005?
> >> >>
> >> >> Derek
> >> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
> >> >> news:1155256396.233607.124790(a)74g2000cwt.googlegroups.com...
> >> >> > Hi Derek,
> >> >> >
> >> >> > I am having some problems in setting up the system to debug from
> >> >> > VS2005
> >> >> > as well. I am using i.MX21 ADS. The following are the steps that I
> >> >> > followed, please let me know if I missed something that you did to
> >> >> > make
> >> >> > your setup successful:
> >> >> >
> >> >> > 1. Loaded image to board.
> >> >> > 2. Copied files (Clientshutdown.exe, commanclient2.exe,
> >> >> > CMaccept.ese,
> >> >> > eDbgTL.dll, and TcpConnectionA.dll) to the Windows folder in the
> >> >> > device
> >> >> > using remote file viewer.
> >> >> > 3.Ran commanclient2.exe from device command prompt.
> >> >> > 4.Ran cMaccpet.exe from device command prompt (IP address setup in
> >> >> > VS
> >> >> > 2005 was set already).
> >> >> > 5. VS2005 Debug/Start Debugging
> >> >> >
> >> >> > After a little while, I get a message saying that it had problems
> >> >> > connecting. Did you do anything different that what I did? Thanks.
> >> >> >
> >> >> > Regards,
> >> >> > Mario
> >> >
> >

From: Mario on 14 Aug 2006 19:57

From: " ctacke/>" on 14 Aug 2006 20:11

The Firewall component.

SYSGEN_FIREWALL or
Core OS->Windows CE Devices->Communications Services and
Networking->Networking Features->Firewall

-Chris

"Mario" <alphatommy(a)hotmail.com> wrote in message
news:1155599846.270651.54770(a)b28g2000cwb.googlegroups.com...
>I do not think so. Which component shoulc I check for? Thanks.
>
> Cheers,
>
> Mario
>
>
> <ctacke/> wrote:
>> Is the firewall part of the CE image? If so, make sure it's off.
>>
>> -Chris
>>
>>
>> "Mario" <alphatommy(a)hotmail.com> wrote in message
>> news:1155592470.743636.302550(a)m79g2000cwm.googlegroups.com...
>> > Hi Chris,
>> >
>> > I did follow the msdn doc titled "How to: Connect Windows CE Device
>> > Without ActiveSync" All steps were executed correctly until
>> > deployment. From PB I checked that CMAccpet.exe and ConmanClient2.exe
>> > were still running before I tried to deploy/debug the application from
>> > VS2005. After going to Debug/Start Debugging, I got an error saying
>> > that "There were deployment errors. Continue?" On the Error List, it
>> > had "Connection failed" under Description and "Device Connectivity
>> > Component" under File. I also tried to just connect to the device
>> > through Tools/Connect to Device in VS2005 to no avail. The message was
>> > "Connection failed. The device is not ready". All this was done while
>> > ConmanClient2.exe and CMAccept.exe were still running in the device.
>> >
>> > Thanks.
>> >
>> > mario
>> >
>> >
>> > <ctacke/> wrote:
>> >> PB and Studio use totally different connection mechanisms. Installing
>> >> ActiveSync is a good start - though not required. Google for
>> >> connecting
>> >> to
>> >> a CE 5.0 device without ActiveSync for the manual method.
>> >>
>> >> -Chris
>> >>
>> >>
>> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
>> >> news:1155336366.654497.139320(a)i42g2000cwa.googlegroups.com...
>> >> > Hi Derek,
>> >> >
>> >> > I am trying to deployed my application to the WinCE device. I tried
>> >> > to
>> >> > connect the device by going to VS2005/Tools/Coonect to Device... I
>> >> > get
>> >> > an error that ActiveSync is not installed. I guess the answer to
>> >> > your
>> >> > last question is that I have not been able to talk to my device from
>> >> > VS2005. I have not problems talking to the device from Platform
>> >> > builder. Any pointers is appreciated it. Thanks.
>> >> >
>> >> > Cheers,
>> >> >
>> >> > mario
>> >> >
>> >> > Derek Ou wrote:
>> >> >> Hi, Mario,
>> >> >>
>> >> >> Do you have problem just connecting VS2005 to Win CE 5.0? Or you
>> >> >> have
>> >> >> problem deploying your project after connection is set up? I
>> >> >> assume
>> >> >> that
>> >> >> you are using the Remote File Viewer from Platform Builder, right?
>> >> >> Have
>> >> >> you
>> >> >> been able to use the remote tools for VS2005?
>> >> >>
>> >> >> Derek
>> >> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
>> >> >> news:1155256396.233607.124790(a)74g2000cwt.googlegroups.com...
>> >> >> > Hi Derek,
>> >> >> >
>> >> >> > I am having some problems in setting up the system to debug from
>> >> >> > VS2005
>> >> >> > as well. I am using i.MX21 ADS. The following are the steps
>> >> >> > that I
>> >> >> > followed, please let me know if I missed something that you did
>> >> >> > to
>> >> >> > make
>> >> >> > your setup successful:
>> >> >> >
>> >> >> > 1. Loaded image to board.
>> >> >> > 2. Copied files (Clientshutdown.exe, commanclient2.exe,
>> >> >> > CMaccept.ese,
>> >> >> > eDbgTL.dll, and TcpConnectionA.dll) to the Windows folder in the
>> >> >> > device
>> >> >> > using remote file viewer.
>> >> >> > 3.Ran commanclient2.exe from device command prompt.
>> >> >> > 4.Ran cMaccpet.exe from device command prompt (IP address setup
>> >> >> > in
>> >> >> > VS
>> >> >> > 2005 was set already).
>> >> >> > 5. VS2005 Debug/Start Debugging
>> >> >> >
>> >> >> > After a little while, I get a message saying that it had problems
>> >> >> > connecting. Did you do anything different that what I did?
>> >> >> > Thanks.
>> >> >> >
>> >> >> > Regards,
>> >> >> > Mario
>> >> >
>> >
>

From: Mario on 14 Aug 2006 20:46

Hi Chris,

I verified that firewall was not installed.

