Live Sound

Yorkville -N- Riders
My question is this. I have a bunch of M.I. gear now and want to start upgrading to a more rider friendly rig. The riders that I have been privy to have all called for EAW, EV, V-dosc, Nexo etc... Has anybody done any rider specified shows with these boxes? Anybody who has any riders lying around, could I get you... 4 Jul 2006 06:53

Crossover frequency ?
Hi I'm building a stage wedge monitor with an old 12" driver and a piezo horn and read somewhere that it's better to include a crossover when doing this to reduce the tendency for the 12" driver to be very directive at the higher frequencies. I have no specs, or details at all on the 12" driver - but what would... 22 Jun 2006 12:15

EV TL Bass Cab Plans
Hey Guys, Can anyone point me to speaker enclosure plans for an EV TL cab? ... 19 Jun 2006 23:36

Mix Question
When setting up, what order do you usually start mixing down? Do you start with the kick drum or vocals? I always have problems with very LOUD stage sound from guitars. It seems like I spend all my time trying to bring everything else up around the stage level of the guitars. Makes it real hard to get a good monito... 27 Jun 2006 13:01

Subwoofers
Hi Guys, Any opinions on the following? New gear is active EV mid/tops and EV subwoofers. I read *somewhere* that, if you're using two subwoofers, it's best to place them together, rather than space them apart, under the mid/tops as, this way, they give out approx 3db more and put out a 'common' bass wave w... 19 Jun 2006 02:51

Turbosound TQ440
Does anyone know the recommended DSP settings for Turbosound TQ440s. I picked a pair of these up today ex install and the only info I could find on the website was the crossover frequency. I ran them using a DCX2496 crossing over at 1.3kHz, but it sounded like they would still need a bit of EQ, mainly in the mid ra... 30 Jul 2006 17:57

Drum Mic Kit...???
Hey guys, I am wanting to purchase a set of clip-on drum mics. I don't have a lot of money to spend so I am wondering which are the best value for money..? Any tips?? cheers.. ... 16 Jun 2006 12:49

C-Audio RA001 Power Amp
Hi, Does anyone know what the power output of a C-audio RA3001 power amp is in bridged mono mode? I have a users manual, but it doesnt give detailed specs. Tried searching in Google with no luck! I am hoping to drive the bass bins of a set of EV Eliminators with the RA3001s (I have 2) and need to know if... 16 Jun 2006 10:12

Audio Cable Reviews
Ran across this while doing some research. Really makes me wonder what listens most, these people's ears, eyes, or wallets - anyone want some snake oil to keep your cables in pristine condition? rw -- Posted via a free Usenet account from http://www.teranews.com ... 4 Jul 2006 06:53

Hyper vs Cardioid in headset mic
I don't hang out here much so I apologize in advance if I don't get back quickly. The situation is a headset mic being used by a "singing" bartender. I've been using the Countrymax Isomax (not E6) hypercardiod mics and it seems one of them in particular is picking up a lot of background noise - glasses clinking ... 12 Jun 2006 12:41