Cheers,

mario

<ctacke/> wrote:
> The Firewall component.
>
> SYSGEN_FIREWALL or
> Core OS->Windows CE Devices->Communications Services and
> Networking->Networking Features->Firewall
>
> -Chris
>
>
> "Mario" <alphatommy(a)hotmail.com> wrote in message
> news:1155599846.270651.54770(a)b28g2000cwb.googlegroups.com...
> >I do not think so. Which component shoulc I check for? Thanks.
> >
> > Cheers,
> >
> > Mario
> >
> >
> > <ctacke/> wrote:
> >> Is the firewall part of the CE image? If so, make sure it's off.
> >>
> >> -Chris
> >>
> >>
> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
> >> news:1155592470.743636.302550(a)m79g2000cwm.googlegroups.com...
> >> > Hi Chris,
> >> >
> >> > I did follow the msdn doc titled "How to: Connect Windows CE Device
> >> > Without ActiveSync" All steps were executed correctly until
> >> > deployment. From PB I checked that CMAccpet.exe and ConmanClient2.exe
> >> > were still running before I tried to deploy/debug the application from
> >> > VS2005. After going to Debug/Start Debugging, I got an error saying
> >> > that "There were deployment errors. Continue?" On the Error List, it
> >> > had "Connection failed" under Description and "Device Connectivity
> >> > Component" under File. I also tried to just connect to the device
> >> > through Tools/Connect to Device in VS2005 to no avail. The message was
> >> > "Connection failed. The device is not ready". All this was done while
> >> > ConmanClient2.exe and CMAccept.exe were still running in the device.
> >> >
> >> > Thanks.
> >> >
> >> > mario
> >> >
> >> >
> >> > <ctacke/> wrote:
> >> >> PB and Studio use totally different connection mechanisms. Installing
> >> >> ActiveSync is a good start - though not required. Google for
> >> >> connecting
> >> >> to
> >> >> a CE 5.0 device without ActiveSync for the manual method.
> >> >>
> >> >> -Chris
> >> >>
> >> >>
> >> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
> >> >> news:1155336366.654497.139320(a)i42g2000cwa.googlegroups.com...
> >> >> > Hi Derek,
> >> >> >
> >> >> > I am trying to deployed my application to the WinCE device. I tried
> >> >> > to
> >> >> > connect the device by going to VS2005/Tools/Coonect to Device... I
> >> >> > get
> >> >> > an error that ActiveSync is not installed. I guess the answer to
> >> >> > your
> >> >> > last question is that I have not been able to talk to my device from
> >> >> > VS2005. I have not problems talking to the device from Platform
> >> >> > builder. Any pointers is appreciated it. Thanks.
> >> >> >
> >> >> > Cheers,
> >> >> >
> >> >> > mario
> >> >> >
> >> >> > Derek Ou wrote:
> >> >> >> Hi, Mario,
> >> >> >>
> >> >> >> Do you have problem just connecting VS2005 to Win CE 5.0? Or you
> >> >> >> have
> >> >> >> problem deploying your project after connection is set up? I
> >> >> >> assume
> >> >> >> that
> >> >> >> you are using the Remote File Viewer from Platform Builder, right?
> >> >> >> Have
> >> >> >> you
> >> >> >> been able to use the remote tools for VS2005?
> >> >> >>
> >> >> >> Derek
> >> >> >> "Mario" <alphatommy(a)hotmail.com> wrote in message
> >> >> >> news:1155256396.233607.124790(a)74g2000cwt.googlegroups.com...
> >> >> >> > Hi Derek,
> >> >> >> >
> >> >> >> > I am having some problems in setting up the system to debug from
> >> >> >> > VS2005
> >> >> >> > as well. I am using i.MX21 ADS. The following are the steps
> >> >> >> > that I
> >> >> >> > followed, please let me know if I missed something that you did
> >> >> >> > to
> >> >> >> > make
> >> >> >> > your setup successful:
> >> >> >> >
> >> >> >> > 1. Loaded image to board.
> >> >> >> > 2. Copied files (Clientshutdown.exe, commanclient2.exe,
> >> >> >> > CMaccept.ese,
> >> >> >> > eDbgTL.dll, and TcpConnectionA.dll) to the Windows folder in the
> >> >> >> > device
> >> >> >> > using remote file viewer.
> >> >> >> > 3.Ran commanclient2.exe from device command prompt.
> >> >> >> > 4.Ran cMaccpet.exe from device command prompt (IP address setup
> >> >> >> > in
> >> >> >> > VS
> >> >> >> > 2005 was set already).
> >> >> >> > 5. VS2005 Debug/Start Debugging
> >> >> >> >
> >> >> >> > After a little while, I get a message saying that it had problems
> >> >> >> > connecting. Did you do anything different that what I did?
> >> >> >> > Thanks.
> >> >> >> >
> >> >> >> > Regards,
> >> >> >> > Mario
> >> >> >
> >> >
> >

From: Mario on 14 Aug 2006 20:46

First | Prev | Next | Last
Pages: 1 2 3 4 5 6 7
Prev: Native Exception 0xc0000005
Next: WinScard.dll, ScardTransmit